Tender For Special Repair To Gymnasium Building At I.G. Park, Bhubaneswar.
Tender Value
9.80 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
9 days left
EMD
9801
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Gymnasium Building At I.G. Park, Bhubaneswar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismentaling and removing old tiles flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete and direction of Engineer in charge. |
| 2 | Dismantling & removing doors, windows, & ventilator including removal of frame, hinges, fastening & stacking the same for reuse and removing the debris with in 50. m Lead etc. complete and direction of Engineer in charge. |
| 3 | Supplying, fitting and fixing of Window (Sliding Type) made of aluminum section 151-154, 151-155 as windows frame section as shutter frame with 5mm thick black glass as panel fittd with rubber beading friction stay including locking arrangement all cost of labour,T&P hire charges of drilling machine etc complet as per direction of Engineer-in-charge. |
| 4 | Providing and fixing natural anodized aluminium door,(frame and shutter) fabricated from extruded aluminium alloy section 9202 as per vertical member, 9201 as top member , anodized to 15 microns in silver satin mat finish, members confirming to ISI mark, partly paneled with 12mm thick pre-laminated exterior grade wood based graded ISI mark (ISI-12823) prelaminated particle board confirming to approved make, colour and shade, partly glazed using 5mm thick plain glass, including providing all necessary fittings, fixtures and handle, brass door lock, double acting floor spring, (shutter opening inside only)aluminium tower bolt, neoprine gasket, etc., as per drawing, and fixed to the walls or columns with lugs in cement concrete 1:2:4 cutting holes and mending good to all damages, including filling the gaps if any, between the frames and walls/columns, with appropriate sealant including cost of all materials, labour, conveyance, taxes, royalties, scafolding, direction of the Engineer-in-charge. |
| 5 | Supplying , Fitting and Fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-charge. |
| 6 | Providing & laying CC of prop. (1:2:4) using 12mm to 20 mm nominal size down graded, screened, washed hard black crusher broken granite chips of approved quality & from approved quarry, watering and curing etc. complete including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 7 | 25 mm A.S Flooring in C.C.(1:2:4) including punning using 12-20 mm H.G. chips. etc. complete including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 8 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead etc. complete and direction of Engineer in charge. |
| 9 | Providing 12mm thick cement plaster in cement mortar of proportion (1:6) over even surface of brick work after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 10 | Engagement of labour for removing, shifting of debris etc from inside Gym Building |
| 11 | Transporting, loading and unloading of debris like rough stone, metal,broken tiles etc. from park area to nearby dumping yeard within 5 KM distance by truck including loading unloading etc. complete and direction of Engineer in charge |
| 12 | Supply and fixing of 1000 ltr. capacity Rotational moulded Polyethylene cylindrical vertical water storage tanks conforming to IS:12701-1996 in 1st floor over a staging of 60 cm with required Fly ash brick work, RCC beam and slab as per drawing and specification including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixding Ball Valve etc. including hoisting up to a height of 5 meters above ground level and placing the tank to the required position etc. all complte as per specification and direction of Engineer-in-charge. |
| 13 | Supplying all materials,labours,T&P and Laying in trench UPVC pipe confirming to ASTM 1785 (sch 80) of the following nominal diameter with clamps and fittings including testing as per specification etc all complete as per PH specification and direction of Engineer-in-charge. |
| 14 | 50mm dia |
| 15 | 25mm dia |
| 16 | Supplying all materials,labours,T&P and fixing to wall, celling and floor UPVC pipe confirming to ASTM 1785 (sch 80) of the following nominal diameter with clamps and fittings including testing as per specification etc all complete as per PH specification and direction of Engineer-in-charge. |
| 17 | 25mm dia |
| 18 | 20mm dia |
| 19 | 40mm dia |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings including testing as per specification etc all complete as per PH specification and direction of Engineer-in-charge. |
| 21 | 25mm dia |
| 22 | 20mm dia |
| 23 | Supplying all materials, labour, T&P, fitting & fixing brass screw stop down cocks/ G M Full way valves of the following size including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 24 | 25mm dia (pvc ball valve) |
| 25 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 26 | 110mm OD PVC SWR pipe S/S ;type 'B' |
| 27 | 75mm OD PVC SWR pipe |
| 28 | 110mm PVC 'P' Trap |
| 29 | 110mm PVC Door Tee |
| 30 | 110mm Plain Tee |
| 31 | 110mm PVC Plain Bend |
| 32 | 110mm PVC Door Bend |
| 33 | 110mm PVC Cowl |
| 34 | 110mm PVC Off set Bend |
| 35 | 90mm PVC Nahani Trap |
| 36 | 75mm PVC Door Tee |
| 37 | 75mm PVC Plain Tee |
| 38 | Supplying all materials, fitting and fixing T&P Type B-1 standard bedding in haunching etc complete as per PH specification and direction of the engineer in charge. |
| 39 | Supplying all materials, labour, T&P, fitting and fixing of following Sanitary fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 40 | EWC with 'P' Trap |
| 41 | 550 x 400mm Wash Hand Basin with padestal |
| 42 | 15mm size C. P. bib cock short body 2 in 1 |
| 43 | 15mm size C. P. Angular Stop cock |
| 44 | 15mm size C. P. Pillar Cock Elbow cock type |
| 45 | 10 Ltr. Capacity L. L. Flushing Cistern (Make - Parryware / Nycer / Cera) |
| 46 | 15mmx450 mm PVC Connection pipe |
| 47 | 32mm x 600mm PVC Waste pipe (Make- Supreme / Prince / Prayas) |
| 48 | 32mm CP Waste Coupling (Make- Prayas) |
| 49 | 15mm size C. P. Flange Small |
| 50 | 15mm x 50mm C.P. Extension piece |
| 51 | 125mm C.P. Grating |
| 52 | BE Mirror (600mm X450mm) |
| 53 | Health Fuset with 15mm or 20mm inlet including polishing all complete as per specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender