Tender For Restoration Of Rain Damages To Lwss Chowkizona And Adjoining In Tehsil Pal Ur Distt. Kangra (Hp) (Sh:- Providing And Fixing 2.00 Hp Submersible Pump Set With Allied Accessories To Restoration Of Bukha Source In Gp Chowki)
Tender Value
1.62 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
1 days left
EMD
3258
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Chowkizona And Adjoining In Tehsil Pal Ur Distt. Kangra (Hp) (Sh:- Providing And Fixing 2.00 Hp Submersible Pump Set With Allied Accessories To Restoration Of Bukha Source In Gp Chowki)
BOQ
| Sl. No. | Item Description |
| 1 | Providing of 2.00 HP Submersible pump set (water field) of standard make such as kirlosker/ KSB/ Sabar Brand/ Crompton confiriming to ISI code 8034-1976 with up to date amendments. The pump should be capable of handling 50 meter head with(+)10% and (-) 25% head range and it should be operation able with 240 volts single phase AC Supply. Discharge should be 1.5 liter/ Sec. to 2 liter/ Sec. as per the satisfaction of Engineer in charge. |
| 2 | Providing of water proof cable 3 core, 2.5 mm as per IS 674-Part-II-1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer in charge. |
| 3 | Providing of high steel carban rope size 5 millimeter square for holding of submersible pump set with in all leads and lifts as per the direction of Engineer in charge. |
| 4 | Providing of 2.00 HP starter panel of standard make such as L&T /MEI/Havels / Digicon schneider/ Millo/ Crompton/ Asian installed on a wooden swotch board fixed on a wall cpable of mounting & voltmeter 0 to 300 volts capacity and ampere meter of capacity 0 to 30 ampere approved make as per the satisfaction of Engineer incharge Complete in all respect including as per the direction of Engineer in charge. |
| 5 | Providng & Fixing of HDPE water tank 2000 liters capacity of Standard make such as Diplast /Sintax/Jai Bharat duly ISI marked with 3 layer with blue/ black colour suitable cover and locking arrangement including the cost socket and check nut 32mm /40mm & 50mm dia for inlet outlet, scour for over flow pipe connected to hand pump casing complete in all respect as per direction and to the entire satisfaction of Engineer in Charge.with in all leads and lifts |
| 6 | Providing and fixing electric material for energisation of hand pump wooden board3\\" * 3'' MCBICTP including switches, wire 3/29.1/18,7/22 fuse 32 Amp. DP switch with sheet insulation switch board nut & bolt and all other petty items required for electrical connection as per requirement complete in all respect as per the satisfaction of Engineer-in- charge. |
| 7 | Providing mild stee clamp with nipple 32/40 milimeter dia welded, galvanised iron reducer 32/40 milimeter dia M. seal & PVC tapper etc. complete in all respect as per the satisfaction of Engineer in charge .with in all leads and lifts. |
| 8 | Providing ,laying, jointing and fixing 3 layer PP-R (Polypropylene random copolymer) pipe UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings complete to ISI-15801-2010 and testing of joint complete in all leads and lifts as per the direction of Engineer-in-charge. (Earth work in trenches will be extra). |
| 9 | a) 40 millimeter dia (PN-16). |
| 10 | Providing, fixing and fitting 40 millimeter dia 3-layer PP-R (Polypropylene random copolymer) male threaded socket fitting within all leads and lifts as per the direction of Engineer-in-charge. |
| 11 | Providing, fixing and fitting 40 millimeter dia3-layer PP-R (Polypropylene random copolymer) union fitting within all leads and lifts as per the direction of Engineer-in-charge. |
| 12 | Providing and laying of 32 mm dia HDPE pipe PN-6 dia meter and classes as per IS 4984-1995 grade PE-80 having pressure 20 kg/ cm2 within all leads and lifts as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender