Tender For special Rep Of Single Living Accn For Avs In No 2 Trg Bn Beg & Centre Roorkee Under Ge Roorkee
Tender Value
1.43 Crore
Estimated cost
Bid Submission
06 Oct 2026
10 days left
EMD
2.18 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Rep Of Single Living Accn For Avs In No 2 Trg Bn Beg & Centre Roorkee Under Ge Roorkee
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Sep-2026 | Amendment to dates | Date | 06-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed . |
| 2 | Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed. |
| 3 | Material and labour for except brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed. |
| 4 | Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 5 | M&L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid ) external surface all as specified |
| 7 | Supply only liquid water proofing compound of approved make. |
| 8 | M&L for Rendering 5 mm thick in cement mortar 1:3 on concrete/brick surfaces in ceiling, finished fair & even complete. |
| 9 | S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directedd. |
| 10 | M&L for preparing new plastered surfaces and applying two coats of oil bound distemper including 1mm thick wall care putty complete all as specified and directed. |
| 11 | M&L for applying two coats of cement base paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surfaces and 1 mm wall care putty complete all as specified and directed. |
| 12 | M/L for three coat of white wash on New surfaces Ceiling including all prepration complete all as specified & directed |
| 13 | Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site. |
| 14 | All as per item No. 13 above but exc 1.5 and nexc 4 sqm |
| 15 | Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed. |
| 16 | M&L for Framed work FE-410 W GRADE as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or othercovering. Doors, etc. to beprepared for hanging or slidingwith and including either hooksand hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) andhanging; also fastening and fixing complete all as specified and directed. |
| 17 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleatsfor securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 18 | S&F 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, and treated with tar or coal tar black paint for areatarred exc 0.1 sq. m but n exc 0.5 sq. m each ditto complete all as specified |
| 20 | M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description andtreating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc.,area n exc 0.1 sq. m each, complete all as specified. |
| 21 | S&F 35 mm Glazed and skeleton shutters of 2nd class hardwood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 22 | S&F 35 mm thick 2nd class Hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats. |
| 23 | S&F for Aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) frame for windows, csw ,ventiletor with one or more rebates joining cleat for fixing etc complete all as specified including concealed type lock for all three shutters all as specified and directed. |
| 24 | M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings for each leaf such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 25 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 26 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed. |
| 27 | M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed |
| 28 | S&F 100 mm long (size) butt hinges, Mild steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed. |
| 29 | S&F 200 mm long anodised aluminium tower bolt complete fixing to door complete all as specified and directed |
| 30 | S&F Extruded aluminium alloy handles, fabricated type, anodised of size 150mm size long complete all as specified and directed. |
| 31 | S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 32 | M&L for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with securing glass in metalframes in square n.exc. 0.5 sqm in each pane complete all as specified and directed. |
| 33 | M&L for 3.00 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 34 | S&F in repair 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete. |
| 35 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed. |
| 36 | S&F in Repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed. |
| 37 | S&F in repair stainless steel 25 mm dia curtain rod including all fixing brackets, stops including fannels complete all as specified |
| 38 | Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and as directed. |
| 39 | S&F 1.25 mm thick mild steel plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up complete all as specified and directed . |
| 40 | M&L for Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of pink primer complete all as specified and directed. |
| 41 | M&L for Preparing New Wooden surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed. |
| 42 | Demolition of cement concrete of any description in any position all as directed by Engineer -in-charge. |
| 43 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed by engineer in charge. |
| 44 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and as directed by engineer in charge. |
| 45 | M&L for 75 mm thick PCC 1:3:6 as in plinth protection surface finish even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L for 75 mm thick Cement concrete type B- 2, 1:3:6 (40mm graded aggregate as in flooring) as in sub base course complete all as specified and directed. |
| 47 | M&L for coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.o.06 sqm n exc. 0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 48 | M&L for glazed ceramic tiles 450x300x/7/300x200X 7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick in cm (1:4) backing coat complete all as specified and directed. |
| 49 | M&L for PCC 1:4:8 type D-2 (40mm crushed stone aggt) as in foundation , flooring sub base, mass concrete complete all as specified and directed |
| 50 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,grinding and polishing complete all as specified and direcetd. |
| 51 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed. |
| 52 | M&L for 18 to 20mm thick granite stone as in platforms / counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 53 | M&L for 25 mm thick PCC (1:2:4) Type B-1 20 mm stone aggt as in sub floor /roof/chajja complete all as specified and directed. |
| 54 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. Please Enable Macros to View BoQ information |
| 55 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender