Tender For Misc Repair To Gates, Chain Link Fencing, Plain Cement Concrete Flooring And Hard Standing And Connected Work In Md Accn In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
Tender Value
49 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Repair To Gates, Chain Link Fencing, Plain Cement Concrete Flooring And Hard Standing And Connected Work In Md Accn In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete unreinforced in Ground floor & paving not exc 15cm thickness and removal of debris from site all as specified and directed |
| 2 | M&L Cement concreat type D2 (1:4:8) using 40mm graded stone aggregate 100 mm thick as in sub base of path etc finished surface even and smooth w/o using extra cement as specified and directed. |
| 3 | M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 15 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed. |
| 4 | M&L for Cement concrete 1:5:10 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing with interlocking paver blocks. |
| 5 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 6 | M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade |
| 7 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade |
| 8 | M&L for PCC in 1:2:4 type B1 (using 40 mm graded aggregate) 100 mm thick as in hardstanding (The PCC will be laid with 12mm expansion Gap and the gap will be filled up with bituminous joint filler type A) complete all as specified and directed. |
| 9 | M/L cement concrete in 1:3:6 Type C1(20mm graded stone aggtts)as in filling in lintels upto 1.5M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing course, parapets and railings uppto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in , water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 10 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. Make : Neco/ Raj/ SKR/ KK |
| 11 | M & L factory made pre cast cement concrete covers of M-25 grade cement concrete of size as directed by engr - in charge jointed with cement mortar 1:3 (1 cement: 3 coarse sand), wherever required and all as specified. Make : Neco/ Raj/ SKR/ KK |
| 12 | M & L in repairs Reinforced concrete pipes, class NP2, of bore 300 mm dia laid and jointed complete with collars and all as specified and as directed. |
| 13 | M&L for preparation of new or previously untreated concrete/cement surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer. |
| 14 | Dismantaling posts/struts (wood/steel or R.C.C.) any section including taking out embeded portion and making good disturbed ground and dismanteling of PCC in base fdn all as directed by Engr-in-Charge. |
| 15 | Dismantaling posts/struts (wood/steel or R.C.C.) any section including taking out embeded portion and making good disturbed ground in natural ground base fdn all as directed by Engr-in-Charge. |
| 16 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 17 | Dismantling fencing wire mesh, barbed wire any type as directed by Engineer-in-Charge. |
| 18 | Excavating in any type of soil in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface, complete all as specified and as directed. |
| 19 | S&F Mild Steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165. |
| 20 | M&L for PCC type B-2(1:2:4) (40mm graded stone aggtts) as in mass filiing to posts of fences foundation etc all as directed by Engr-in-Charge. |
| 21 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured. |
| 22 | S&f Mild steel round bars 10mm dia and over, cut to length, bent to shape required, for securing chain link fencing including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (Fe-410W GdeE-250). |
| 23 | Supply only Chain link MS galvanisd fencing, not exceeding 4 kg per sqm any size or type complete all as specified and directed. |
| 24 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as directed. |
| 25 | Supply, laying and fixing of galvanised punched tape concertina coil of 600mm diameter of each round/roll, complete having glavanised spring steel core wire 2.5mm dia cold drawn steel, galvanised, punched of low carbon steel having series of sharp barbs uniformly punched alongwith its length 550 Nos, barbs on periphery per revolution, crimped on steel spring core wire (stretchable length 12 meter Appx) weight 7.00 kg of each coil all as complete,incl dismantling of existing coil of any type all as specified and directed by Engr-in-Charge. |
| 26 | Demolition of brick work or stone masonry built in cement mortar all as specified and directed. |
| 27 | M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exe 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 28 | Taking down cement plaster of any description in any position incl racking out joints making for key, scrubbing down with water etc and removal of debris from site all as specified and directed. |
| 29 | M & L for rendering 15mm thick in cement mortar 1:4 on stone walls or other than fair faces of brick walls fiinished even and smooth without using extra cement complete all as specified. |
| 30 | M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of complete all as specified and directed. |
| 31 | M&L Preparation of old plastered surfaces of walls with complete removal existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 32 | M&L Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc of Gde Fe-290, complete, drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed. |
| 33 | S & F MS frame work as in grills gratings, with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars and similar works confirming to Fe290 E-165, etc.all as specified and directed |
| 34 | Dismantling AC Sheets/CGI Sheets corrugated in roof coverings including ridges all as specified and directed |
| 35 | S & F Pre painted coloured galvalume aluminium Zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering / Cladding to wall, fixed with self tapping screws as specified. |
| 36 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges, hips, valley gutters & fixed with self tapping screws as specified. |
| 37 | Dismantling timber scantaling 40 sqcm and over in section in any position. |
| 38 | Dismantling structural steel work including welded fabricks frames, gates, framed truss etc. |
| 39 | M&L Mild Steel rolled sections as in main and cross beams/columns, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates.(Fe-410 W Gde E-250 Quality A), complete all as specified and as directed. |
| 40 | M&L for plain cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in Cement concrete in surface channels and drains complete all as specified and as directed. |
| 41 | M&L for Hardcore of gauge of broken bricks not exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 42 | M&L for 18-20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 10 mm thick back coat in CM (1:4) complete all as specified and as directed. |
| 43 | BLANK |
| 44 | BLANK |
| 45 | S&F of RCC Precast Concrete Post (M-30) of size 150mm X 150mm X 2435mm height having two grooves of size 50 X 30mm, so as to receive 6 Nos. including Provn of 6 Nos of Precast concrete RCC Panels between Two post of size 1500mm X 300mm X 40mm thickness The post is reinforced with 4 Nos. 8mm dia Tor Bars with 4mm dia stir-ups @ 1.615m centre to centre150mm c/c; Panels are reinforced with 3 Nos. longitudinal bar of 8mm dia Tor steel & 6mm plain M.S Stir ups @ 150mm c/c. Manufactured by M-30 graded of concretes and including dismantling of old complete all as specifed and as directed. Note :- (a) Above ground level height will be measured for payment purpose. (b) Excavation of post holes for fixing of Columns shall be measured and paid seprately (c) The post may be fixed to the ground by digging a hole of 500 x500 x600mm and filled with 1:3:6 concrete after the post has been aligned in these holes. The post will be erected @ 1.615 m center to center. Make- Kreative concrete company or equivalent as approved by GE. |
| 46 | M&L for providing precast cement concrete louvers and jallies, 35 mm thick type B- 0, 1:2:4 using 12.5mm graded stone aggregate (measured solid) including all moulding and necessary form work and set in cement mortar 1:4 fixed in repairs complete all as specifed and as directed. |
| 47 | S&F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed. |
| 48 | Demolition and breaking up old unserviceable salt glazed stone ware pipe 150mm bore at any depth set in cement morter incl PCC bed complete all as specified and directed. |
| 49 | Description all as per ser item No 46.00 above but 200mm dia. |
| 50 | M&L for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates) bedding for sewage lines of 150mm bore incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 51 | Description all as per ser item No 48.00 above but for bed of sewage line of 200mm bore. |
| 52 | Supply and fixed class SN-8, dia of pipe 150mm & thickness of pipe as specified in IS 16098 (Part-2):2013, clause 6.3.1 table no 5 structured wall polythelene piping system (pipe with online/offline coupler and elastomeric sealing ring) with non smooth external anular corrugated and smooth internal surface (double wall) for non pressure underground sewerage & drainage application polythylene piping fitted with help of coupler attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering the same into the trench, laying at prescribed gradient, depth and alignment, testing the water tightness of the joint, ensuring the continuity tests of the specified pipe segments etc including all necessary fittings (cost of fittings, rubber rings, gaskets etc includded) complete all as specified and directed by Engineer-in-charge. |
| 53 | Description all as per ser item No 50.00 above but 200 mm dia |
| 54 | Excavation in trenches not exc 1.5m wide and not exceeding 1.5 mtr in depth for foundation etc shaft, cesspits, manholes sewage line etc not exc. 10 Sqm on plan and getting out complete all as specified and directed. |
| 55 | Description all as per ser item No 52.00 above have in before but depth exceeding 1.5mts and not exc 3mtr all as specified and directed. |
| 56 | Returning, filling in, trenches with soil in layers not exc 25 cm thick, watering and well ramming complete all as specified and directed. |
| 57 | Removal of surplus soil to a distance not exc 50 mtr away & deposting where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 58 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender