Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #57262632

Tender For Repair / Replacement Of Internal Elect Wiring, Db, Sub Main Wiring, And Connected Items Md Accn Of Darjipura Afs Vadodara.

Issued by Statutory Bodies & Commissions/Committees · Vadodara, Gujarat
Tender Value
30 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair / Replacement Of Internal Elect Wiring, Db, Sub Main Wiring, And Connected Items Md Accn Of Darjipura Afs Vadodara.

BOQ

Name of Work:- REPAIR / REPLACEMENT OF INTERNAL ELECT WIRING, DB, SUB MAIN WIRING, AND CONNECTED ITEMS MD ACCN OF DARJIPURA AFS VADODARA.
Sl. No. Item Description
1Attending the complaints lodged by the occupants/users of electrification nature & rectification of the fault as per the complaint lodged etc by the user in any time (day and Night) in respect of main fixture /breakdown for light/fan/bell/light or power socket and LT line etc complete repairs to the extent by removing connections from the system removing faults in wires, battens, conduit, sunken boxes, junction boxes, main switches, MCBs/DBs utility light fitting, lamp holders AC ceiling/ Exhaust fans and other type of complaints to connected fixtures of the internal electrification including providing of petty stores such as wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tape, screws , nuts as required to rectified the fault with regard to the complaint lodged and refixing of fittings, fixtures to their position as dismantled and respect of item if required to be paid under respective item as required complete all as directed at site to the entire satisfaction of Engr-in-Charge/users. Note :- (a) Repair of switches, fan, regulator , replacing burnt/ damaged wiring , replacement of burnt MCBs and main switch , voltage fluctuation, current leakage, repair of street lights, and replacement of tube lights and no light etc will be attended with in 8 Hrs as urgent nature.Cost of taking out U/s Accessories is deemed to be included but S/F of new accessories will be measured and paid saperatly under Item item 2 to 57.(b) Petty item such as insulation tap, small wire pieces, screw etc is deemed to be included with unit rate of item(b) The complaints will be attended by electricians & respective helpers during day and night hours without delay, if any delay in emergency complain panalty will be double from complain rate.
2(c) The complaint will be taken from complaint cell.(d) All necessary tools & plants i.e. multimeter, tong tester, spanner set, wrench, screw driver set, combination plier, testing lamp set, drilling machine, bamboo ladder, blower/ vaccum cleaner, crimping tool, cutting and chasing tool, insulation megger , etc will have to kept by each tradesman engaged by contractor at his own cost.(e) Any accident/ mishappening occurred during the execution of work shall be responsibility of Contractor. (f) One MOBILE PHONE should also be provided by contractor to the each trademan engaged by him with incoming & out going facilities for normal and after working hours also so as to contact him in case of emergency during the entire period covered under the contract to keep liaison / communication with MES staff . (g) Complaint register and complaint slip shall be providing by the contractor duly printed with CA No and firm and the cost is deemed to be included in unit rate.(iii) Item Sl no 1 is Labour only for Nature of complaint like no light,loose connection, burnt wire repair, shifting fitting/fixture, providing labour for temporary arrengement for light/fan, phase balancing by sharing load are cover under the above complaint any type etc. (i) Attending complaint like supply and fixing of switches, sockets, regulators, ceiling rose,bell push, lamp holder, sunken box, PVC plate laying of wire,LED batten any size,T-08 fittings,LED 2x2 recess mounting lights, fan blade, ex fan louvers,pvc EX fan, PVC conduit all in any type etc under serial item No 02.00 to 57 are executed on day to day maint work. For item serial item No 02 to 57 contractor shall also provide tradesmen on daily basis .
3Supply and fixing piano switch flush type 5 Amps single pole, one way, 230 volts AC circuit complete all as specified & directed.
4Supply and fixing bell push, 6 Amps, flush type, 230/250 Volts, 50 Hz supply complete all as specified and directed.
5Supply and fixing piano switch flush type 15 Amps single pole, one way 230 volts AC circuit complete all as specified and directed.
6Supply and fixing socket out let 2 in 1, 3 pin 5 Amps flush type, 230 volts Ac circuit complete all as specified and directed.
7Supply and fixing switch socket combination 2 in 1, 3 pin 5 Amps flush type, 230 volts Ac circuit complete all as specified and directed.
8Supply and fixing switch socket combination out let 2 in 1, 3 pin 15 Amps flush type, 230 volts Ac circuit complete all as specified and directed.
9Supply and fixing switch socket combination with junction box 2 in 1, 3 pin 5 Amps flush type, 230 volts Ac circuit complete all as specified and directed.
10Supply and fixing switch socket combination with junction box 2 in 1, 3 pin 15 Amps flush type, 230 volts Ac circuit complete all as specified and directed.
11Supply and fixing socket out let 2 in 1 multipurpose three pin, 15 Amps & three pin 5 Amps controlled by one switch, flush type 230 volts AC circuit complete all as specified & directed.
12Supply and fixing ceiling rose PVC polycarbonate isolated body 63.5x20 mm three terminal complete all as specified and directed.
13Supply and fixing lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
14Supply and fixing 5 Amp plug top complete all as specified and directed.
15Supply and fixing 15 Amp plug top complete all as specified and directed.
16Supply and fixing indoor decorative channel housing fitting slim LED batten 10 Watt (Mirror Light) 2 Feet with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same with two Nos PVC square box complete all as per specified and directed.
17Supply and fixing LED Tubelight fitting with ENERGY Efficient 20 Watt bright light complete all as specified and directed.
18Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
19Supply and fixing LED security light luminaire 25 watt freedom , pressure die cast aluminum housing, heat resistant glass, IP66 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed.
20Supply and fixing modular switch one way 6 Amps 1 module 240 Volts complete all as specified and directed.
21Supply and fixing modular switch one way 16 Amps 1 module 240 Volts complete all as specified and directed.
22Supply and fixing modular switch two way 6 Amps 1 module 240 Volts complete all as specified and directed.
23Supply and fixing modular bell push way 6 Amps 1 module 240 Volts complete all as specified and directed.
24Supply and fixing modular socket outlet 6A 3 pin 2 module 240 Volts complete all as specified and directed.
25Supply and fixing modular socket outlet 6A/16A, 5 pin 2 module 240 Volts complete all as specified and directed.
26Supply and fixing modular fan regulator 120 W 2 MODULE 240 Volts complete all as specified and directed.
27Supply and fixing Fan Regulator 240 Volts complete all as specified and directed.
28Supply and fixing LED bulb 9 Watt 5 star rating complete all as specified and directed.
29Supply and fixing door bell ding dong, multi tune, Chime and Buzzer complete all as specified and directed.
30Supply and fixing capacitor of capacity 2.5 Mfd (PVC body) complete all as specified and directed.
31Supply and fixing sheet metal enclosure SP with two pin and socket with one single pole MCB 32 Amps 'C Curve 240 Volts complete all as specified and directed.
32Supply and fixing metal socket 20 A 2 pole + earth 240 volt complete all as specified and directed.
33Supply and fixing metal plug 20 A 2 pole + earth 240 volt complete all as specified and directed.
34Supply and fixing MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting including one MCCB 100 A 4P 25 KA as incommer complete all as specified. Notes : (i) Rate of MCCB 4P/TPN shall be deemed to be included in item rate no extra payment to be measured and paid seperately under appropriate items of this schedule .MCB SP/TP shall be measured and paid saperatly. (ii) Copper thimble shall be used for connection of cable .
35Supply and fixing MCB DB 4 way sheet metal enclosure TPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. Note : Copper thimble shall be used for connection of cable .
36Supply and fixing MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. Note : Copper thimble shall be used for connection of cable .
37Supply and fixing MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed. Note : Copper thimble shall be used for connection of cable .
38Supply and fixing MCB, single pole 240 volts 6 to 32 Amps capacity C series fixed in DB's complete all as specified and directed.
39Supply and fixing MCB single pole and neutral link 240 volts 40 to 63 Amps capacity C series fixed in DB's complete all as specified and directed.
40Supply and fixing MCB, single pole 240 volts 40 to 63 Amps capacity C series fixed in DB's complete all as specified and directed.
41Supply and fixing MCB, four pole 415 volts 63 Amps capacity C series fixed in DB's complete all as specified and directed.
42Supply and fixing FRLSH PVC insulated,unsheathed,single core,flexible copper conductor wire suitable upto voltage grade 1100 volt of different colours and following sizes complete all as specified and directed:-
431.5 Sqmm
442.5 Sqmm
454.0 Sqmm
46Supply and fixing PVC casing Caping 25 mm complete all as specified and directed
47Supply and fixing Rigid non-metallic PVC conduit 20 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc complete all as specified and directed.
48Supply and fixing in repair sunken box 2 module along with moduler cover plate, including taking out old box any type from existing wall and making good as existing complete all as specifed and directed.
49Supply and fixing in repair sunken box 4 module along with moduler cover plate, including taking out old box any type from existing wall and making good as existing complete all as specifed and directed.
50Supply and fixing in repair sunken box 6 module along with moduler cover plate, including taking out old box any type from existing wall and making good as existing complete all as specifed and directed.
51Supply and fixing in repair sunken box 8 module along with moduler cover plate, including taking out old box any type from existing wall and making good as existing complete all as specifed and directed.
52Supply and fixing PVC sheet 3 mm thick with Brass screw and washers with necessary slots reqired for mounting the fixtures complete of the following sizes fixed in repairs complete all as specified and directed.
53Supply and fixing PVC exhaust fan 200 mm sweep complete all as specified and directed
54Supply and fixing PVC exhaust fan 250 mm sweep complete all as specified and directed
55Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed.
56M & L for point wiring with copper conductor cable multistrand, PVC sheathed 2 x 1.5 Sqmm size for one light point or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in and including PVC casing and capping/PVC Conduit of approved size and quality ISI marked, including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading \\"Point wiring'\\".fixed on walls/ceiling including MS sunken or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover inclding arrangements for modular /regular fittings acessories for the following complete all as specified and directed:-
57One light point controlled by one one/way switch.
58One Fan point controlled by one one/way switch and regulator.
59One 3 pin 5 Amps socket outlet on same board with other switch.
60One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size.
61One bell point controlled by one way switch
62All as per item No 59 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 2.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in and including PVC casing and capping of appropriate size and best quality ISI marked, including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading \\"Point wiring\\" fixed on wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.
63All as per item No.59 above but wiring with 4 sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board.
64M & L for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Casing Caping/PVC Conduit or in existing concealed conduit(as required & directed by Engr-in-Charge)accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed including taking down existing sub main wiring complete all as specified and directed.
65All as above item No.70 but using 4 Sqmm cable for phase and neutral and 4 Sqmm for earth wire.Note for Item No. 70 & 71Two run of main wire, one run of earth wire and one run of conduit/ casing caping shall be measured as one unit
66M & L for point wiring in existing concealed conduit complete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code drawing in existing conduit complete, with repalcement of sunken in pressed steel terminal boxes of available size with providing modular top cover plate with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit inclding arrangements for modular /regular fittings acessories for the following complete all as specified and directed:- Please Enable Macros to View BoQ information
67M & L for point wiring in existing concealed conduit complete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade, conforming IS 694 & color code drawing in existing conduit complete, with repalcement of sunken in pressed steel terminal boxes of available size with providing modular top cover plate with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit inclding arrangements for modular /regular fittings acessories for the following complete all as specified and directed:- Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57262632
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 30 Lakhs
LAST DATE 21-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair / Replacement Of Internal Elect Wiring, Db, Sub Main Wiring, And Connected Items Md Accn Of Darjipura Afs Vadodara.
Basic Detail
Tender No 8220/E8
Bidding Type Tender
Location
City Vadodara
State Gujarat
Key Dates
Publish Date 29 Aug 2026
Submission Date 21 Sep 2026
Open Date 23 Sep 2026
Finance
Tender Value 30 Lakhs
Tender Fee 500
EMD 60000
Exemption Available
Document List
2b43baa3-4a29-4fc1-a162-b2bded649be4.html
8220PS.pdf
BOQ_881968.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Sep 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
html

2b43baa3-4a29-4fc1-a162-b2bded649be4.html

pdf

8220PS.pdf

xls

BOQ_881968.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders