Tender For Providing, Supplying, Installation, Testing And Commissioning Of Fire Hydrant At Pavti Jetty, Bucharwada, Diu. Dpu-2371)
Tender Value
24.53 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
4 days left
EMD
49065
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Diu → Daman and Diu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing, Supplying, Installation, Testing And Commissioning Of Fire Hydrant At Pavti Jetty, Bucharwada, Diu. Dpu-2371)
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEM |
| 2 | Providing, supplying, installing, testing and commissioning Diesel Engine Driven Fire Pump Set having capacity of 2280 LPM at 70 metre head, driven by diesel engine of minimum 69 BHP, comprising horizontal end suction, centrifugal pump with cast iron casing, bronze impeller, stainless steel shaft and mechanical seal, capable of delivering the specified discharge while maintaining a minimum pressure of 3.5 kg/cm² at the highest and farthest outlet, conforming to relevant IS standards. The pump set shall be mounted on a common fabricated MS base frame and complete with flexible coupling, coupling guard, anti-vibration pads, foundation bolts, exhaust silencer, fuel tank, starting battery with charger, control panel, pressure gauges, suction and delivery manifolds, all accessories, interconnecting piping, wiring, testing and commissioning, complete in all respects as required and as directed by the Engineer-in-Charge. (Makes: Kirloskar / or equivalent) |
| 3 | Providing, supplying, installing, testing and commissioning Common Fire Pump Control Panel, suitable for automatic and manual operation of one 50 HP electric main fire pump, one 12.5 HP electric jockey pump and one diesel engine driven standby fire pump, fabricated from CRCA sheet steel, floor/wall mounted, dust and vermin proof, powder-coated finish, comprising incomer MCCB/SFU, TPN copper bus bars, voltmeter, ammeter with CTs, indicating lamps, Star-Delta starter for main pump, DOL starter for jockey pump, phase failure and phase sequence protection relays, auto/manual selector switches, push buttons, timers, auxiliary relays, contactors, engine control module with battery charger, DC ammeter, DC voltmeter, battery charger supply indication, engine running, low oil pressure, high water temperature, overspeed and fault indication lamps, pressure switches for automatic sequential operation of pumps, interlocking arrangement, cable terminals, internal wiring, terminal blocks, earthing, gland plates and all accessories, complete with necessary control wiring, power cabling from panel to pumps, testing and commissioning, conforming to IS 8623/IEC 61439, NBC, TAC and relevant IS standards, complete as required and as directed by the Engineer-in-Charge. (Makes: L&T/Simons/Sider or equivalent) |
| 4 | Providing, supplying and fixing dial type pressure gauge of approved make, 100 mm dial diameter, calibrated from 0–15 kg/cm², complete with brass isolation cock, copper impulse pipe with fittings, connectors, nipples and accessories, mounted on main fire fighting header, including testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: H. Guru or equivalent) |
| 5 | Providing, supplying, installing, testing and commissioning Pressure Switch Assembly, factory set at 9.0 kg/cm², comprising pressure switch, isolation ball valve, pressure gauge, brass fittings, nipples, sockets, unions, copper/GI connection pipe, mounting arrangement and all necessary accessories, complete with wiring, interconnection to fire pump control panel, testing, calibration and commissioning for automatic operation of the fire fighting pump system, complete as required and as directed by the Engineer-in-Charge. (Makes: H. Guru or equivalent) |
| 6 | Providing, supplying, fixing, testing and commissioning 100 mm dia. above ground heavy duty 'C' class G.I. pipes conforming to IS: 1239 (Part-I), including cutting, threading, welding, jointing and fixing with all necessary fittings such as flanges, bends, tees, elbows, reducers, unions, sockets, clamps, hangers, MS supports, angles, channels, anchor fasteners, nuts, bolts and gaskets, including one coat of red oxide primer and two coats of synthetic enamel paint of approved shade, complete in all respects as required and as directed by the Engineer-in-Charge. (Makes: Surya Roshni / Apollo /Asian or equivalent) |
| 7 | Providing, supplying, fixing, testing and commissioning 100 mm dia. Cast Iron Butterfly Valve, PN 1.6 rating, with integrally moulded EPDM/Nitrile rubber liner, stainless steel disc, stainless steel stem, lever operated, ISI marked, suitable for fire fighting system, complete with companion flanges, nuts, bolts, gaskets and all necessary accessories, including fixing, alignment, testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: ISI/Karta or equivalent) |
| 8 | Providing, supplying, fixing, testing and commissioning 100 mm dia. Dual Plate Non-Return Valve (NRV), PN 1.6 rating, conforming to IS:5312, with cast iron body, stainless steel dual plates, stainless steel hinge pin and spring, suitable for fire fighting system, complete with rubber gaskets, G.I. bolts, nuts, washers, companion flanges and all necessary accessories, including fixing, alignment, testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: ISI/Karta or equivalent) |
| 9 | Providing, supplying, fixing, testing and commissioning Stainless Steel Single Headed Oblique Pattern Hydrant Landing Valve, ISI marked and conforming to IS:5290, with 80 mm dia flanged inlet (160 mm PCD) and 63 mm female instantaneous outlet, complete with gun metal blank cap and chain, stainless steel operating hand wheel, all necessary nuts, bolts, gaskets and fixing accessories, including testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: Newway/Safzone/Fortune/Safepro/Balaji/New Age or equivalent) |
| 10 | Providing, supplying, fixing, testing and commissioning 63 mm dia × 15 m long Reinforced Rubber Lined (RRL) Hose Pipe conforming to IS:636 Type-A, complete with 63 mm dia instantaneous gun metal male and female couplings, securely bound with G.I. wire, copper rivets and all necessary accessories, suitable for fire fighting applications, complete as required and as directed by the Engineer-in-Charge. (Makes: Newway/Safzone/Fortune/Safepro/Balaji/New Age or equivalent) |
| 11 | Providing, supplying, fixing, testing and commissioning Stainless Steel Branch Pipe with 20 mm nominal bore nozzle, conforming to IS:903, complete with 63 mm dia instantaneous type inlet coupling, suitable for connection to 63 mm RRL hose pipe, including all necessary accessories, testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: Newway/Safzone/Fortune/Safepro/Balaji/New Age or equivalent) |
| 12 | Providing, supplying, fixing, testing and commissioning First Aid Hose Reel conforming to IS:884 (latest amendments), fabricated from M.S. construction with Post Office Red stove enamel/powder-coated finish, complete with swing type hose reel drum, 20 mm dia × 30 m long thermoplastic/RRL hose, 20 mm bore gun metal shut-off nozzle, 25 mm dia gun metal stop valve, inlet pipe, hose guide, wall mounting bracket, fasteners and all necessary accessories, including testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: Newway/Safzone/Fortune/Safepro/Balaji/New Age or equivalent) |
| 13 | Providing, supplying, fixing, testing and commissioning Weatherproof Double Door Fire Hose Cabinet, wall mounting type, of size 750 mm × 600 mm × 250 mm deep, fabricated from 18 SWG mild steel sheet with hinged double doors, Allen key locking arrangement, glass front/inspection window (where specified), painted in Post Office Red with stove enamel/powder-coated finish, suitable for accommodating 2 Nos. of 63 mm × 15 m RRL hose pipes, 2 Nos. branch pipes with nozzles and 1 No. hose spanner, complete with wall mounting brackets, fixing accessories and all necessary hardware, complete as required and as directed by the Engineer-in-Charge. (Makes: Newway/Safzone/Fortune/Safepro/Balaji/New Age or equivalent) |
| 14 | Providing, supplying, fixing, testing and commissioning 25 mm (1 inch) full bore Ball Valve, PN 16, with forged brass body, chrome-plated brass ball, PTFE/Teflon seats, blow-out proof stem, quarter-turn lever operation, suitable for water supply and fire fighting applications, complete with threaded ends, nipples, unions, Teflon tape, fixing accessories, testing and commissioning, complete as required and as directed by the Engineer-in-Charge. (Makes: SANT/KARTAR or equivalent) |
| 15 | Providing, supplying, fixing and testing 100 mm dia Mild Steel Pipe Bend, fabricated from IS 2062 grade seamless/ERW pipe, suitable for 114.3 mm O.D. pipe, of 90°/45° angle with long radius (1.5D) or short radius (1.0D) as required, including cutting, welding, grinding, alignment, one coat of red oxide primer, two coats of synthetic enamel paint, and all necessary fittings, supports and accessories, complete as required and as directed by the Engineer-in-Charge. |
| 16 | Providing, supplying, fixing and testing 80 mm dia Mild Steel Pipe Bend, fabricated from IS 2062/IS 1239 grade seamless or ERW pipe, suitable for 88.9 mm O.D. pipe, of 90°/45° angle with short radius (1D) or long radius (1.5D) as required, including cutting, welding, grinding, alignment, one coat of red oxide primer, two coats of synthetic enamel paint, and all necessary fittings, supports and accessories, complete as required and as directed by the Engineer-in-Charge. |
| 17 | Providing, supplying, fixing and testing 100 mm dia Mild Steel Slip-on/Weld Neck Flange, suitable for 100 mm NB (114.3 mm O.D.) MS pipe, fabricated from IS 2062 grade steel, drilled as per ASME B16.5 Class 150/EN 1092-1 PN16 (as approved), including welding, machining, rubber insertion gasket, high tensile G.I./M.S. nuts, bolts, washers, alignment, one coat of red oxide primer, two coats of synthetic enamel paint, and all necessary accessories, complete as required and as directed by the Engineer-in-Charge. |
| 18 | Providing, supplying, fixing and testing 80 mm dia Mild Steel Slip-on/Weld Neck Flange, suitable for 80 mm NB (88.9 mm O.D.) MS pipe, fabricated from IS 2062 grade steel, drilled as per ASME B16.5 Class 150/IS 6392/EN 1092-1 PN16 (as approved), including welding, machining, rubber insertion gasket, high tensile G.I./M.S. nuts, bolts and washers, alignment, one coat of red oxide primer, two coats of synthetic enamel paint, and all necessary accessories, complete as required and as directed by the Engineer-in-Charge. |
| 19 | Providing, fabricating, supplying, welding, erecting, fixing, testing and commissioning of Mild Steel fabrication work using IS 2062 grade steel sections/plates/pipes of approved sizes and thickness, including cutting, drilling, bending, machining, welding, grinding, alignment, fitting, fastening with nuts, bolts, anchor fasteners and all necessary accessories, complete with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved shade, including loading, unloading, transportation and erection at site, complete in all respects as required and as directed by the Engineer-in-Charge. |
| 20 | Providing all labour for fabrication, installation, testing and commissioning works, including cutting, welding, drilling, grinding, fitting, erection, alignment, loading, unloading, handling, scaffolding, cleaning and all incidental operations required for complete execution of the work, complete as required and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender