Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #57262845

Tender For Certain Electrical / Mechanical Wks At Pocket B At Milstn Gandhidham Under Ge (A) Bhuj.

Issued by Statutory Bodies & Commissions/Committees · Kachchh, Gujarat
Tender Value
20 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
16 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Certain Electrical / Mechanical Wks At Pocket B At Milstn Gandhidham Under Ge (A) Bhuj.

BOQ

Name of Work:- CERTAIN E/M WKS AT POCKET B AT MILSTN GANDHIDHAM UNDER GE (A) BHUJ.
Sl. No. Item Description
1Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed.
2M & L Point wiring for one light/fan point controlled by one modular switch, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC casing & capping with all accessories/ fittings, modular metal /Plastic flush box, modular white cover plate with frame fitted with screws, washers and 1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth and making good disturbed surfaces of walls, panels, floors, etc. to match with the existing surfaces complete all as specified and as directed.
3One light/buzzer point controlled by one; one way switch.
4One fan/exhaust fan point controlled by one, one way switch
5One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.
6One 3 pin socket out let 5 amp point on the (same board) with other switches.
7All as per item No. 2 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board complete all as specified and directed.
8S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.
9Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.
10Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.
11Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.
12Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.
13S&F in replacement modular socket 6 Amps / 16 Amps , 2/3 pin combined 2 module complete all as specified and directed.
14S & F in replacement earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per complete all as specified and directed.
15S&F fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.
16S & fix condenser/capacitor suitable for 230 volts singls phase celling fan 1200mm/1400 sweep of approved make and quilty of capacity 2.5 MFD complete all as specified and directed.
17S&F in replecement bell Multi music type , 240 Volt , Single Pole ISI marked complete all as specified and directed. Make :- ANCHOR
18M&L for repair/replacement to light fittings, Ceiling fan,Exhaust fan,sockets, switches, and bell and in any type and capacity and in any position including replacing unserviceable item or replacing whole fixture, fittings in internal electrification complete all as specified and directed. (Note: provide all Electrical T & P according to site by contractor)
19Supply only LED 20 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed.
20Supply only LED 10 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed.
21Supply only fan regulator electronic, step type, socket non modular suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed.
22Supply only lamp holder PVC / Polycarbonate type suitable for LED lamp fitting complete with LED bulb 9W all as specified and directed.
23Supply only Bell push, flush type piano switch 5 AMP AC 230 Volt single pole complete all as specified and directed.
24Supply only socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit, as per model at site complete all as specified and directed.
25Supply only switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed.
26Supply only switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit as per model at site complete and 4 holes on corner all as specified and directed.
27Supply only switch socket outlet combination, multipurpose, three pin, 5/6 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete and 4 holes on corner all as specified and directed.
28Supply only mutimusic buzzer , ding dong AC 230 Volt single pole complete all as specified and directed.
29Supply and laying Rigid non-metallic PVC conduit but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 25mm dia including drawing cable, wire through PVC conduit complete all as specified and directed.
30Supply and laying Rigid non-metallic PVC flexiable protected corrugated conduit of size 20mm for loose wire near DB including drawing wire through conduit complete all as specified and directed.
31Supply and laying in replacement of PVC casing and caping but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 25mm dia including drawing cable, wire through PVC casing capping complete all as specified and directed.
32Supply only modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.
33Supply only modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.
34Supply only modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.
35Supply only modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.
36Supply only switch socket modular , 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.
37Supply only modular fan regulator 120 W 2 module complete all as specified and directed.
38Supply only ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.
39Supply only 15 Amp ,3 Pin plug top,suitable for 230 V AC supply ,made of high - quality fire-retardant insulating material with brass contacts ,complete with all accessories and connections complete all as specified and directed.
40Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 Volt , 10-60 Amps , accuracy class - I , 50 Hz,conforming to IS 13779,IP - 54 with parameters to show data , time,current reading , load , PF,voltage and KWH complete all specified and directed.
41Supply only LED spot (recessed) Warm white light 12 W round type (3000K) AC 90 - 260 volts including all accessories and fixing arrangement complete all as specified and directed.
42supply and fix in repair plastic Modular surface mounted switch board of 1 module including modular front , back plate and plastic suken box all as specified and directed
43supply and fix in repair plastic Modular surface mounted switch board of 2 module including modular front , back plate and plastic suken box all as specified and directed
44supply and fix in repair plastic Modular surface mounted switch board of 3 module including modular front , back plate and plastic suken box all as specified and directed.
45supply and fix in repair plastic Modular surface mounted switch board of 4 module including modular front , back plate and plastic suken box all as specified and directed.
46supply and fix in repair plastic Modular surface mounted switch board of 6 module including modular front , back plate and plastic suken box all as specified and directed.
47supply and fix in repair plastic Modular surface mounted switch board of 8 module including modular front , back plate and plastic suken box all as specified and directed.
48supply and fix in repair plastic Modular surface mounted switch board of 10 module including modular front , back plate and plastic suken box all as specified and directed.
49Supply and fixing only LED 20 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed.
50Supply and fixing only LED 10 W high quality indoor batten type tube light fitting with PC housing and as well light application CCT 6000 K, electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed.
51Taking down old and unsrevicable sheet metal enclosure , switch fuse unit , SPN & TPN distribution bord any type /way / capacity including fuses,MCB's , insulator etc complete after removing all connection and making good the disturbed surface all as directed.
52S&F sheet metal enclosures for distribution board when MCB to be used V-TPN (Triple pole and neutral) 6 way, 415 Volts, sheet metal powder coated, IP 42 protection with 200 Amps rated bus bar, single door type including MCCB 63 Amp & 16 KA complete all as specified and directed. ( Note : Double Door)
53S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 8 way, 240 Volts, sheet metal powder coated, IP 42 protection with 100 Amps rated bus bar, Double door type complete all as specified and directed.
54S&F sheet metal enclosures for distribution board when MCB to be used SPN ( Single pole and neutral ) 12 way, 240 Volts, sheet metal powder coated, IP 42 protection with 100 Amps rated bus bar, single door type complete all as specified and directed.
55Supply and fixing MCCB-100 Amps (4 Pole) include spreader ,lugs, in `C’ series having current rating 16 KA complete all as specified and directed.
56Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.
57S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed
58Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces supply and fix in repair plastic Modular surface mounted switch board of 1 module including modular front , back plate and plastic suken box all as specified and directed.
59M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessaries with 4sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,supply and fix in repair plastic Modular surface mounted switch board of 1 module including modular front , back plate and plastic suken box all as specified and directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.
60M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,supply and fix in repair plastic Modular surface mounted switch board of 1 module including modular front , back plate and plastic suken box all as specified and directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.
61Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core 0.5 sqmm flexible copper conductor cases of suitable size complete all as specified and directed. (Note : Include warm &natural&cold white as per site requirement)
62Supply and fixing in replacement of LED Bolard new generation ,energy saving, environmental friendly , long life aesthetically designed aluminum landscape for diffused lighting with high power LEDs ,IP65 protection and impact of capacity 20 Watt including suitable PCC foundation complete all as specified and directed.
63Supply & Fixing LED Gate Light outdoor water proof IP55 rated, 40 watt, square type, protected against splashing water, anti corrosion, anti rust, long service life alongwith suitable accessories required as per site for fixing the light on post/ pillar complete all as specified & directed.
64Supply and fixing ceiling fans complete with three blades, down rods, regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 220 CFM with service value 6.00 BEE, five star rated with BLDC and 100 % of Copper Winding supply and fix in repair plastic Modular surface mounted switch board of 1 module including modular front , back plate and plastic suken box all as specified and directed. (Note :Old ceiling Fan to be deposited in MES store yard for repair )
65Supply and fix in replacement of exhaust fan in repair made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep upto 300 MM mm complete all as specified and directed ( Note : Making openings in wall for installation of exhaust fans of various sizes as required at site ,including cutting,finishing ,making good damages and complete all as specified & directed.
66Supply and fixing indoor unit of split type AC 2 TR in replacement of worn out unit Comprises of cooling coil, blower, blower motor, swing motor,swing blade filter, PCB, Thermostate etc complete all as specified and as directed. Make- Voltas/ LG
67Supply and fixing in replacement to worn out door unit of split type AC of cap 2 TR. comprises of condensor, condenser motor, condensor fan and blade , capacitor, suction, discharge valve, outer cover duly powder coated etc complete all as specified and as directed. Make-Voltas/ LG.
68Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.
69Disconnecnting, dismantling and taking out the non functional Air Conditioner window type of any description, any make and in any position 1.5 TR/2.0 TR capacity Single Phase 50 HZ, strip opening, coil of indoor unit and brazing the discharge and suction line by and checking & retightening of all electrical connections. Replacement of minor part such as nut, bolts, screws, washers, fixing properly bracket housing of capacitors, relay incl replacment of unserviceable parts,Cleaning and servicing of Window AC (1.5 Ton/2 Ton ) indoor and outdoor units by using high -pressure water jet ,including cleaning of air filter ,evaporator coil,condenser coil,drain tray ,drain pipe , removal of dust and dirt deposits, taking out and removing unserviceable/defective wiring & parts incl painting the bottom with one coat of black synthetic enamel paint, replacement of unserviceable and defective parts brazing reassembling and testing of the AC complete all as specified and directed.Note :- (i) The replacement of defective/nonfunctional parts shall be measured & paid for seperatly as` supply only' under appropriate item of Schedul A and fixing charges for new items are deemed to be included under this item.(ii) The rate for above items are deemed to include for transpotation of AC to & from workshop as approved by Engr-in-Charge for necessary unserviceable screws/nuts/bolts /washer/packing etc with new one.(iii) Charging of gas if required shall be measured and paid for separatly under appropriate item of schedule A however vacuum and pressure leakage testing with nitrogen (N2) if any required is deemed to be included under the units rate quoted by the contractor for this item.
70Disconnecnting, dismantling and taking out the non functional Air Conditioner Split type of any description, any make and in any position 1.5 TR/2.0 TR capacity Single Phase 50 HZ, strip opening, coil of indoor unit and brazing the discharge and suction line by and checking & retightening of all electrical connections. Replacement of minor part such as nut, bolts, screws, washers, fixing properly bracket housing of capacitors, relay incl replacment of unserviceable parts, Cleaning and servicing of split type AC (1.5 Ton/2 Ton ) indoor and outdoor units by using high -pressure water jet ,including cleaning of air filter ,evaporator coil,condenser coil,drain tray ,drain pipe , removal of dust and dirt deposits, taking out and removing unserviceable/defective wiring & parts incl painting the bottom with one coat of black synthetic enamel paint, replacement of unserviceable and defective parts brazing reassembling and testing of the AC complete all as specified and directed.Note :- (i) The replacement of defective/nonfunctional parts shall be measured & paid for seperatly as` supply only' under appropriate item of Schedul A and fixing charges for new items are deemed to be included under this item.(ii) The rate for above items are deemed to include for transpotation of AC to & from workshop as approved by Engr-in-Charge for necessary unserviceable screws/nuts/bolts /washer/packing etc with new one.(iii) Charging of gas if required shall be measured and paid for separatly under appropriate item of schedule A however vacuum and pressure leakage testing with nitrogen (N2) if any required is deemed to be included under the units rate quoted by the contractor for this item.
71Supply only heavy duty PVC flexible pipe with necessary jubilee clamps for water cooler/split ACs/Window ACs drains of size :-
72(a) 15mm dia bore.
73(b) 20 mm dia bore.
74Supply and fixing of inverter /non inverter type AC (Indoor or outdoor unit )PCB of split type AC Cap 1.5/ 2 TR as per existing make and model. Complete all as specified and directed. (Note : Provide as per AC model number because some AC missing of PCB Board)
75Supply only new coling fan motor for window type AC 1.5TR/2TR, complete all as specified and directed.
76Supply only new cooling fan motor for split type AC of 1.5/2.0 TR capacity, complete all as specified and directed.
77Supply only condenser fan motor complete with necessary mounting bracke to and base frames for :-
78(a) Split /window type AC of any make and capcity 1.5/2 ton.
79(b) Refrigerator of 165 to 310 ltrs capacity.
80Supply only capacitors of the following capactities for ACs water coolers, refrigerators, Deep frizers etc as per site requirement.
81(a) 6 Mfd
82(b) 10 Mfd
83(c ) 36 Mfd
84Supply, installation including brazing, jointing copper tubing superior quality of upto dia 5/8” completes all as specified and as directed.
85Supply and fixing hermetically sealed reciprocating compressor ,1/3 HP to 1/2 HP, suitable for 80/40 litre water cooler ,complete with refrigerant charging ,testing and commissioning all as specified and as directed.
86Supply and fixing hermetically sealed deep freeser compressor upto capacity 500 Ltr (Upto 1 hp) complete with refigerant gas charging ,filter drier replacement ,brazing testing and commissioning suitable for chest/deep freezer operation supply and fix in repair plastic Modular surface mounted switch board of 1 module including modular front , back plate and plastic suken box all as specified and directed.
87M&L, for providing rubber foam heavy duty insulation tube over the existing copper tubing of any length at any location in replacement of worn out insulation including fixing with cable tie, clamping all as required at site, complete all as specified and directed.
88Supply only condenser unit of the following appliances including making of all connectiions as specified and directed by Engr-in-charge following :-
89(a) Window type AC 1.5/2.0 Ton capacity
90(b) Split type AC 1.5/2 Ton capacity.
91(c) Refrigerator of 165 to 310 ltrs capacity.
92M&L for checking for leakages, creating vacuum, charging of Refrigerant gas and cleaning of indoor and outdoor unit of all type of AC with proper water jet as per site reqmt in the unit to the required pressure complete all as specified and directed for the following appliances:- (Note : skilled AC Technician only can do this work )
93(a) Split type & window type AC 1.5/2 Ton capacity
94(b) Refrigerator of 165 to 310 ltrs capacity.
95(c) Deep freezers of Upto 425 ltrs capacity.
96M&L for shifting of split type AC from one location to other location including fixing evaporator unit with gitties/fastner, cutting wall/concrete incl arrangement of T&P for laying copper tubing, positioning condensing unit, laying copper tubing incl brazing work, connecting drain pipe, making good disturbed surface complete all as specified and as directed. (Note- Indoor and outdoor unit complete )
97Supply only PVC tapes are flexible ,Moisure -resistant and commonly used for insulation ,Standard PVC insulation tape (Multi colour) -6 Mtr to 10 mtr (Anchor,Fin0lex,3M,Polycab) Complete all as specified and directed.
98M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point, all as specified and testing on completion all as per directed.
99Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II.(ii) Earthing lead and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.(iii) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (iv) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.
100(1) The contractor shall keep all items readily available at site, which is required for urgent repair works of appliances.
101(2) In case of absence of manpower without providing suitable replacement an amount of Rs 1000/- per day shall be recovered as liquidated damage per person per day from the bill. Please Enable Macros to View BoQ information
102(2) In case of absence of manpower without providing suitable replacement an amount of Rs 1000/- per day shall be recovered as liquidated damage per person per day from the bill. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57262845
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 20 Lakhs
LAST DATE 19-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Certain Electrical / Mechanical Wks At Pocket B At Milstn Gandhidham Under Ge (A) Bhuj.
Basic Detail
Tender No 8535
Bidding Type Tender
Location
City Kachchh
State Gujarat
Key Dates
Publish Date 29 Aug 2026
Submission Date 19 Sep 2026
Open Date 21 Sep 2026
Finance
Tender Value 20 Lakhs
Tender Fee 500
EMD 40000
Exemption Available
Document List
235a7f0e-c46a-4dc1-b984-fe666b5e2870.html
BOQ_881954.xls
LISTOFMAKE.pdf
PS8535.pdf
TENDER8535.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Sep 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

235a7f0e-c46a-4dc1-b984-fe666b5e2870.html

xls

BOQ_881954.xls

pdf

LISTOFMAKE.pdf

pdf

PS8535.pdf

pdf

TENDER8535.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders