Tender For Provn Of Office Shelter With Allied Infra And Provn Of Kote At Transit C (Btc) At Dras Under Ge Kargil.
Tender Value
62.93 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
10 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Office Shelter With Allied Infra And Provn Of Kote At Transit C (Btc) At Dras Under Ge Kargil.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc 15cm deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 3 | Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/ dense soil complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L PCC type D-2 1 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete incl sub base of building complete all as specified and directed by Engr-in-Charge. |
| 5 | M&L PCC type C-2 1 :3 : 6 (40mm graded agg) in foundation, filling and mass concrete incl sub base of building complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for M-30 Grade reinforcement cement concrete (design mix) (using 20mm graded crushed stone aggregate) in foundation, including rafts, footing, foundation beams, plinth beams, bases for coloums etc. complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for M-30 Grade reinforcement cement concrete (design mix) (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge. |
| 8 | M & L for M-30 Grade reinforced cement concrete (design mix) (using 20mm graded stone aggreagate) in beams, cantilevers, bressummers, lintels etc complete all as directed |
| 9 | M & L RCC type A1 (1:1.5:3) using 20mm graded stone aggregate in slabs supported on walls beams & columns in floor roof, landing, complete all as specified (reinforcement to be measured separately) |
| 10 | M&L for reinforcement cement concrete (nominal mix) type A1 (1:1.5:3) (using 20mm graded crushed stone aggregate) in foundation , including rafts, footing, foundation beams, plinth beams, bases for coloums etc.complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L flat rough finished form work to side of concrete foundations, footings, bases of coloumns, raft and raft beam,sides and soffits (if any) of foundation and plinth beams, and similar works etc. complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L flat rough finished form work to side of pillars, posts, struts, piers, columns and stanchions.etc complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L flat rough finished form work to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engr-in-Charge. |
| 14 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work: not exceeding 200 mm thick |
| 15 | M & L for formwork to edges of concrete flats, breaks in floors, opening in concrete walls floors and roofs and sides of RCC/PCC bands in walls horizontal or sloping and similar work complete all as specified. |
| 16 | S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hooping etc and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 17 | All as per item No 11 above but 5mm dia and over upto and incl 10mm dia in strirups, spaces and binder etc. complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for Precast cement concrete Type C1, (1:3:6) (using 20mm graded crushed stone aggregate) block masonary with solid blocks exc 10cm in width and setting in CM 1:4, complete all as specified and directed by Engr-in charge. |
| 19 | M&L for Precast cement concrete Type C1, (1:3:6) (using 20mm graded crushed stone aggregate) block masonary with solid blocks exc 10cm in width and setting in CM 1:6, complete all as specified and directed by Engr-in charge. |
| 20 | M&L 15 mm thick cement plaster on other than fair faces of concrete surface in cement mortar (1:4) finished even and somooth without using extra cement complete all as specified and directed. |
| 21 | M & L rendering 15 mm thick in CM 1:4 on other fair faces of brick work or concrete surfaces in two layers 10mm & 5mm thick with WPC to be used in outer layer of 5mm thick, finishing even and smooth without using extra cement complete all as specified and as directed (WPC measured and paid seperately) |
| 22 | Supply only liquid waterproofing compound |
| 23 | M&L 15 mm thick cement plaster on fair faces of concrete surface in cement mortar (1:6) finished even and somooth without using extra cement complete all as specified and directed. |
| 24 | M&L for two coats of oil bound distemper on newly plastered surfaces of walls over a coat of 1 mm thick wall care putty including preparation of surfaces complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed. |
| 26 | M&L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 28 | Returning, filling in hard / dense soil incl spreading, levlling, watering and well ramming in each layer n.exc 25 cm thick complete all as specified and directed. |
| 29 | Removal of surplus hard / dense soil to a distance not exceeding 50m and deposting where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed. |
| 30 | M&L earth filling in floors or paving including spreding, levelling and ramming with watering as required in layers n.exc 25 cm thick complete all as specified and directed. |
| 31 | M&L for broken stone or boulders as in hardcore of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 32 | M&L for cement concrete type C-2 1:3:6, 75 mm thick as in plinth protection finishing surface even and smooth without using extra cement complete all as specified & directed. |
| 33 | M&L for cement concrete type C-2 1:3:6, 75 mm thick as in sub base in floor complete all as specified & directed. |
| 34 | M&L for cement concrete type C-2 1:3:6, 100 mm thick as in sub base in floor complete all as specified & directed. |
| 35 | M&L 25 mm thick cement concrete 1:2:4 type B-0 as in floor finished even and rough to receive further floor finishes complete all as specified and directed. |
| 36 | M&L for machine cut Kota stone slab flooring 20-25mm thick, over cement screed bed or bedding layer of cement mortar 20 mm thick in CM (1:6) for laying floor finishes base laid and jointed with grey cement slurry mixed pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by engr in charge. |
| 37 | M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tile over 10mm thick rendering in cement mortar 1:4 in backing coat of plaster for including rubbing and mirror polishing complete all as specified and as directed by Engr-in-charge. |
| 38 | M&L Non skid Ceramic coloured tiles 7 to 8mm thick area of each tiles exc 0.06 sqm but not exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm screed bed in CM 1:6 finished even and smooth for receive tiles complete all as specified and directed. |
| 39 | M&L for Glazed ceramic coloured tiles in vertical surfaces 350x450x7mm thick etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tile over 10mm thick rendering in cement mortar 1:4 in backing coat of plaster for skrting/dado complete all as specified and directed. |
| 40 | M&L for 20mm thick granite (of any type) work table rubbed and polished) in steps, pillars, jambs, window cills, cooking plateform/whash basin plateform etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all complete all as specified and directed. |
| 41 | S&F Rolled mild steel Gde Fe-290 (Gde Fe 165) as in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. all as specified and directed. |
| 42 | S&F Rolled mild steel Gde Fe-290 (Gde Fe 165) as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework and staging of water tanks and similar work all as specified and directed. |
| 43 | S&F Rolled mild steel Gde Fe-290(Gde Fe 165) in Plates (plain or chequered) channels,angle sections, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment all as specified and directed. |
| 44 | M&L For Framed work as (Fe-290 Gde E-165) in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete. |
| 45 | S&F Mild steel rag or lewis bolts screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised length of bolt exc 15 cm and not exc 45 cm long and neck diameter 16 mm complete all as specified. |
| 46 | M&L for Supplied and fixed MS screw bolts with hexagonal or square heads at one end and screwed at other ends, each screw end to be fitted with washer and one hexagonal or square nut, exc 5 cm long , dia of neck 5 to 10 mm all as specified and as directed by Engr-in-Charge. |
| 47 | M&L for preparation of newly untreated steel / iron surfaces of any description over 10cm in width or girth not otherwise described and painting two coat of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified |
| 48 | S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class Hard wood complete all as specified. |
| 49 | S&F 35 mm thick 2nd class hard wood plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed. |
| 50 | S&F 30 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers complete all as specified and directed. |
| 51 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 52 | S&F 100mm but hinges medium weight cold rolled mild steel fixed with screws or welded all as directed. |
| 53 | S&F Aluminium alloy, anodized, sliding door bolt with hasp staple (bolt type) & fixing clips of shet, cast or extrucded section & fixing bolts & sliding bolts of extrucded section or cast aluminium alloy & fixed 300mm long. |
| 54 | S&F 150mm long aluminium anodized, barrel tower bolts exturded section & fixed all as specified. |
| 55 | S& F aluminium handles cast type anodised size 150mm complete all as specified. |
| 56 | S&F 75 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed. |
| 57 | S& F 100mm long aluminium anodized, barrel tower bolts exturded section & fixed all as specified. |
| 58 | S& F aluminium handles cast type anodised size 100mm complete all as specified. |
| 59 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 60 | S & F curtain rails anodised aluminium plated with fixing brackets, stops, rollers etc. complete all as specified |
| 61 | S&F figured glass 3mm thickness pin headed type and glazing with oil putty n exc 0.5 Sqm in each pane. |
| 62 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified. |
| 63 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed. |
| 64 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 65 | M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed. |
| 66 | M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed. |
| 67 | M&L for Plain fillets of second class soft wood (KAIL), sectional area not exceeding 3 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed. |
| 68 | S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work complete, all as specified and directed. |
| 69 | S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work complete all as specified and directed. |
| 70 | S&F High grade stainless steel toilet pan of size 58.5x48.2x30.0 cm (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 71 | S&F PVC flushing cistern valveless syphonic action type flushing cistern low level 10 Ltrs, white, with inlet, ball valve, float and handle incl bracket complete all as specified and directed. |
| 72 | S&F vitreous china urinal bowl type complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinals to plug with and incl 60cm long brass screw pointing around urinal back in cement complete all as specified and directed. |
| 73 | S&F vitreous china urinal partition white of size 310x700mm complete all as specifed and as directed |
| 74 | S & F WHB counter sunk type ovel under/over counter shape in fixed & on stone slab incl necessary cutting etc complete all as spcifed and directed. |
| 75 | S&F pillar tap 20 mm bore fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed and fly screwed for iron pipe complete all as specified and directed. |
| 76 | S&F 20 mm dia chromium plated fancy type Bib tap with round handle screwed down screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 77 | S&F 20 mm dia chromium plated fancy type stop valves/angle cock screwed down high pressure, screwed for iron pipe complete all as specified and directed. |
| 78 | S&F PVC connection 15mm size, with PTMT nuts of length 600mm complete all as specified and directed. |
| 79 | S&F 32mm CP waste coupling with waste pipe complete all as specified and directed. |
| 80 | S&F 32mm CP waste coupling with waste pipe but suitable for urinals complete all as specified and directed. |
| 81 | S&F CP urinal spreader complete all as specified and directed. |
| 82 | S&F 600mm x 450mm beveled edge mirror of selected quality, thickness of glass 5mm, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | S&F Towel rail 600 mm long PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats (Min Wt 170 gms) complete all as specified and directed. |
| 84 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75mm complete all as specified and directed. |
| 85 | S&F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed. |
| 86 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed |
| 87 | S&F 110mm PVC (SWR) 'P' trap complete all as specified and directed. |
| 88 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete complete all as specified and directed. |
| 89 | S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed |
| 90 | S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 91 | PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 92 | PVC (SWR) pipes 150 mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 93 | PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 94 | S&F for 20mm outer dia 3-layer PPR polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stablized and antimivrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors complete all as specified and directed. |
| 95 | S&F for 25mm outer dia 3-layer PPR polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stablized and antimivrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors complete all as specified and directed. |
| 96 | S&F rotational moulded polytheline water storage tank 500 Ltrs capacity (cylinderical/vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 97 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of 20mm bore diacomplete all as specified and directed |
| 98 | M & L for coloured chequered cement concrete tiles 300x300x25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM (1:4) complete all as specified & directed. |
| 99 | M&L Cement concrete Type B1 (1:2:4) 20 mm graded aggregate for coping all as specified and directed. |
| 100 | Providing precast cement concrete Type B-1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain frames set in CM1:6 ,all as specified and directed. |
| 101 | Excavating over area not exc 1.50m in depth, for foundation, etc, cum and getting out in hard/dense soil, complete all as specified and as directed. |
| 102 | All as item No 101 above but exc 1.5 Mtr depth in hard/dence soil complete. |
| 103 | M & L for stone masonry walling of random rubble, uncoursed, well bounded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and as directed. |
| 104 | M & L for stone masonry walling of random rubble, uncoursed, well bounded, laid dry in retaining walls, obutments and similar work complete all as specified & directed. |
| 105 | S& F framed brakets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe 290, Gde E-165. |
| 106 | S&F for joists, channel, angle or tee sections fixed independently with out connecting plates Fe 290 Gde-165 complete. |
| 107 | Supply only galvanised Chain link fencing any size or type all as specified and as directed by Engr-in-Charge |
| 108 | Fixing only chain link fencing incl line wires, any mesh, size and type of standards, rail, straing bolts, etc. incl provision of binding wire. |
| 109 | S&F for galvanised 2 strand , steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolt, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) |
| 110 | S&F for GI Rozor concertina coil with punched tape of 610mm dia, having 50 Nos spirals per 6 mtr length, weight approx 8kg(+ or - 5%) expandable 6 mtrs,consisting of 2.6mm dia heavy high tensile strength of 165kg/sq.m spring steel wire as per IS-4454, Barb (Barb length 24 + or -1 mm, pitch between two barbs 35+ or -1mm) made of 0.5mm thick low carbon heavy galvanised cold rolled steel sheet as per IS-513, heavy duty steel clip as per IS-2062 and Epoxyresin coating for anti-corrosion etc. |
| 111 | S&F for flat iron fillets for securing of wire mesh etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and as directed by Engr-in-Charge. |
| 112 | M&L for Holes Drilled upto 12mm dia and exc 3mm but n.exc 12mm depth of holes all as specified and as directed by Engr-in-Charge. |
| 113 | M&L for round bar 10 mm dia and over , for support in the chain link fencing, in available lengths complete all as specified and directed. |
| 114 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch. |
| 115 | All as per Srl item No 114 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board. |
| 116 | All as per Srl item No 114 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board. |
| 117 | S & F Switch piano flush type 5 Amps, single pole one way complete all as specified and directed. |
| 118 | S & F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed. |
| 119 | S & F Switch socket combination 2 in 1,3 pin, 5 and 15 Amps flush type complete all as specified and directed. |
| 120 | S & F Ceiling rose on PVC Square Block surface bakelite 65x50mm, two to three terminals complete all as specified and directed. |
| 121 | Supply and fixing LED white colour 1x18 Watt, 220 V, AC, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use, connecting up with two/three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 122 | S&F Lamp holder, PVC/Polycarbonate type on square block with back plate suitable for batten fittings complete all as specified and directed. |
| 123 | Supply and fixing LED bulb 09 watt, 230 volts complete all as specified and directed complete all as specified and directed. |
| 124 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 125 | S & F Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. |
| 126 | S & F Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 04 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed. |
| 127 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning. |
| 128 | Supply and fixing 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning. |
| 129 | S & Fix LED Flood light fitting 70 watt 5000 k green/natural white, IP>66 , grey powder coated die cast aluminium housing, inbuilt energy efficient surge protected electronic driver, with all connected accessories all as specified and directed . |
| 130 | Supply and fixing exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers complete with cutting of suitable size of hole on wall with all connected accessories and making surface good after fixing. |
| 131 | Supply and fixing LED luminarie 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 132 | M&L for Earthing complete with galvanised steel earth plate electrode of size 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI iron wire of size 4 mm dia by means of GI bolts, nuts, check nuts and washers, protected by 15mm bore GI light grade ISI marked pipe upto and including test points. Earth plate shall be surrounded by alternate layer 15cm thick of charcoal or coke and common salt all around bottom and top , 20cm bore GI medium grade ISI marked pipe for watering and including funnel,wire mesh,PCC chamber pit made with PCC(1:3:6) type C-1(using 20mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50M, CI pit cover duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No.3 of SSR 2009(Part-I) and all as directed.Note:- (i) Protection pipe and earthing strip upto test point from top of the earth plate and further upto the body of electrical equipment shall be included in the unit rate of this item.(ii) Earth testing arrangement should be done by contractor as per direction of Engr-In-Charge. |
| 133 | M & L LT UG cable 2 core x 16 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete at site all as specified and as directed. |
| 134 | M & L LT UG cable 2 core x 10 sq mm 1100 Volts grade XLPE insulated , armored, heavy duty with aluminium conductor laid in trenches or fixed to walls/ poles or passing through pipes with and including,cable gland lugs/ thimbles/ ferrules including connecting, testing and commissioning complete at site all as specified and as directed.Notes for item No 133-134:(a) Excavation,RFR and protection pipe etc. Shall be measured and paid separately under relevant item of schedule |
| 135 | M& L for boring of holes under road pavment/hard standing by manual boring including making good to the distrubed surfaces complete all as specified and directed |
| 136 | Supply and laying double wall corrugated HDPE (DWC) pipe of size OD 40 mm, pressure rating SN-8, in trenches for protection of cable complete all as specified and directed. |
| 137 | Supply and Fix GI tubing light grade 40 mm bore as in cable protection fixed to poles/walls or laid in trenches/under road crossing etc. all as specified and as directed. |
| 138 | M & L for earthing complete with GI earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level, connected to and including GI strip of size 32x6 mm flat by means of SS bolts, nuts, and washers, protected by 40mm bore GI medium grade ISI marked pipe upto test point. Earthing plate shall be surrounded by alternate layers 15cm thick of charcoal or coke and common salt all around bottom and top, 20mm dia GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) including necessary form work, excavation and earth work in any type of soil, returning filling in and disposal of surplus soil to a distance not exceeding 50 M, pit cover 40 mm thick made with RCC (1:2:4) type B-1 (using 20mm graded crushed store aggrgate) including TMT reinforcement 80 mm dia @ 75 mm C/C both way, MS handle of 12 mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as shown in electrical plate No-3 of SSR Part-I and all as directed. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and earthing strip upto test point from top of the earth plate and further upto body of electrical equipment shall be including in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engr-in-charge. No extra payment shall be made on this account.(iv) Earth continuity conductor (GI strip) should be laid on DMC insulators of required quantities for whole length. |
| 139 | M&L Aluminium strip 25X3.15mm earth continuity conductor or main earthing lead with saddle and fixing screws etc for roof conductors and down conductors upto test point and further connected to ground conductor fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and directed by Engineer-in-Charge. Note- Earth continuity conductor (Aluminium strip) should be laid on DMC insulators of required quantities for whole length. |
| 140 | M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 4 Nos 8mm dia 25mm long hexagonal head screws, fixed on wall surface, making connections of down earth conductors and earthing strips all as specifed and directed. Please Enable Macros to View BoQ information |
| 141 | M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 4 Nos 8mm dia 25mm long hexagonal head screws, fixed on wall surface, making connections of down earth conductors and earthing strips all as specifed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender