Tender For Repair Cleaning And Replacement Of Sewage Line, Drainage Work And Soak Well Of Md Accn And Otm At Pcda Under Ge (Af) Jammu
Tender Value
42.92 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
17 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Cleaning And Replacement Of Sewage Line, Drainage Work And Soak Well Of Md Accn And Otm At Pcda Under Ge (Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning manually of blocked WC seat trap, inside house and gully trap it includes remove/refixing of grating and cleaning of WC's trap,kitchen/bath traps any type/pattern (pedestal/squatt pattern) upto 1st manhole and making the drain pipe of any size full functional by flushing with water to entire satisfaction of Engr-in-Charge including cleaning of 1st manhole and removing the waste material/sludge etc toout side form defence land and burring the same in pitscomplete all as specified and directed by Engineer in charge..(Measurement will be carried out each time depend on blockage) |
| 2 | Cleaning of underground SGSW CI pipes vertically horizontally of dia n exc. 200mm by rodding from manhole to manhole or manhole to septic tank/well including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material/sludge to a distance of n. exc 50m and burrying the same pit and replacing manhole cover in position after cleaning (measurement will be carried out each time depend on blockage) complete all as specified and directed by Engr-In-Charge. |
| 3 | Cleaning and dewatering of septic tanks/pits of any depth incl let and outlet chamber and removing slauge (in solid and semi solid), silt, both organic and in-organic nature including any type of waste matterial after plugging of incomimg sewage line and removing waste material / sludge etc to out side form defence land and burrying the same in pit complete all as specified and directed by Engr-In-Charge. |
| 4 | Removing of Sludge, mud from sewage sumpwell, manhole ,sokpit, sokage well of any depth incl let and outlet chamber (in solid and semi solid), silt, both organic and in-organic nature including any type of waste matterial/sludge with Mechaniclly or manual which are required on ground without any other financial effect etc to a distance n. exc 100m and burrying the same in pit complete all as specified and directed by Engr-In-Charge. |
| 5 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. complete all as specified and directed by Engr-In-Charge. |
| 6 | Demolition un-reinforced cement concrete in ground floor or any position and paving any surface and removal of material from station ,complete all as specified and directed by Engr-In-Charge. |
| 7 | Demolition reinforced cement concrete at any position of any depth complete all as specified and directed.Note: Demolition of RCC works any depth any postion shall be included. |
| 8 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegetation upto and including roots upto 30mtrs height form ground and removal of old material from site complete all as specified and directed by Engineer in charge.Note: This included any thick of plaster and already of tiles or mosaic tiles etc. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F in repairs GI tubing 15 mm bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by Engineer in charge. |
| 11 | Re fixing only 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by Engineer in charge. |
| 12 | S&F in repairs GI tubing 20 mm bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floorcomplete all as specified and directed by Engineer in charge. |
| 13 | Re fixing only 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floorcomplete all as specified and directed by Engineer in charge. |
| 14 | S&F in repairs PVC water tank cover for 1000 Litre and 500 Litre capacity including proper fixing with clamp &nut bolt complete all as specified and directed by Engineer in charge. |
| 15 | Excavation in trenches in any type soil not exceeding 1.5 mtr wide and not exceeding 3.00 mtr in depth in foundation etc for manholes, sewage line and getting out Complete all as specifed and directed by Engr-In-Charge. |
| 16 | Excavation in trenches in any type soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth in foundation etc for manholes, sewage line and getting out Complete all as specifed and directed by Engr-In-Charge. |
| 17 | Returning filling in including spreading levelling , watering and well ramming in layers not exceeding 25 cm Complete all as specifed and directed by Engr-In-Charge. |
| 18 | Removing excavated material soft and loose soil exceeding 250 Mtr but n-exc 500Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point Complete all as specifed and directed by Engr-In-Charge. |
| 19 | Dismantling of cast iron reinforced concrete drain pipes of any size, jointed in cement mortar and taking out tranches if required complete all as specified and directed by Engineer in charge.(Note : Dismantling of any size Cast iron including PVC pipe involve without Extra charge. |
| 20 | M&L for Cutting into existing manholes any size or any type for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for 200mm thick concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150/200 mm SGSW pipes complete all as specifiedand as directed by Engr-In-Charge. |
| 22 | S&F for reinforcement concrete pipes, class NP-2 laid and jointed complete with collars bore of pipe 200mm , fixed in cement mortar 1:3 including demolition and breaking up drain of any dia pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F for reinforcement concrete pipes, class NP-2 laid and jointed complete with collars bore of pipe 150mm , fixed in cement mortar 1:3 including demolition and breaking up drain of any dia pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for cement concrete (1:4:8) type D-2 (40mm graded stone aggregate) in foundations Complete all as specifed and directed by Engr-In-Charge. |
| 25 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 Mtr mean radious built in CM (1:6) for man holes and external pointed flush in same mortar as the work proceeds including demolition of brick work Complete all as specifed and directed by Engr-In-Charge. |
| 26 | M&L Excepet Bricks work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as complete all as specified and directed by Engineer in charge. |
| 27 | S&F Cutting holes of surface area exc150 to 400 Sqcm into or through brick walls built in mud /cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed by Engineer in charge. |
| 28 | M&L for dismantling old abondand manhole by demolition filling with old debris received from item no. 6 and make good surface with PCC 1:2:4 complete all as specified and directed by Engineer in charge. |
| 29 | M&L PCC 1:2:4 type B1 (Using 20mm graded stone aggregate )as in benching, bed plates, coping and the like including weathering, slightly rounded or chamfered angles as direceted including necessary form work and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge. |
| 30 | M&L for forming fair finishing drain or channel 30 cm inner girth in cement concrete , using extra cement including forms, moulds etc complete all as specified and directed by Engineer in charge. |
| 31 | M&L Rendering 15mm thick cement plaster in cement mortar 1:4 on fair face of brick work or concrete surface, finished even and smooth without using extra cement, with waterproffing compound admixture 200 ml per bag of cement ao as per manufacture's instrutions complete all as specified and directed by Engineer in charge.Note:-Liquid water proofing admixture shall be paid in this item. |
| 32 | M&L Precast cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in manhole cover/drain cover set in CM 1:4 complete all as specified incl form work and complete all as specified and directed by Engineer in charge. |
| 33 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for slabs supported on Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses,complete all as specified and directed by Engineer in charge.Note : Reinforcement shall be measured and paid for separately. |
| 34 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick on concrete fair finished surfaces.(Horizontal or sloping) complete all as specified and directed by Engineer in charge. |
| 35 | M&L for deformed or TMT bars 6 to 8mm dia cut to length bent to shape including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer in charge. |
| 36 | M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer in charge. |
| 37 | M&L for 25mm thick PCC type BO 1:2:4 (12.5mm graded aggregate in flooring finishing rough to recieveing Top layer for flooring complete all as specified and directed by Engineer in charge. |
| 38 | M&L for glazed ceremic tiles 300x250x7 mm or 450x350x7 mm thick, as in dado, vertical surfaces set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed. |
| 39 | M&L for Joint free colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles complete all as specified and directed by Engineer in charge. |
| 40 | M&L chequered or machin pressed cement concrete coloured tiles table vibratory method using PU model conforming to IS 13801:1993 and ISI marked, size not less than 300mm x 300mm (Approx), thickness 25mm, as in floor, paving set and jointed in neat cement to match with gray pigment complete all as specified and directed by Engineer in charge. |
| 41 | M&L for Providing and laying at or near ground level actory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer in charge. |
| 42 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking pave rblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by Engineer in charge. |
| 43 | S&F for in repair Angle valve cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and directed by Engineer in charge. |
| 44 | S&F for in repair CP Bib taps long nose 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and directed by Engineer in charge. |
| 45 | S&F in repairs Health faucet (ABS body) mild steel chrpmium plated sutaible for 15 mm dia pipe with 1.25 Mtr long flexible tube and ABS Wall hook including making connections and fixed in position complete all as specified and directed by Engineer in charge. |
| 46 | S&F in repair CP Jet spary with one meter flexible tube 15mm dia for EWC including all connection complete all as specified and directed by Engineer in charge. |
| 47 | S&F Rotational moulded polyethylene water storage tank triple layered, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes including dismentaling complete all as specified and as directed by Engr-in-Charge. |
| 48 | S&F Rotational moulded polyethylene water storage tank triple layered, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including dismentaling complete all as specified and as directed by Engr-in-Charge. |
| 49 | S&F for repair toilet paper holder fancy type chromium plated screwed down for fixing to wall with screws complete all as specified and directed by Engineer in charge. |
| 50 | S&F in fixed in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe for cistren ete complete fixed in repairs complete all as specified and directed by Engineer in charge. |
| 51 | Taking down old unservicable SWR pipe of any dia inlcuding fittings complete all as specified and directed by Engineer in charge. |
| 52 | S&F 110 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps of suitable size complete all as specified and directed by Engineer in charge. |
| 53 | All as per Srl item No 53 above but laid in trenches or in floors ccomplete all as specified and directed by Engineer in charge. |
| 54 | S&F 75 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps of suitable size complete all as specified and directed by Engineer in charge. |
| 55 | All as per Srl item No 55 here -in-before but laid intrenches or in floors complete all as specified and directed by Engineer in charge. |
| 56 | S&F PVC (SWR) bends 110 mm dia complete all as specified and directed by Engineer in charge. |
| 57 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed by Engineer in charge. |
| 58 | S&F PVC (SWR) junction single ( single T ) equal or unequal 110mm dia complete all as specified and directed by Engineer in charge. |
| 59 | S&F 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc. complete all as specified and directed by Engineer in charge. |
| 60 | S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed by Engineer in charge. |
| 61 | S&F in reapir vitreous china wash down water closet pan (pedestal pattern) white complete including ‘P’ or ‘S’ trap , seat cover and fixing of flushing cistern, brackets, flushing pipe, and CP jet spray including CP flexible pipe for EWC etc complete all as specified and directed by Engineer in charge. |
| 62 | S&F in Vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding excluding connections to 'flushing cistern/pipe, 'Fixed in repair' complete all as specified and directed by Engineer in charge. |
| 63 | S&F for in repair 15mm dia 450mm long PVC connection with PTMT nut and washer complete all as specified and directed by Engineer in charge. |
| 64 | S&F in repair PVC grade \\"A\\" pipes 110mm bore laid in trenches and jointed on concrete bed, complete including testing etc complete all as specified and directed by Engineer in charge.and shown in drgs. |
| 65 | S&F in repair Stack clamps 75/100mm dia for out of 50 mm by 5 mm flat iron round 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof with proper manner complete all as specified and directed by Engineer in charge. |
| 66 | M&L with Tools grubbing up tree trunk including roots portion from wall /roof filling holes with PCC and making the surface finished with Cement plaster CM 1:3 upto 4th storey of Bldg complete all as specified and directed by Engineer in charge. |
| 67 | M&L for removal of vegitation / trees grith exc 30cm n. exc 100cm from wall, roof top and CI/PVC sewer lines on wall upto height of 4th storey bldgs incl waste materials removing from site upto the distance of 100m and area of removal places filling with PCC/CM 1:4 as site required,complete all as specified and directed by Engineer in charge.Note:- Contractor arrange his own suitable T&P as per site requirement and nothing extra shall be paid for the said work.PCC & CM 1:4 if any required will be measured and paid separately. |
| 68 | M&L Soakage well 3.60metre dia and 4.50metre deep below inlet (depth) from inlet pipe to ground level 45cm including excavation and earth work in any type of soil,PCC 1:4:8 type D-2 in foundation ,RCCM-25(design mix ) cover slab wall in honey combed brick work in cement mortar 1:4, earthcousinon brick lining on top ,filling with brick bats and inlet pipe 150mm dia complete all as specified and directed by Engineer in charge. |
| 69 | Supply and fixing in repairs vitreous china urinal flat back 465x355x265mm size , including grating and Connection to flushing pipe and outgoing pipe complete all as specified and directed by Engr-in-Charge. |
| 70 | Note:-i) All the complaint(s) received will be lodged & rectified by the contractor rep and will have to maintain a proper record as directed in complain register and in complain slip. (ii) Complain slip and complain register will be provided by the contractor without any extra charge.(iii) Complain register will be produced on daily basis to JE and Engr-in-charge (iv) The new items provided shall be measured and paid for separately under relevant items of Sch ‘A’.(v) If contractor fails to attend the complaints in 48 hours a recovery of Rs 300 shall recovered per complaint. (Vi) Saptic tank soakage well work will be Execute as per drawing and after complete the work all wastage material remove the side and dumping mtrial out side the Defence Land without any Extra charge. (vi) Any Misc items reqd viz. colours, putty, Machenically Equipment which are required on ground etc in the work should be deemed incl in the respective items of works and nothing extra shall be paid on the account. |
| 71 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender