Tender For Special Repair To Building No. Owt-694 At Likabali Mil Stn
Tender Value
34.27 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
68540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhemaji → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No. Owt-694 At Likabali Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | DATE | Date | 21-Sep-2026 |
| 2 | 11-Sep-2026 | Revised BOQ | BOQ | 21-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed. |
| 3 | M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and as dircted |
| 4 | M & L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and as dircted |
| 5 | M&L Coloured Glazed Ceramic Tiles 300x200x7.0mm thick (1st quality as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 6 | Demolition in Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 7 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. |
| 8 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 9 | S&F Steel work in (sqare/ Rectangle) tubular trusses, rafter, purlins, post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming toAFe- 290 (Gde E- 165) complete all as specified and directed. |
| 10 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings any thickness |
| 11 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 13 | Demolition of brick work or stone masonry or PCC block manonry built in cement mortar including all quoins, pillars, arches etc.complete all as specified and directed. |
| 14 | M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 15 | M & L for Providing Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls in width and setting in mortar 1:6 complete all as specified and directed. |
| 16 | M & L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specified and directed. |
| 17 | Taking down cement plaster of any description including racking out joints, hacking for keys , scrubing down with water etc complete all as specified. |
| 18 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and smooth without using extra cement, complete all as specified & directed |
| 19 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. |
| 20 | M & L applying two coats of distemper oil emulsion paint over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering over a coat of 3mm thick wall care putty on new or undecorated wall surface including preparation of surfaces complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint overa coat of alkal resistant primer complete all as specified & directed |
| 22 | Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed |
| 23 | S&F Hangers 4mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long size of grid 605 x 605mm complete all as specified and as directed |
| 24 | S&F anodised aluminium snap grid frame work for false ceiling of size of grid 605x605 mm complete all as specified and as directed |
| 25 | S&F HSPC Non-Asbestos Fibre Cement Building Boards 6.0mm thick in Ceiling, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed. |
| 26 | Taking down ,Chowkhats or frames with shutters (without taking off shutters from the frames) of any description, n exc. 1.50Sqm each, complete all as specified and as directed. |
| 27 | S & F Powder coated aluminium sections (minimum 50 micron) of approved colour as in door, window, ventilator frames, partitions with one or more rebates and door, windows shutters sliding/openable type/ventilator shutter including provision of necessary jointing cleats, glazing clips, neoprene rubber packing, powder coated aluminium snap beading, screws inclding provision of suitable size of powder coated aluminium fittings such as locking arangements, handles, stainless steel fiction hinges and tower bolts etc including fixing only glass panels/particle board panels/wire gauge/aluminium grill etc complete all as specified and directed. (Note : (i) The size of aluminium sections shall be all as specified in relevant IS Code and MES Schedule Part-I (ii) Glass panels/ Wire gauge etc shall be measured paid seperately as supply only rates under respective items here-in-below). |
| 28 | S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | Material & labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty / beads in square, area exc 0.5 Sqm in each pane complete all as specified and directed. |
| 30 | Demolition of reinforced (reinforcement cut as required to facilitate demolition) cement concrete in ground floors and paving not exceeding 15 cm thickness( below or above ground level) complete all as specified and directed. |
| 31 | M&L for nominal mix Type B1 1:2:4 (20mm graded stone aggregate) as in roof beams, lintel bands, cantilevers, bressumers, lintel over 1.5mtr span.complete all as specified & directed. |
| 32 | M&L for nominal mix Type B1 1:2:4 (20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves |
| 33 | Use & waste Formwork flat rough finished surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick |
| 34 | M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 35 | Formwork to sides and soffits of floor or roof beams, lintel bands, beam haunchings, girders, lintels, cantilevers etc complete all as specified & directed. |
| 36 | M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar (1:6) work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces complete all as specified and as directed |
| 37 | M&L mild steel TMT bars 10mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed. |
| 38 | M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking bending hooking ends spirally and binding as in stirrups, spacers and binders etc complete all as specified & directed. |
| 39 | M&L for preparation of old steel surface of any description over 10 cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. |
| 40 | M&L for preparation of New steel surface of any description over 10 cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. |
| 41 | Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) of any description, exc. 1.50Sqm but not exc. 4.00 Sqm each, complete all as specified and as directed. |
| 42 | M&L Cutting Holes in Brick/ Pre-cast Concrete Block Walling, not exc. Half Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and Adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed. |
| 43 | M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed. |
| 44 | M&L Mild Steel Bands, Straps, Supports or Stays for Rain Water, Ventilating Pipes including Bolts (if required), Heavy Hooks (Stay) for Large Gates; Hook and Pintle Hinges, Large Hasps and Staples; Clamps; Holdfasts (Flat Iron 25x4.0mm); Wall Ties; Hooks for Hanging Fans; Plain Angle Cleats for securing Purlins to Wood Trusses or Rafters; Knee Piece inserts; 2-way and 3-way Straps, Plate Washers and Similar Small Articles, conform to Fe-290 Gde-E-165, complete all as specified and as directed. |
| 45 | S&F Flush Shutter 35mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick, fixed with Nails, complete all as specified and as directed. |
| 46 | S&F Solid PVC Door Frame of Size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed. |
| 47 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild Steel Frame shall be covered with Heat Moulded Plain Color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side & Gap insert for Top Rail & Bottom Rail, Paneling of Plain Color PVC sheet to be fitted in the Mild Steel Frame, welded/sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement, complete all as specified and as directed.NOTE : Builders Hardware will be Measured and Paid seperately under appropriate Items. |
| 48 | S & F Powder coated aluminium sections (minimum 50 micron) of approved colour as in slelton door, frames, partitions with one or more rebates and door, shutters including provision of necessary jointing cleats, glazing clips, neoprene rubber packing, powder coated aluminium snap beading, screws inclding provision of suitable size of powder coated aluminium fittings such as locking arangements, handles, stainless steel fiction hinges and tower bolts etc complete all as specified and directed. |
| 49 | S&F Aluminium anodised Barrel Tower Bolt, 125mm long (as approved), Extruded Section, complete all as specified and as directed. |
| 50 | S&F Aluminium anodised Barrel Tower Bolt, 150mm long (as approved), Extruded Section, complete all as specified and as directed. |
| 51 | S&F Aluminium alloy, anodised, Sliding Door Bolt 300mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed. |
| 52 | S&F Stainless Steel Butt Hinge 75mm in size (as approved), complete all as specified and as directed. |
| 53 | S&F Stainless Steel Butt Hinge 100mm in size (as approved), complete all as specified and as directed. |
| 54 | S&F Aluminium Handle 125mm in size (as approved), anodised, Cast type, complete all as specified and as directed. |
| 55 | S&F Aluminium Handle 150mm in size (as approved), anodised, Cast type, complete all as specified and as directed. |
| 56 | M&L for preparation of new painted surfaces of wood or wood based surfaces of any description exc 10 cmwidth or girth and applyingtwo coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | M&L for preparation of old painted surface of cement bonded particle, board/asbestos cemet surface of any description over 10 cm girth or width , not otherwise desribed and applying one coat of Synthetic enamel paint on walls and ceiling surface complete all as directed. |
| 58 | S & F Vitreous China squatting pan of pattern rimless single piece WC with UF soft close seat cover, hinges , dual flushing cistern fittings, fixings accessories and size 395x710x730mm with ‘P’ trap, complete all as specified and directed. |
| 59 | S & F for vitreous china thin Rim table top wash basin white flat back, size 6450x500x130mm complete all as specified and directed. |
| 60 | S & F 615 X 445mm oval shape swivel mirror of selected quality all around beading and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and directed. |
| 61 | S & F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed. |
| 62 | S & F for Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 63 | S&F in repair Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and , complete all as specified and as directed. |
| 64 | S&F pillar taps fancy type cast copper alloy with capstan heads, chromium plated quarter turn [form flow] high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for union pipe and fixed to 15mm dia pipe all as directed. |
| 65 | Supply and fix in repairs stop / Angle valves cast copper alloy, screwed down high pressure with capastan head screwed both ends 15 mm bore fancy type chromium plated with long shank and cup suitable complete all as specified and as directed. |
| 66 | S & F PVC connection 15 mm bore and 45 to 60 cm long all as specified and as dirtected. |
| 67 | Taking down steel tubing 15 mm bore and connections and removal to store. |
| 68 | S & F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 13.5 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 69 | Taking down steel tubing 20 mm bore and connections and removal to store. |
| 70 | S & F 25mm CPVC pipes SDR 11 & Plain CPVC SDR 13.5 fittings on walls/ceiling or laying in floors, complete all as specified and as directed. |
| 71 | Dismantling existing water storage tanks exc 500 litres but n.exc 1000 litres capacity and removal from site complete all as specified. |
| 72 | 1000 litres capacilty, roational moulded polythylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position including GI tank nipple & with union (two Nos each) fittings and making necessary connections to make the tank functional complete all as specified and directed. |
| 73 | S&F ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (minium weight 20mm-210gms) complete all as specified and directed. |
| 74 | S&F in repair 20mm bore Gun metal globe or gate valves with iron wheel head, screwed both complete all as specified and directed. |
| 75 | S&F in repair toitet Paper Holder, Vitreous China, Coloured, Box type of approved Size with Brass Chromoum Plated with Rod to hold Paper Roll, fixed to Walls with Brass Chromium plated Screws , complete all as specified and as directed |
| 76 | S&F in repair Chromium Plated Shower Rose with Shower Arm 125mm, Swival Joint including fixing to Steel Pipe and complete all as specified and as directed. |
| 77 | S&F in repair Hand Shower (Health Faucet) with Inner Flexible Tube not less than 1.20 Metre in Length and Wall Hook complete all as specified and as directed. |
| 78 | S&F in repair Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats complete all as specified and as directed. |
| 79 | M&L Cast Iron Floor Trap, Diameter of Outlet in 100mm, Plain with Grating including Jointing with Waste Pipe, Set in Cement Concrete 1:2:4 (20mm graded Aggregate) and Fixing-in-repairs, complete all as specified and as directed. |
| 80 | S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc. including Taking down/ out Unserviceable Pipe of any description, complete all as specified and as directed. |
| 81 | S&F in repair PVC (SWR) 110mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement complete all as specified and as directed. |
| 82 | S&F PVC (SWR) 110mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 83 | S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc. including Taking down/ out Unserviceable Pipe of any description, complete all as specified and as directed. |
| 84 | S&F in repair PVC (SWR) 75mm bore (dia) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings, jointing with Solvent Cement complete all as specified and as directed. |
| 85 | S&F PVC (SWR) 75mm bore (dia) Junction, Single (Single T) Equal or Unequal, etc., jointing with Solvent Cement , complete all as specified and as directed. |
| 86 | S&F PVC (SWR) Vent Cowl 110mm bore (dia), jointing with Solvent Cement and Fixing-in-repairs, complete all as specified and as directed. |
| 87 | S&F in repair stainless steel Grating 100mm in dia (as approved) with Waste Hole, setting and complete all as specified and as directed. |
| 88 | S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated (as approved) and suitable for Wash Down Water Closet Pan (Pedestal Pattern) complete all as specified and as directed. |
| 89 | Supply & fix 25mm dia MS fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed. |
| 90 | Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed. |
| 91 | M&L for PCC 1:3:6 Type C-2 using 40mm graded stone aggregate as in in walls or retaining walls, any thickness, sizeor shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) etc complete all as specified and directed. |
| 92 | S & F for Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or M & L for steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed. |
| 93 | S & F for frame work as girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates confirming to Fe-410-W(Gde-E-250) quality-A, etc complete all as specified and directed. |
| 94 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified & directed. |
| 95 | Taking down the existing unserviceable main switches, DBs,bus bar chambers,,VTPN etc of any capacity including all fitting and fixtures such as MCBs,isolatorr etc and removing from site complete all as specified and as directed. |
| 96 | M&L for Point wiring for One light point controlled by one way switch with two runs 1.5 Sq mm copper conductor single core FRLS (ISI Marked) PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC caping and casing of suitable size surface type and all fittings/fixtures such as TEE,Bend,elbow,socket,shadle etc of suitable size ISI marked and PVC terminal boxes of suitable size for mounting the switches/sockets/regulators/ceiling rose etc including running up of 1.5 Sq mm copper conductor FRLS (ISI marked) PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified .(Note-Rate quoted is deemed to include making good the disturbed surface and to match the adjoining surface) |
| 97 | All as per Item No 96.00 above but One ceiling fan /exhaust fan point wiring. |
| 98 | All as per Item No 96.00 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sqmm size. |
| 99 | All as per Item No 96.00 above but One 3 pin socket outlet, 5 Amps, same board, with other switches. |
| 100 | All as per Item No 96.00 above but One 3 pin socket outlet, 5 Amps, independent board, |
| 101 | All as per Item No 96.00 above but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 3/6 pin socket outlet 15 Amps ,on Independent board |
| 102 | S&F switch piano, flush type, single pole one way 6 Amp 1-way,23 Volt AC and connecting up complete all as specified and directed. |
| 103 | S&F Socket outlet multi-plug, 5 pin, 6 Amps flush type universal complete all as specified and directed. |
| 104 | S&F switch socket combination 6 Amp,5 pin,multi plug,flush type AC, complete all as specified and directed. |
| 105 | S&F switch socket combination 6/16 Amp, 2 in 1, 3 pin,multi plug,flush type AC, complete all as specified and directed. |
| 106 | S&F Ceiling Rose,65 x50mm, surface bakelite suitable suitable for 230 Volt AC and connecting up, 3 terminal complete all as specified and directed. |
| 107 | S&F ceiling fan regulator 230 Volt AC, electronic rotary stepped type complete all as specified and directed. |
| 108 | S&F Bell push, flush type, 5 Amp complete all as specified and directed. |
| 109 | S&F bell, AC. 230 volts, single pole complete all as specified and directed. |
| 110 | S&F LED Tube Light Fitting 1 x 20 Watt, 220 Volts, AC decorative box type with driver, holder incl LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 111 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 112 | S&F LED light fitting 1x10 Watt Bulkhead luminaires IP 65 rated with pressure die cast aluminium housing and acrylic diffuser,CCT:WW/NW/CW,CRI>80 Ra with open and short circuit protections as per IS :10322 with all accessories including lamp connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 113 | S&F LED light fitting mirror type with high out put disffuser 2 feet,10 watt,220 V AC,decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 114 | S & F Angle holder,PVC/Polycarbonate type with back plate including LED bulb,15 Watt,B-22 lumen greaten than 900, CCT:WW/NW/CW,CRI>80 Ra over moulded plastic housing,polycarbonate diffuser,4Kv surge protection with over voltage withstand up to 440V(for 10 Minutes) with open and short circuit protection as per IS:1602 complete all as specified and directed. |
| 115 | S & F recess mounted downlighter with PC housing and opal PC diffuser with independent electronic driver of capacity 12 Watts ,240 Volts,50 Hz including ceiling cutout 165mm dia or as per fitting rewuirement. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 116 | S & F recess mounted downlighter with PC housing and opal PC diffuser with independent electronic driver of capacity 12 Watts ,240 Volts,50 Hz including ceiling cutout 165mm dia or as per fitting rewuirement. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 days
Sep 21, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender