Tender For Renovation Of Toilet (Ladies & Gents) Outside Seminar Hall By Providing Pvc Ceiling, Tile Work At Wall And Floor I/C Toilet Accessories Alongwith Pine Wood Panelling And Pvc Flooring In Corridor In Department Of Bio-Sciences In Hp Universi
Tender Value
4.35 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
14 days left
EMD
8700
Bank guarantee accepted
Document Fee
413
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Toilet (Ladies & Gents) Outside Seminar Hall By Providing Pvc Ceiling, Tile Work At Wall And Floor I/C Toilet Accessories Alongwith Pine Wood Panelling And Pvc Flooring In Corridor In Department Of Bio-Sciences In Hp University, Shimla-5.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metresa) Of area 3 sq. metres and below |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately).a) Sal wood |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge (Note:- Butt hinges and necessary screws shall be paid separately)a) Second class teak woodd) 35 mm thick shutters |
| 4 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC10 asperIS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:a) 250 X 16 mm |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete:a) 150 X 10 mm |
| 6 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :a) 100 mm |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth a) Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | 15 mm cement plaster on the rough side of single or half brick wall of mix:a) 1:4 (1 cement : 4 fine sand) |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : a) For fixed portion.i)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 10 | b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)ii) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 11 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):a) With float glass panes of 5mm thickness (weight not less than 12.50kg/sqm) |
| 12 | Providing and fixing wire gauge designation 85G with wire of dia. 0.56 mm for doors, windows & clerestory windows riveted/welded with M.S. flat 20 X 3 mm all around frame (both side) and fixed in existing aluminium windows/ shutter with aluminium boards complete as per Architectural drawings and direction of Engineer-in-charge (cost of aluminium shutter and aluminium beading separately paid basis items) |
| 13 | Providing and fixing anodised aluminium coated 80-70 micron of approved shed grills of approved shed grills of approved pattern fixed in aluminium chanaling windows & ventilators i/c fixing with approved pattern ot existing windows, aluminium screws or bolts & nails complete aluminium bed frame to eb measure & paid for separately i/c carriage of materials in all lead and lift. |
| 14 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 15 | Providing and fixing suspended false ceiling Megastar, classic make PVC decorative ceiling panel of required shade size 3.02 m x0.30mx 7.00mm to 9.00mm thick made of light weight, high intensity, heat insulated flame, corrode and age resistant with no aspiration, non impenetrable by insects or termites, resistant to weather ,special chemicals, water proof and washable and of artistic feuse, including fixing of panels in lining direct to lerick /RCC/Stone/partition walls in horizontally or vertically pattern as requirement with but /tunged and grooved pointing with necessary nylon rawl plugs /fasterners fixed either with drill machine or scews at suitable /required distances including providing and fixing suitable filler /binder/corner beading/ULT jointer of 25mmx25mm x3.02mm as per site condition and requirement to fill up the gaps of corners, walls and ceiling and for making boarders. including making good the damaged surface if any complete in all respects and as per architectural drawing and as per the direction of Engineer- in -charge. |
| 16 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.a) For thickness of tiles 10 mm to 25 mm |
| 17 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.a) Marble tiles 8 mm thick (polished ) Raj Nagar |
| 18 | Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (frame work for base to be measured & paid for separately)a) 12mm thick |
| 19 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer)with water absorption less than 0.08% and conforming to I.S. 15622,of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar1:3(1cement:3coarsesand),jointing with grey cement slurry @3.3kg/sqm including grouting the joint with white cement & matching pigments etc. completea) Size of tile 600mm X 600 mm. |
| 20 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 21 | Providing and fixing 8 mm dia. C.P./ S.S. jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge. |
| 22 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.a) 32mm dia |
| 23 | Providing and fixing white vitreous china flat back half stall urinal of size 580 x 380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 24 | Providing and fixing type vitreous china pedestal type (European type/ wash down type water closet pain) |
| 25 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 26 | Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 27 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.a) 15 mm dia. nominal bore |
| 29 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931a) 15mm nominal bore |
| 30 | Providing and fixing C.P. brass bib cock of approved quality conforming. a) 15 mm nominal bore |
| 31 | Providing and fixing unplasticised P.V.C. connections pipe with PTMT nuts collar and bush of approved quality and colour. a) 15 mm nominal bore with 45 cm length. |
| 32 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.a) 450 mm long towel rail with total length of 495 mm , 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 33 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 34 | Providing and fixing veneered 12mm thick imported decorative pine wood lining/skirting with decorative surface on one face with tounged and grooved jointing and screws etc. complete (frame work and cover fillets to be measured and paid for separately. |
| 35 | Providing and fixing 19 mm thick Commercial board water proof shutter for cupboard i/c fixing with plaster pino-hinges with screws etc. complete. |
| 36 | Providing and fixing 50 mm bright finished brass cupboard or ward rob knob of approved quality with necessary screws. |
| 37 | Providing and fixing bright finished brass tower bolts (Barrel type) with necessary screws etc. complete.a) 150x10mm |
| 38 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.a) 65 mm |
| 39 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.a) Sal wood |
| 40 | Providing and fixing aluminum tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. |
| 41 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture.a) New work |
| 42 | 1.5 mm thick PVC / Rubber Tiles / Carpet flooring plain, coloured corbed or mosaic or mattled finish, laid with approved adhesive on sub floor i/e damp proofing treatment (to be measured separately ) for payment. |
| 43 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 44 | Providing and fixing hard drawn steel wire fabric 25 x 25 mm mesh of weight not less than 3.20kg per sqm to existing steel window frames etc. including 20x5 mm M.S. flat acting as beading and including welding rigidly & including a priming coat of red lead paint complete in all respect as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender