Tender For Refurbishment Of Existing Restrooms Including Civil, Ph, Electrical And Other Allied Works In Various Plants And Office Buildings In Nfc-Hyderabad.
Tender Value
4.82 Crore
Estimated cost
Bid Submission
18 Sep 2026
7 days left
EMD
9.64 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Refurbishment Of Existing Restrooms Including Civil, Ph, Electrical And Other Allied Works In Various Plants And Office Buildings In Nfc-Hyderabad.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | Corrigendum BOQ | Financial Bid | 18-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | General Notes:1. The contractor shall follow relevant IS codes/technical specifications for execution of work.2. All safety & security regulations shall be followed strictly as per specifications & conditions of contract. 3. The contractor shall provide sleeveless Jackets to the workers in required pattern, colour showing name of contractor with address and telephone number as approved by the Engineer in charge. All the workers must wear the same while on duty.4. Contractor has to make his own arrangements for regulating the work by providing sign boards for Diversion, Men at Work. Danger, Work in progress, Diversions/ Change of Directions etc. at his own cost during exectutuion of work as directed by the Department.5. The contractor shall maintain good workman ship and follow safe working procedures during the work.6. Rates are inclusive of Scaffolding for all items for all heights and depths.7. Considering the exigencies of the work, site will be handed over in phased manner as per the progress of the work.8. Cutting of chases in walls/floor and making good the same including providing GI chicken mesh (if required) for electrical conduits/ switchboards/ fittings/ utility lines etc. shall be done by contractor whwerever required at no extra cost as directed by EIC.9. All items are inclusive of working under and in foul positions, muddy area etc., including pumping of water and no extra cost shall be paid for the same.10. Waterproofing works shall be carried out by specialised agency having similar work experience and shall be gotten approved by EIC. |
| 2 | EARTHWORK |
| 3 | Excavation in Trenches/foundation for septic tanks, pipes, sewers, storm water drains, footings etc in all soils except soft and hard rock at all depths from average ground level including dewatering if necessary, dressing bottom to required level, profile/slope, clearing of all the areas involving excavation of all grass,rank vegetation, shrubs,bushes,cutting of trees upto 300mm grith measured at 1.0 mtr above ground level disposing the soil within a distance of 50m, complete as directed. |
| 4 | Filling available excavated earth in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, levelling, for all leads within NFC and lifts as directed by EIC. |
| 5 | Lead charges over initial leads, including loading, unloading, stacking, the disposable Earth, rock, concrete, debris etc. by Mechanical transport for all leads within NFC, complete as directed by EIC.Note: Measurement of lead charges will be based on truck/ tractor measurements with deduction of voids @20% and 50% for soils and rocks or debris respectively. |
| 6 | CONCRETE/BRICKWORK |
| 7 | CEMENT CONCRETE of following mix using Pazzolona Portland Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Raasi, Birla, Coramandal, M/s. Andhra Cement Ltd., KCP), crushed sand and graded stone aggregates of 20 mm maximum size at and at all depths below plinth level including consolidation, finishing, curing, etc., complete but excluding formwork as per specifications and as directed by EIC. |
| 8 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete of M-25 grade (Minimum Cementations Content not less than 340 Kg/Cum) by insitu mixing using Weigh Batcher or RMC of Ultra Tech, Birla, Ready Mix up to specified level using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with crushed sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications, pumping/ lifting concrete to the required height, consolidation, finishing, curing, etc., complete as per specifications but excluding form work, centering and shuttering and steel reinforcement at all depths below and above floor level, all complete as directed by EIC. |
| 11 | Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-25 insitu mixing by weigh batching or RMC using Ordinary Portland Cement(OPC) conforming to IS 269 or Portland Pozzolana Cement (PPC) conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coramandal, M/s. Andhra Cement Ltd., KCP), crushed stone sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer of brand M/s. Fosroc ,Pidilite, Sika, BASF, Cico or approved equivalent in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings or as directed by EIC, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches/manholes etc. with and without holes including formwork but excluding reinforcement. |
| 12 | Providing centering and shuttering using steel shuttering plates vertical, horizontal, sloping including erecting, fixing, striking, removing and clearing for all cement concrete works as shown in drawings or as required including all chamfers, splays, keys, wedges, props, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces in contact with concrete, providing PVC/cement mortar cover blocks of suitable strength etc., as per Standard Practice complete as directed. in foundation plinth column flooring, machine foundation,piller,post,struts,sofits of beam,beam haunching,lintel,cantilever,girder, walls partition wall, sofits of cantilever suspended floors,landings, balconies,chajjas etc. |
| 13 | Supplying, fabricating and fixing in position reinforcement of HYSD bars/TMT bars of minimum grade Fe-500D conforming to IS 1786 from approved source of make M/s Vizag steel/ SAIL/Jindal or any approved equivalent for reinforced cement concrete items at and at all depths and heights below and above existing floor level including transporting steel to site, removing of scales, straightening, cutting, bending, fixing and tying in position with two strands of 18 guage soft drawn annealed MS binding wire, providing cement mortar 1:1 cover blocks of suitable strength, etc. complete as specified and directed. |
| 14 | Providing and laying autoclaved aerated cement blocks masonry with 150/230/300 mm thick or other required size AAC blocks of grade-1 and density 551 to 650 kg/cum of make M/s NCL, Aerocon, Greenstone in super structure below and above plinth level up to floor V level with approved block laying polymer modified adhesive mortar or in cement mortar 1:4 (1 cement : 4 coarse sand), complete as directed. |
| 15 | Brick work as per IS 2212 using fly ash bricks conforming to IS 12894 of Class Designation 7.5 and above as specified at all height and depths with cement mortar 1:6 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 6 crushed Sand} including raking out joints and simultaneously pointing the joints with the same mortar, curing, scaffolding etc.for walls, inspection chambers, manholes etc., complete as specified and directed. |
| 16 | HALF BRICK masonry as per IS 2212 using fly ash bricks at all heights/depths conforming to IS 12894 of class designation 7.5 or above as specified in partitions walls in cement mortar 1:4 (1 cement: 4 crushed sand), including scaffolding, raking out joints, curing etc. complete and with Reinforced Cement Concrete (RCC) M15 (1:2:4) stiffeners of depth 75mm at every 900 mm height including form work, curing etc., complete as specified and directed, but excluding reinforcement. Note: Reinforcement will be measured and paid for separately under relevant item of schedule. |
| 17 | FINISHING WORKS |
| 18 | Cement plastering 15 mm thick for internal walls using ready made plaster in cement mortar (1cement:4 Sand) of make M/s Enduraplast, Walplast, Ultratech or approved equivalent fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC , providing & fixing GI plaster mesh/chicken mesh 150 mm wide along route of walls chipped for service lines, junction between RCC and brick walls and also other places wherever required over brick walls or concrete surface, preparation of surface, hacking of surface, steel/tubular scaffolding curing etc., complete as specified and directed. |
| 19 | Cement plastering 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level using ready mixed plaster of make M/s Enduraplast, Walplast, Ultratech or approved equivalent with 12mm thick base coat in Cement Mortar 1:4, 8mm thick finishing coat in Cement Mortar 1:4 , final rendering, making necessary grooves, bands, drip moulds, providing & fixing GI plaster mesh/chicken mesh 150 mm wide along route of walls chipped for service lines, junction between RCC and brick walls and also other places wherever required over brick walls or concrete surface, preparation of surface, hacking of surface, steel/tubular scaffolding curing etc., complete as specified and directed. |
| 20 | Making good the damaged portion of walls with cement mortar mix/ready mixed plaster of make M/s Enduraplast, Walplast, Ultratech or approved equivalent (1 cement: 4 coarse sand) of thickness 20mm to 40mm at all height above plinth level over brick walls or concrete surface to restore the level of surface after removal of wall tiles/replacement of pipeline, including fixing of chicken mesh, hacking over surfaces wherever required, scaffolding curing etc., complete as specified and directed. |
| 21 | Providing neat cement punning etc complete all as per specifications and as directed by EIC. |
| 22 | Applying 2 (Two) coats of ready made putty of average thickness 1 mm of Birla wall care/J.K. Wall putty over plastered wall surface including cleaning the surface with steel scrapper, wire brush, sand paper etc., filling in crevices, holes, cracks with approved filler etc., finishing the surface neat and smooth without any undulations as specified and directed at all height including required scaffolding. |
| 23 | INTERNAL PAINTING:- Supplying and applying two or more coats of interior luxury emulsion paint with high sheen, stain resistant and antibacterial/antifungal properties of make Asian (Royal advanced/sheen luxury emulsion) or approved equivalent including providing one coat of approved suitable interior primer at all heights above plinth level, including cleaning the surface, surface preparation, rubbing with sand paper, scraping of the existing loose paint with putty knife, filling of holes with putty, filling of cracks with fosroc renderoc CF/CS or approved equivalent, complete and as directed. |
| 24 | EXTERIOR PAINTING :- Applying of Two or more coat of elastomeric liquid applied water proofing membrane of asain paint damp proof advance or Dulux Aquatech Flexible damp proof base coat as per manufacture specification.Finishing walls with 2 or more coat of 100% Premium acrylic Smooth waterproof exterior finish emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Dept Tinted) with silicon additives, equal to asain paint ultmia protek or Dulux Professional weathershield Flexx or Paints can be obtained from approved make from M/s. Asian, Dulux, Berger, Johnson & Nicklson, Nerolac, Pidilite or any other make etc., including surface preparation, scrubbing, sand papering, removing of loose paint, plaster, dirt, etc., filling of cracks, holes with crack filler of make fosroc renderoc CS/CF or approved equivalent complete and as directed. |
| 25 | Painting with synthetic enamel paint in two or more coats coats including providing a coat of appropriate primer of Asian/Berger/Nerolac make of 1st quality with required shade on walls, concrete surfaces, wooden/steel doors, windows, ventilators, composite units, louvers, rolling shutters, hand rail and balustrades, plastered surfaces etc., including scaffolding, preparing the existing surface smooth by sand papering, preparing the surface, brushing with wire brushes, scraping with steel scrapper etc., filling in crevices and cracks etc. with approved filler etc., complete as specified and directed. |
| 26 | Removing dry or oil bound distemper, white or colour wash/lime punning/ water proofing cement paint and the like by scrapping, sand papering, buffing using manual/mechanical methods and preparing the surface smooth including necessary repairs to scratches etc. complete as per directions of EIC |
| 27 | DISMANTLING |
| 28 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as specified and directed. |
| 29 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 30 | Dismantling very carefully the existing Brick masonry in cement motor with plastering on both sides including wall tiles, old pipelines, if any very carefully at depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacing of useful materials and disposing the unserviceable debris within the lead of 50m, etc., complete as specified and directed. |
| 31 | Dismantling the existing aluminum/wooden/MS/Metallic/Non-metallic doors/windows/partition/rolling shutters/cupboards of all types carefully removing of glass panels, particle boards,chowkhats, holdfasts, fixtures, fittings etc., with all necessary scaffolding and stacking properly at a distance of 100m and depositing the same in NFC store as directed by the Engineer-in-charge |
| 32 | Dismantling the existing mosaic/ceramic/vitrified tiles, shahabad/kotah stone PVC flooring etc., in flooring / dado/skirting etc. including dismantling, bedding mortar and disposing the debris within anywhere in NFC for all leads as directed by Engineer-in-Charge. |
| 33 | DISMANTLING OLD PLASTER, raking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within anywhere in NFC for all leads. etc., complete as specified and directed. |
| 34 | Dismantling of old IWC/EWC with trap/Flush Tanks or cisterns/urinals/urinal partition/wash basins including fittings if any at site including removal of cistern if required, complete with disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge |
| 35 | PLUMBING |
| 36 | Providing, laying, jointing, fixing, testing and painting as per color code of NFC heavy quality (Class ‘C’) M. S. GALVANISED PIPES as per IS:1239 (TATA/Jindal or equivalent make) including heavy quality HB fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other fittings required for the completion except screwed flanges confirming to IS:1239 and also as per the code of practice of water supply in buildings IS:2065 including removing of exisitng G.I. pipes and fixtures if any, laying under the floors, making holes/chasing in walls, roof slabs and making good the same to the original condition including cost of all jointing material like hemp yarn, white or red lead/Teflon tape, clamps, wooden gutties, screws, cement and painting with two coats of anticorrosive bitumastic paint for embedded portion and two coats of synthetic enamel paint over a coat of zinc chromate/red oxide primer etc., complete including pressure testing the pipes with clean water as per specifications and connecting to existing supply lines or fittings and fixtures as the case may be. |
| 37 | 15 mm n. b. |
| 38 | 20 mm n. b. |
| 39 | 25 mm n. b. |
| 40 | 32 mm n. b. |
| 41 | 40 mm n. b. |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11) conforming to IS 15778 of Ashirvad/Supreme or approved make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, MABT, FABT, fittings required for making connection with existing GI/CPVC line etc., i/c fixing the pipe on exposed/recessed/underground surfaces to correct line, level, plumb using clamps as directed. This includes removing of existing pipes and fixtures/CP fittings if required, jointing of pipes & fittings with one step CPVC solvent cement, teflon tape, cost of making holes/ cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition including testing of joints at certain locations complete as specified and directed |
| 43 | Nominal Bore (NB) pipe: 15 mm |
| 44 | Nominal Bore (NB) pipe: 20 mm |
| 45 | Nominal Bore (NB) pipe: 25 mm |
| 46 | Nominal Bore (NB) pipe: 32 mm |
| 47 | Nominal Bore (NB) pipe: 40 mm |
| 48 | Nominal Bore (NB) pipe: 50 mm |
| 49 | Providing and fixing in position CPVC ball valves of following sizes of Ashirvad/Supreme make confirming to SDR 11 fittings, including jointing material etc, as specified and directed. |
| 50 | 20 mm DN |
| 51 | 25 mm DN |
| 52 | 32 mm DN |
| 53 | 40 mm DN |
| 54 | 50 mm DN |
| 55 | Supplying and fixing following size pushfit/solfit uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) of Grade B laid in floor, underground, concealed & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, clamps, etc, complete as specified and directed. |
| 56 | 50mm DN |
| 57 | 75 mm DN |
| 58 | 110 mm DN |
| 59 | 160 mm DN |
| 60 | Providing uPVC Floor Trap / Nahani Trap of following size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed |
| 61 | Nahani Trap of 110 X 75mm size of Ashirvad (70001249)/Supreme make |
| 62 | Multifloor trap of 110 x 75 x 50 mm size of Ashirvad (70001252)/Supreme make |
| 63 | Providing and fixing of best quality PVC P trap for urinals of size 110mm X 110mm of Ashirvad (70002811)/Supreme make or approved equivalent with CP grating on top including necessary 1:2:4 cement concrete for embedding the trap connecting the trap to waste pipe, etc, complete as specified and directed. |
| 64 | Providing and fixing in position UPVC bottle Gully Trap of Supreme /Ashirvad make of 160 X 110mm sizes including embedding the trap in 1:2:4 cement concrete, construction of brick masonry chamber in 230 mm thick brick masonry in cement mortar 1:4 over cement concrete bed of 1:3:6 of 100 mm thick, embedding the trap, plastering with cement mortar 1:4, 12 mm thick on inside & outside and all exposed surfaces, finished with a floating coat of neat cement, providing and fixing heavy duty C. I. frame and cover of size 300mmX300mm, 40mm thick cement concrete 1:2:4 bed over brickwork, painting the grating frame and cover with 2 coats of approved anticorrosive bitumastic paint, necessary connection with existing line etc., complete as directed. |
| 65 | Providing & laying structured wall UPVC under ground drainage pipes & fittings (SN-8) of Ashirvad/Supreme make for sewer lines of following size conforming to IS:16098 (Part-1) to proper level & grade, jointing including providing coupler with cement solvent / welded joints / as per manufacturer's requirement, UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc, connecting with existing manholes, including making holes in manholes and grouting with GP2 grout after fixing of pipe, complete as specified and directed by EIC. |
| 66 | 110 mm DN |
| 67 | 160 mm DN |
| 68 | Providing and fixing 160mm N.B. HDPE pipes of 6kg/sqm, best quality of Godavari/Supreme or approved make conforming to as per IS:14333 Latest Edition (with Amendment) Material Grade PE 100 with moulded fitting like pipe end, Flage, Blank Flanges, tree etc. whever necessary jointing by fusion welding or any approved method, laying pipe line in single lengths without joints or pieces between chambers including providing inspection vents in chambers, supplying & fixing jointing materials like bolts, nuts, gaskets, testing etc.,as specified and directed. |
| 69 | Providing and fixing EUROPEAN WATER CLOSET of size close to the dimensions 575 x 355 x 395 mm of Hindware (20147 (S-100) or 20146 (P-180))/ Jaquar or approved equivalent , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required, as specified and directed |
| 70 | Providing and fixing one piece EUROPEAN WATER CLOSET of Hindware(Cat no. 20190) or approved equivalent , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor/ wall wherever required including the cost of mounting nuts and bolts with washers. |
| 71 | Providing and fixing wall mounted EUROPEAN WATER CLOSET of size close to the dimensions 530 x 330 x 390 mm of Hindware (20098 (P-255))/ Jaquar or approved equivalent , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required, as specified and directed |
| 72 | Providing and fixing concealed flushing cistern (Cico/Jaquar/Hindware(Cat no. 525066 make) half frame/ full frame with all internal PVC fittings, half frame drain pipe set mounted on a pair of brackets of heavy quality with with bend of required length with all tools, synthetic adhesive, gasket etc. removing the existing cistern if required, complete including connection to W. C. |
| 73 | Providing and fixing approved ORRISA PATTERN W.C. of soze close to 580mm X 440mm of Hindware(Cat no. 20042)/ Jaquar or approved equivalent in white glazed vitreous chinaware, size mm with 'P' or 'S' trap, conforming to IS: 2556. |
| 74 | Providing and fixing single flush PVC low level flushing cistern of 10 litres capacity conforming to IS: 7231 (Cico/Jaquar/Hindware(Cat no. 511209 make) with all internal PVC fittings mounted on a pair of brackets of heavy quality with 32 mm n. b. PVC flush pipe with bend of required length with all tools, synthetic adhesive, gasket etc., complete including connection to W. C. |
| 75 | Providing and fixing heavy quality solid plastic seat with lid for European Type water closet of Hindware/Jaquar or approved equivalent. |
| 76 | Providing and fixingin toilets Health faucet of Hindware CAT no. F160193/Jaquar or equivelent with 1.2 meter long SS flexible pipe with wall hook or as per manufacturer's specifications in Chrome finish and wall hook etc. complete as directed.. |
| 77 | Providing and fixing 40 mm n. b.C. P. brass single flush valve along with wall flange/plate of make Jaquar/hindware (Cat no.F860074 ) or equivalent and other required accessories/fittings , including making recess in wall, flush pipe and connecting the valve with concealed water supply pipe. |
| 78 | Providing and fixing 15 mm n. b. heavy quality PVC connector pipe suitable for hot and cold water for Cisterns, Wash basins, gyesers, urinals of suitable length with CP brass unions ends of ZOLOTO/HINDWARE/JAQUAR make. |
| 79 | Providing and fixing URINAL of size close to 300 mm x 330 mm x 450 mm of M/s.Jaquar /Hindware (Cat no. 60023) make screwed to wall/dado with full threaded C.P. brass waste coupling to urinal, spreader, drain pipe etc, complete as specified. |
| 80 | Providing and fixing in position of best quality rectangular shaped urinal PARTITION with frosted glass (8mm thick) of size 450mmX900MM of Jaquar /Hindware (Cat no. SU81OSC-S-STD-CR) make or approved equivalent, if required as directed by Engineer-in-charge. |
| 81 | Providing and fixing best quality WASH BASIN without pedestal of size 500 mm X 400mm , comprising best Indian make (Hindware (Cat no 10127)/Jaquer wash basin white glazed, vitreous chinaware conforming to IS: 2556 Part IV supported on suitable wall brackets of heavy quality and of size mentioned above, including CP brass waste coupling, as directed by Engineer-in-charge. |
| 82 | Providing and fixing CP Brass 32mm size heavy quality Bottle Trap of approved quality & make Jaquar / Hindware (Cat no. F850015) or approved equivalent, inluding extension pipe if required, as per the direction of Engineer-in-charge. |
| 83 | Providing and fixing 32mm/40mm dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 84 | Providing and fixing heavy quality 15mm C. P. brass wall mounted BIB TAPS of Hindware (Cat no. F690004)/Jaquar/Jaquar make or equivalent with wall flange confirming to IS:8931. |
| 85 | Providing and fixing heavy quality 15 mm C. P. brass Long body BIB TAPS of Hindware(F690006)/Jaquar/Jaguar make or equivalent with wall flange and confirming to IS:8931. |
| 86 | Providing and fixing heavy quality 15 mm C. P. brass Pillar cock / Long neck pillar cock of Jaquar /Hindware make (F690001or F690003 ) or equivalent confirming to IS:8931. |
| 87 | Providing and fixing heavy quality 15 mm C. P. brass 2 way bib cock of Hindware (F690005)/Jaquar make or equivalent with wall flange and confirming to IS:8931. |
| 88 | Providing and fixing 15 mm n. b. heavy quality C. P. brass angle valve confirming to IS 8931 of make hindware (F690043)/Jaquar or equivalent. |
| 89 | Providing and fixing 15 mm n. b. heavy quality C. P. brass Push Type urinal angle valve confirming to IS 8931 of make Jaquar/hindware (F310016) or equivalent. |
| 90 | Providing and fixing heavy quality 25mm C. P. brass Concealed control valve with stick type handle of Jaquar/Hindware (F860064) make or equivalent with wall flange and confirming to IS:8931 including making provision in wall for the same. |
| 91 | Providing and fixing heavy quality 15 mm C. P. brass Non Telephonic wall mixer of Jaquar /Hindware(F690016) wall flange and confirming to IS:8931. |
| 92 | Providing and fixing heavy quality 15 mm C. P. brass 3 in 1 wall mixer of Hindware(F690020) wall flange and confirming to IS:8931. |
| 93 | Providing and fixing heavy quality 15 mm C. P. brass Deck Mounted Sink Cock with swivel spout of Hindware make (F690024) or equivalent confirming to IS:8931. |
| 94 | Providing and fixing decorative round shaped C. P. brass SHOWER ROSE if dia 200mm without arm of make Jaquar/ Hindware(F160044) or approved equivalent |
| 95 | Providing and fixing decorative round shaped C. P. brass long shower arm of 450mm length of make Jaquar/ Hindware (F160024) or approved equivalent |
| 96 | Providing and fixing C. P. brass TOWEL RAIL of approved design and make of 600mm length, fixed to wall with C. P. brass screws, screwed on to rawl plugs etc., complete of Hindware (F102012)/Jaquar or equivalent. |
| 97 | Providing and fixing CP brass soap dish of make hindware(F580004)/Jaquar or equivalent. |
| 98 | Providing and fixing 150X150 mm CP brass Toilet Paper Roll Holder with cover of Hindware(F102009)/Jaquar or equivalent as specified and directed |
| 99 | Providing and fixing C. P. brass Twin Robe Hook, fixed to wall with C. P. brass screws, screwed on to rawl plugs etc., complete of Hindware/Jaquar or equivalent. |
| 100 | Providing and fixing SS 304 Cloth Hanger with Six hooks, fixed to wall or doors with C. P. brass screws, screwed on to rawl plugs etc., complete as directed by Emgineer-in-charge. |
| 101 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 102 | Providing and fixing fixed grab bar for differently abled of Dolphy make (DHGB0014) or approved equivalent of size 600mm consisting of stainless steel tube with nylon grip, complete as directed by Engineer-in-charge. |
| 103 | Supplying of following items to the CMS store as per the direction of Engineer-in-charge |
| 104 | Supplying of PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P. H.D. plastic ball of supreme or equivalent.-15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 105 | Supplying of PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.-20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 106 | Supplying of PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball of supreme or equivalent.-25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 107 | Supplying of PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.-40 mm nominal bore, 206mm long, weighing not less than 690 gms |
| 108 | Supplying Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings |
| 109 | Supplying of 15 mm brass spindle for taps, quater or half or full trun as per requirement. |
| 110 | Supplying of 15 mm PVC connector pipe suitabole for hot and cold water make Zoloto/Kohinoor |
| 111 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank/tanks, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without the base support for tank. |
| 112 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 113 | TILING WORKS |
| 114 | Providing & fixing glazed vitrified tiles/double charge vitrified tiles of polished/matte/anti-skid/rustic finish of size 600mmX600mm/1200mmX600mm/800mmX800mm and thickness as per manufacturer's specifications conforming to IS 15622 for flooring ( thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid on 20 mm thick cement mortar 1:4 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.): 4 coarse sand) or polymer modified adhesive of make MYK/Roff or approved equivalent including providing joints of 2mm/3mm with spacers filled with epoxy grout mix of 0.7 kg of organic coated filler of desired shade (0.1 Kg of hardener and 0.2 Kg of resin per kg or as specified by manufacturer ) of make Pidilite, MYK of required color. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 115 | Providing & fixing glazed vitrified tiles/double charge vitrified tiles of polished/matte/anti-skid/rustic finish of size 600mmX600mm/ 1200mmX600mm/ 800mmX800mm/ 300mmX600mm and thickness as per manufacturer's specifications for dado, skirting, risers of steps (thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid using suitable high polymer modified quick-set tile adhesives (Water based) of Roff/MYK or approved equivalent, providing joints of 2mm/3mm with spacers, filling of joints with matching epoxy grout mix of 0.7 kg of organic coated filler of desired shade (0.1 Kg of hardener and 0.2 Kg of resin per kg or as specified by manufacturer ) of make MYK, pidilite of required color, as required, complete as specified and directed. |
| 116 | Providing and fixing 16 to18 mm thick gang saw cut, mirror polished, premoulded and prepolished /honed /leathered/ lappato or in combination machine cut Granite stone for floor/treads/ risers /steps / dado/ ramps/window sills/jambs/wash basin platforms etc. of required size, approved shade, colour and texture laid over minimum 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse crushed stone sand)/ 12 mm thick, 1:3 (1 cement : 3 coarse crushed stone sand) cement mortar/chemical adhesive, joints treated with epoxy grout, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, making cutouts in granite for washbasin/pillar taps/any other fittings etc. complete at all levels including cost of single/double nosing, making 3 no of grooves for saircase treads etc. all complete as specified and as directed. |
| 117 | Constructing wash basin platform of approximate width 600mm and maximum length upto 3 meters using two machine polished granite slabs (each 16mm to 18mm thick) fixed back to back with araldite including making openings in granite for under the counter wash basins, holes for pillar taps, moulding, rubbing and polishing of cut edges, making recess in the wall, inserting the platform in the wall till 40mm, grouting with cementious grout of Fosroc (Conbexrtra GP2) or approved make, forming nosing at the edges of the counter, etc, complete as specified and directed. |
| 118 | DOORS/WINDOWS/VENTILATORS/CARPENTRY |
| 119 | Providing and fixing factory made single extruded WPC (Wood polymer Composite) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT of following sizes comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length including two coats of wood primer and two coats of wood enamel paint or PVC laminate sheet/PVC foil as per manufacturer's specifications, complete as per direction of Engineer in Charge. Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 120 | WPC door frame (75mm X 50mm) |
| 121 | WPC door frame (100X65) |
| 122 | Providing and fixing factory made Decorative (laminated)/Plain single extruded WPC (wood polymer composite) solid plain flush door shutter of following size comprising of virgin PVC polymer of K value 57-60, calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives having minimum density of 650 kg/cum manufactured by RAJSHRI or equivalent, screw withdrawl strength of 1800N(Face) & 900N(Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardent and complete as directed. |
| 123 | 30mm solid WPC flush door shutter-plain including painting on both sides |
| 124 | 35mm solid WPC flush door shutter-decorative (laminated on both sides). |
| 125 | Providing & fixing stainless steel of grade SS304 SS tower bolts for doors of min size 200 X10mm size of make Godrej/kich or approved equivalent with necessary screws and hardware complete as specified and directed . |
| 126 | Supply |
| 127 | Installation |
| 128 | Providing & fixing stainless steel of grade SS304 SS tower bolts for doors of min size 100 X10mm size of make Godrej/kich or approved equivalent with necessary screws and hardware complete as specified and directed . |
| 129 | Supply |
| 130 | Installation |
| 131 | Providing and fixing Heavy quality Stainless Steel plain joint hinges of grade SS 304 for doors with 4 nos. of bearings of minimum size 125mmX75mmX3mm of make Godrej(code-2708)/kich or approved equivalent with necessary SS screws, hardware etc complete as directed. |
| 132 | Supply |
| 133 | Installation |
| 134 | Providing and fixing Heavy quality Stainless Steel plain joint hinges for doors with of minimum size 100mmX60mmX2.5mm of make Godrej(code-4365)/kich or approved equivalent with necessary SS screws, hardware etc complete as directed. |
| 135 | Supply |
| 136 | Installation |
| 137 | Providing and fixing set of Stainless Steel of grade SS 304 door handles of size 150mmx19mm for both sides of door of make Kich (code-PRDH1906S)/Godrej or approved equivalent with necessary SS screws, hardware etc complete as directed. |
| 138 | Supply |
| 139 | Installation |
| 140 | Providing and fixing set of Stainless Steel of grade SS 304 door handles 'C' type of size 200mmx22mm for both sides of door of make Kich (code-PRDHC2208S)/Godrej or approved equivalent with necessary SS screws, hardware etc complete as directed. |
| 141 | Supply |
| 142 | Installation |
| 143 | Providing and fixing Stainless Steel aldrop of size 16mm X 250mm, make Godrej(code-2282) or approved equivalent with necessary SS screws etc complete as directed. |
| 144 | Supply |
| 145 | Installation |
| 146 | Providing and fixing Stainless Steel aldrop of size 12mm X 200mm make Godrej(code-2284) or approved equivalent with necessary SS screws etc complete as directed. |
| 147 | Supply |
| 148 | Installation |
| 149 | Providing and fixing hanging floor door stopper, ISI marked, Stainless steel size:242 x 174 x 115mm of make Godrej(code-9467) or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 150 | Supply |
| 151 | Installation |
| 152 | Supplying and fixing at and at all heights above plinth level hydraulic door closures of ‘EVERITE’/Godrej make or approved equivalent confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed.Suggested Model: Godrej Cerus Universal door closer, Product code: 5285, 85 kg door capacity |
| 153 | Supply |
| 154 | Installation |
| 155 | Providing and fixing factory made uPVC white colour sliding/fixed/casement glazed windows/ventilators of make Greentech/Salamander or approved equivalent extrusions comprising of uPVC multi-chambered frame sliding window consisting of two and half track three panels with two glazed and one wire mesh panels made of frame 85 mm and above X 40 mm and above & sash 30 mm and above x 55 mm and above & fly screen sash 20mm and above X 50 mm and above having wall thickness of 2.0 ± 0.2 mm, duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), including providing and fixing glazing made of 6mm thick toughened glass (tinted/frosted/clear) of make Saint Gobain/ Modiguard , SS304 wire mesh, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, aluminium channel for roller track, nylon rollers, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws and other necessary hardware etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's viz. rollers, striker, locks of DNV make or approved equivalent and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Note: Size of UPVC fixed/casement windows/ventilators shall be as per manufacturer's specifications and as directed by EIC. |
| 156 | Providing and fixing in position epoxy powder coated (minimum thickness of power coating 50 microns)Aluminium partition /Grills/ door/ windows/ ventilators/ louvers with single/double side hung/tophung/sliding shutters etc. using extruded built up standard tubular and other sections of approved make (Jindal Delux Series (Domal)/Hindalco/Indal sections or its approved equivalent sections) and confirming to IS 733 and IS 1285 of required available colour, manufactured to relevant IS Standard Specifications including applying Epoxy coating of required thickness, fixing with rawl plugs and screws or fixing with clips or with expansion hold fastners, including locks/locking arrangement for doors/windows, handles, mortice locks, aldrops, tower bolts, door stopper, magnetic catcher, hinges, friction hinges, aluminium push plates, sliding rollers, aluminium hardware fixtures, cleat angles, beadings etc as per the requirement, gaps of structural opening to aluminium frame work to be filled with siliconate / polysulphide sealant, fixed suitably to brick wall RCC column structures complete as directed.NOTE: Aluminium sections such as shutter frames, window / door frame, beading channel for glass/adjustable louvers/mosquito mesh, door handles, louvers etc., shall only be measured linearly as per actual / finished cutting size and multiplied with sectional weight of the individual section and the total quantity of aluminium section will be arrived at for payment without any allowance for wastage. No separate payment shall be made for fittings such as locks/locking arrangement, hinges, friction hinges, rollers, door stoppers, magnetic catchers, fittings and fixtures, gasket, cleat angles etc. |
| 157 | Providing and fixing glazing with 5 mm thick plain float glass of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing and as directed for window shutters and ventilators. |
| 158 | Supplying and Fixing in position Mosquito/Fly proof stainless steel wire mesh of grade 304, with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood/aluminium beading as specified and directed complete. Note: Aluminium beading will be paid under relavant item. |
| 159 | WATERPROOFING |
| 160 | Providing and mixing integral crystalline admixture of M/s Pidilite/Fosroc/Cika/BASF make for water proofing tretament to RCC structures at the time of transporting of concrete into the drum of RMC truck, as per manufacturer's specifications. The material shall meet the requirement as specified in ACI-212-3R-2010 i.e. by reducing the permeability of concrete by more than 90%, compared with control concrete as per DIN 1048. The crystalline admixture shall be capable of self-healing of cracks upto a width of 0.5mm. The work shall be carried out all complete as per specifications and the direction of Engineer-in-charge. |
| 161 | Providing and applying Water pproofing treatment for bathrooms, water closets etc. using ultra flexible polymer modified elastomeric waterproof coating, brick bats and cement based waterproofing in followng steps: |
| 162 | Providing and applying Ultra flexible polymer modified elastomeric waterproof coating for bathrooms using Brushbond Ultraflex of Fosroc Chemicals or approved equivalent in following steps:Surface preparation: RCC surface shall be made dry, clean, even and checked for soundness. Oil, dirt, laitance and other contaminants shall be removed manually.Surface shall be fairly smooth finished using polymer modified mortar. Chamfering of the floor wall junctions shall be done with cement mortar 1:4 admixed with Nitobond SBR @ 2 litres per 50 kg bag of cement. Inlet Outlet Pipe Annular space packing shall be done using Conbextra GP2 of Fosroc Chemicals mixed water in ratio 0.16. Pond testing shall be done for 48 hours, 50mm height and leaking spots, construction joints and honey combs shall be provided with Injection grouting using cementitious pressure grouting method with 40 psi pump using Cebex 100 of Fosroc Chemicals @ 225gms mixed to 50 kg bag of cement including joints packing using polymer modified mortar, Exposing, cleaning and filling cracks observed in RCC slab/any concrete surface with polymer modified mortar compound/PU sealant complete as per manufacturer's specification or as directed by EIC. Waterproof Coating: Apply Ultra flexible polymer modified elastomeric waterproof coating of 1mm thickness in 2 coats at a coverage rate of 16 sqm per 25 kg bag with interval period of 6 hours over a substrate with Saturated Surface Dry condition. Termination to be done on wall extending the coating to min.300mm height above the finished floor level and sealed in the termination groove of 20mm wide and 10mm deep flushed with polymer modified mortar as per manufacturer's recommendation or as directed by EICSupplying and sprinkling of Fine sand while the polymer modified elastomeric waterproof coating is in tacky condition. Providing and laying plastering of 18mm thickness for floors and 12mm thickness for walls in CM 1:4 mixed with integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement. System include necessary preparation, curing with water, chemicals used, labour, etc as per specification complete before providing screed concrete / brick bat coba / cinder filling. |
| 163 | Providing water proof brick bat coba with cement mortar 1:5 admixed with water proofing chemical of Fosroc/Pidilite or approved make for filling in the depressed portions of toilets, bath rooms etc., as per the specifications of specialized waterproofing agencies and finishing the top surface with 1:4 cement mortar mixed with water proofing chemical so as to be suitable to receive the tiles etc. testing the treatment for water tightness by impounding water for 7 days etc., complete. |
| 164 | Providing cement based waterproofing treatment to the sunken floor of water closets, bath rooms, nahanis from inside at all heights above plinth level giving injections to the concrete surface as required with cement and approved waterproofing compound of Fosroc(Conplast WL Xtra @ 200ml per bag of cement)/Pidilite or approved equivalent to fill up all inherent holes, voids, honey-combs, etc., in the concrete, applying waterproof plaster of about 25 mm thick for the floor area of the depression and about 18 mm on the side walls of the depression and continue the vertical treatment if necessary on the walls above proposed floor finish. |
| 165 | Injection Grouting using Cementitious grout admixed with SBR - Styrene Bitadiene Styrene.Providing and Fixing 18mm/12 mm or any other dia GI/PVC nozzles (the nozzle shall be embedded about half the depth of the member to be grouted) in grid pattern at a spacing not more than 1m c/c along damaged/distressed area and in construction joints by drilling holes using drill machine and to be packed with polymer modified mortar of make Pidilite/Fosroc /SIKA/BASF/ Sunanda/ Krishna or any other approved equivalent make., grouting to be carried out with cement grout by mixing one bag of cement with one pouch of expansive plasticising admixture and 1 kg of SBR latex of make Pidilite (Dr Fixit Pidicrete AM and Dr fixit Pidicrete URP)/Fosroc or approved equivalent, removal of nozzles post grouting and plugging with Renderoc Plug of Fosroc or approved equivalent, complete as directed by EIC. (Record shall be maintained for number of grout holes and cement consumption in each hole) |
| 166 | Miscellaneous Items |
| 167 | Providing grouting (including tamping) for foundations, structures, equipments, base plates, anchor holes, etc., with non-shrink, free flow grout of Fosroc Cobextra GP-2 or equivalent mixed with well graded aggregate as per manufacturer's specifications, including shuttering wherever necessary at and at all depths and heights below and above plinth level complete as specified and directed.Note: Only the weight of grout used shall be measured for payment. Aggregate shall be provided in the grout mix if required at no extra cost and will not be measured for payment. |
| 168 | Providing and fixing in position galvanised chemical anchors of dia upto 24mm and length upto 300mm of minimum 5.8 grade of approved make of Hilti, Fischer, Fosroc of best quality for anchoring supporting structural steel columns/beams or other members including drilling holes of required dia in RCC, cleaning of holes, providing and injecting chemical/injection mortar of make Fischer (FIS EM plus), Fosroc (Lokfix E77) or approved equivalent with hand gun, aligning bolts to position, proper level, washers, Labour, etc., complete as per manufacturer's specifications and as directed. |
| 169 | Placing shear connectors of upto 32 mm dia TMT re-bar into the RCC member including drilling necessary holes to required depth using drill machine, cleaning the holes and removing dust, dirt , etc and supplying and anchoring with epoxy based resin grout material of Fosroc Lokfix E77 or equivalent make complete with cost of materials, labour, tools as per specifications and directions of engineer in charge. NOTE: Reinforcement for Shear Connectors shall be measured seperately for payment. |
| 170 | Supply and installaiton of 1 seater modular mobile toilet with cubicle of minimum size 1220mm X 1220mm X 1980 mm height with following specifications:Plumbing and sanitary fittings: Standard Ceramic EWC or IWC with flush tank and neccessary fittings such as connector pipe, flush pipe, angle cock etc, water tank of 200 litres storage capacityCPVC pipeline for internal water supply and provision for connection from main supply line. One two way tap with standard health faucet. One Nahani trap for drainage of floor waterDrainage line with PVC pipe with provision for connection of drainage to main sewer line.Frame of MS angle of suitable size.Roof and Side panel: material: Zero spangled cold rolled 120 GSMgalvanised(galvano) powder coated 40mm thick EPS panel (EPS Density-16Kg/CuM, EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA), 250mm roof projection from all sidesDoor Panel: Zero spangled cold rolled 120 GSMgalvanised(galvano) powder coated with necessary stiffeners and Aluminium accessories (2 AI handles, 1 AI tower bolt, 1 AI aldrop and steel sheet thickness 0.6mm 275MPA) with 3 hingesFloor material: Anti skid finish floorElectrical: Tube light with fitting, internal wiring and switch, provision for connection from main line for electrical supply. Note: 1) The drawing/specifications/lauout of the mobile toilet shall be approved by EIC before procurement. 2) 4 no.s of Lifting hooks of adequate strength to be provided rigidly attached to structural frame. 3) Civil foundation works required for installation will be paid in relevant seperate items.4) The external water connection of mobile toilet shall be made with the nearest water supply point. The drainage connection shall be made with nearest manhole/chamber including making of hole in the manhole/chamber and filling with cementitious non shrink grout of fosroc GP2 or approved equivalent. The payment of water supply and drainage pipeline will be made under relevant item. 5) Upon removal of mobile toilet, the drainage and water supply connections shall be carefully removed and shall be made dummy with suitable accessories. 6) Installation/re-installation of mobile toilet shall include all necessary lifting tools/tackles/equipment, cranes of required capacity as per site conditions etc. No extra payment will be made for the same. |
| 171 | Supply |
| 172 | Installation and commissioning at any location in NFC, NUFAP premises and DAE colony |
| 173 | Careful removal and shifting to next location anywhere within NFC, NUFAP premises and DAE colony. |
| 174 | Supply and installation of FRP security cabin of size 8' X 6' X 7' height, 2.5' door width with following specifications:3mm FRP layer wallMS frame angle of suitable size25mm Gap between inner and outer wall filled with 32kg/cum PU foam3 windows of powder coated sliding aluminium windows of size 4' X 4' with 4mm thick glass and SS mesh panelOne lockable powder coated aluminium door frame with shutter partly paneled and partly glazed, thickness of 5mm glassOne 4 feet tubelight, one wall mounted fan, provision for telephone connection and 2 electrical sockets (16A) with switches, internal electrical wiring as per relevant IS codes.Roof shape: single moulded pyramid shapeNote: 1) 4 no.s of Lifting hooks of adequate strength to be provided rigidly attached to structural frame. Civil foundation works required for installation will be paid in relevant seperate items.2) Mechanical/chemical anchor, if required, for the fixing of cabin to the floor shall be provided at no extra cost. |
| 175 | Supply |
| 176 | Installation Please Enable Macros to View BoQ information |
| 177 | Installation Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Sep 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender