Tender For Resurfacing And Repairs To Road And Road Furniture At Darjipura At Afs Baroda
Tender Value
90 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
26 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Resurfacing And Repairs To Road And Road Furniture At Darjipura At Afs Baroda
BOQ
| Sl. No. | Item Description |
| 1 | Repair to potholes any depth not exc 1 sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat (VG-10)@ 5 Kg/10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg/10Sqm , blinding with 0.09cum of stone chippings, 6.3mm size and again well rammed ( including supply of premix macadam, binder and chippings). Depth of port holes n exc. 30mm complete all as specified and directed. |
| 2 | M&L Preparation of existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and directed. |
| 3 | M&L for applying evenly a primin/tack coat with bituminous primer using paving bitumen (VG-10) at the rate 5 kg per 10 Sqm, complete all a sspecified and directed |
| 4 | M&L for laying and spreading 30mm thick (consolidated thickness) Premix Bituminous semi dense asphaltic concrete (SDAC) as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of grade VG-30) by weight of total mix including heating the bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mix plant with an electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers, laying & spreading uniformly by means of hydrostatic paver finisher, and rolling and cosolidation to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory, and tandem power roller, complete in all respects as per Clause 507 MoRTH (5th Rev) specification and all as specified and as directed. Note :-(i) Paving bitumen of Grade VG-30 for SDAC shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P labour etc. required for providing and laying bituminous concrete (SDAC) including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item.(iii) Computerized print out of data of bituminous concrete in automatic and temperature controlled hot mixing plant shall be provided to the GE by contractor. AGE (C) shall be ensure the same before payment of any RAR/ Final Bill and kept in records duly signed by contractor/Engr-in-Charge.(iv) The contractor shall quotes the rate against item considering 5.5% VG-30 bitumen content. Job Mix Formula as per Clause No 505.3.3 of MoRTH (5th Rev) for BC shall be worked out from CPRI / IIT, SEMT wing or NIT or Govt Engineering College for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Department and the same be submitted to the Accepting Officer for approval. Any variation in binder content Minus side shall be adjusted @ 50/Kg of binder and no adjustment shall be made on Plus side Please Enable Macros to View BoQ information |
| 5 | M&L for laying and spreading 30mm thick (consolidated thickness) Premix Bituminous semi dense asphaltic concrete (SDAC) as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of grade VG-30) by weight of total mix including heating the bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mix plant with an electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers, laying & spreading uniformly by means of hydrostatic paver finisher, and rolling and cosolidation to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory, and tandem power roller, complete in all respects as per Clause 507 MoRTH (5th Rev) specification and all as specified and as directed. Note :-(i) Paving bitumen of Grade VG-30 for SDAC shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P labour etc. required for providing and laying bituminous concrete (SDAC) including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item.(iii) Computerized print out of data of bituminous concrete in automatic and temperature controlled hot mixing plant shall be provided to the GE by contractor. AGE (C) shall be ensure the same before payment of any RAR/ Final Bill and kept in records duly signed by contractor/Engr-in-Charge.(iv) The contractor shall quotes the rate against item considering 5.5% VG-30 bitumen content. Job Mix Formula as per Clause No 505.3.3 of MoRTH (5th Rev) for BC shall be worked out from CPRI / IIT, SEMT wing or NIT or Govt Engineering College for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Department and the same be submitted to the Accepting Officer for approval. Any variation in binder content Minus side shall be adjusted @ 50/Kg of binder and no adjustment shall be made on Plus side Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender