Tender For Upgradation Of Community Hall At Village Channi Pyt Kartholi Upper, Block Bari Brahmana Under The Scheme Capex (Ddc) For The Year 2026-27
Tender Value
22.55 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
7 days left
EMD
45100
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Samba → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Community Hall At Village Channi Pyt Kartholi Upper, Block Bari Brahmana Under The Scheme Capex (Ddc) For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Excavation in foundation trenches including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil 1m from cutting edge. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Stone Filling @ 20% |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spirals tair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Centring and shuttering including strutting, propping etc and removal of the formwork for foundation |
| 8 | Centring and shuttering including strutting, propping etc and removal of the formwork for soffit |
| 9 | Reinforcement for RCC work including straightening, cutting, bending, placiing in position and binding all complete |
| 10 | Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compactedearth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction ofEngineer -in - charge. |
| 11 | Brick work with FPS bricks of class designation 75 in foundation and plinth in 1 cement: 6 fine sand mortar |
| 12 | Extra for brick work in superstructure above plinth level upto floor V level. |
| 13 | 12mm thick cement plaster of 1cement:6 fine sand mix: Sarpanch room, Pantry, Secy room, meeting hall, computer room, corridor, toilet, ver./entrance, deductions, Toilet D, Window W |
| 14 | 15 mm thick cement plaster of 1 cement: 6 fine sand mix: Externally, Window W, V |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm |
| 16 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 15 mm nominal outer dia pipes. |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): sal wood |
| 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 30 mm thick second class deodar wood |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze |
| 23 | Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed plain partical board flat pressed 3 layers or graded wood particle board medium density |
| 24 | Providing and fixing glazed shutters using 4mm thk float glass |
| 25 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacture (two or more coats) and of required shade and colour on new work. |
| 26 | Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade on new work (two or more coats) |
| 27 | Making plinth protection 50 mm thick of c.conc. 1 cement: 3 coarse sand: 6 graded crushed agg. 20 mm nominal size over bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 29 | Providing and fixing short nose bib cock of approved quality 15 mm nominal bore |
| 30 | Fixing and supplying of electric motor (to be paid as per actual) |
| 31 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 110 mm diameter |
| 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete |
| 33 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 34 | Structural Steel work welded in built up sections,Trusses and framed work incl. Cutting, hoisting, fixing in position & applying a priming coat of approved steel primier all complete. Gate |
| 35 | Carriage of material Sand (10 km) |
| 36 | Carriage of material Bajri (10 km) |
| 37 | Carriage of material Brick (10 km) |
| 38 | CIB with granite plate etc complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender