Tender For special Rep Of Bldg No 267 At Rwa Shivaji Line Under Ge (South) Meerut Cantt
Tender Value
98.06 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
12 days left
EMD
1.72 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Rep Of Bldg No 267 At Rwa Shivaji Line Under Ge (South) Meerut Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Sep-2026 | Amendment to dates | Date | 06-Oct-2026 |
| 2 | 29-Sep-2026 | Amendment to date | Date | 15-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed |
| 2 | M&L for brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 3 | All as per item No 02 here- in- before but except bricks complete all as specified and directed. |
| 4 | Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for. |
| 5 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. |
| 6 | M&L for for 25mm thick PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in sub base floor etc complete all as specified.. |
| 7 | Material & labour for vitrified coloured tiles of size 1200x600 x thickness not less than 8 mm, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) |
| 8 | Material & labour vitrified coloured tiles of size 1200 x 600 x thickness not less than 8 mm, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 10mm thick rendering of CM (1:4) |
| 9 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm th screed bed in cm 1:6 complete all as specified & directed. |
| 10 | S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete, all as specified |
| 11 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc. complete all as specified & directed. |
| 12 | M & L for Udaipur green stone not less than 16 mm thick factory made bull nosed, pre polished (table rubbed and polished) as in jambs, window cill, cooking plateform and the like etc over screed bed 15 mm thick in CM 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone and making hole for gas pipe complete all as specified and directed. |
| 13 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed |
| 14 | M&L for machine cut prepolished kota stone slab flooring 20-25mm thick (including one piece for staircase step) over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:6 all as specified |
| 15 | M&L for machine cut prepolished kota stone slab flooring 20-25mm thick (in one piece for staircase) over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete bull nosed as in riser of steps, skirting/dadolaid over 10mm thick in cm 1:4 complete all as specified. |
| 16 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each. |
| 17 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each. |
| 18 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive ofM.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. |
| 19 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed. |
| 20 | S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising (including 01 Nos eye viewer/ magic eye at entrance main door with necessary fittings) of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with including and fixing necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 21 | M&L for gauzed shutter made out of box section with outer and locked frame of size 60mmx35mm (medium grade). The shutter shall be of pressed steel including fixing of 10 mm Square gaurd Bars (06 Nos in Horizontal directions & 05 Nos in Verical direction complete with fly proof wire mash having 0.63mm nominal dia wire and 1.40mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specfied and directed. |
| 22 | S&F, in repair, 18/19mm thick WPC Solid board, interior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including 75 mm Stainless steel handles on each shutter and hydraulic hinges fixed with SS Screws complete all as specified and directed. |
| 23 | S & F powder coated (colour of powder coating will be prescribed by Engineer-in-charge) aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutter each shutter width one half of length of window with following specification including making good to adjacent surfaces complete all as specified and directed. (a) Window frame of cross section of not less than 95mmx35mmx1.5mm thick (b) Three way track with sliding shutter of cross section of not less than 90mmx 30mmx1.1mm thick (c) Sliding shutter frame of cross section of not less than 40x18x1mm thick (d) Aluminium glazing strip size 18.2 x 16.66mm (e) S&F 5.5mm thick black glass (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter roller 1 nos (h) Two nos best quality sliding roller per shutter j) SS wire cloth 56mm with average aparture 1.4mm for one shutter (k) Fixing screws for frame 6 nos for each window complete all as specified and as directed |
| 24 | S&F powder coated (colour of powder coating will be prescribed by Engineer-in-charge) anodised aluminium Ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick pin headed glass complete all as specified and directed. |
| 25 | M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified. |
| 26 | M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer all as specified & directed |
| 27 | M&L for 125mm long Stainless steel handles, cast type, polished bright fixed with ss screw complete all as specified. |
| 28 | S&F Stainless steel tower bolts 150mm long, of extruded section complete all as specified & directed. |
| 29 | S&F Stainless steel sliding bolt 300 long bolt type with bright bolt not less than 10 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed |
| 30 | S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed. |
| 31 | S&F 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified |
| 32 | Supply & fix 50 mm wide rubber beading for doors of required size complete all as specified & directed. |
| 33 | S&F for mild steel 150mm size helical door spring including roller and roller plate fixed with screws to chowkat or welded to steel frame, complete all specified and as directed. |
| 34 | M&L 75mm thick PCC 1:3:6 type C-2 ( 40 mm graded aggrgate) as in plinth protection, path etc finished the surface even & fair complete all as specified |
| 35 | Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. |
| 36 | M&L for Rendering 15 mm thick in cement mortar (1:4) on bricks or concrete surface, finished even and smooth complete all as specified. |
| 37 | Material and labour for 12 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement |
| 38 | M&L for rendering 10 mm thick on brick or concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified. |
| 39 | M&L for preparation of new plaster surfaces of wall by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on wall surfaces and then applying two coat of exterior emulsion paint ( Apex or weather coat) Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 40 | M&L for preparation of new plaster surfaces of wall by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on wall surfaces and then applying two coat of oil bound distemper (OBD) Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 41 | M&L for preparation of new plaster surfaces of ceiling by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on wall surfaces and then applying two coat of oil bound distemper (OBD) Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 42 | M&L for complete removal of exisitng treatment on old external wall surfaces by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on all surfaces and then applying two coat of exterior emulsion paint ( Apex or weather coat) Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 43 | M&L for complete removal of exisitng treatment on old internal wall surfaces by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on all surfaces and then applying two coat of oil bound distemper. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 44 | M&L for complete removal of exisitng treatment on old ceiling surfaces by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on all surfaces and then applying two coat of oil bound distemper. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator) |
| 45 | M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account) |
| 46 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work |
| 47 | M & L for repairing existing RCC structure work by guniting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position as directed by Engr in-charge. |
| 48 | Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition)complete all as specified & directed. |
| 49 | M&L for Form work to sides and soffits of beams lintels etc finished rough |
| 50 | M&L for RCC 1:2:4 Type B0 using 12.5mm graded stone aggregate as in beams, lintels, bressummers over 1.5 m span etc.complete all as specified & directed. |
| 51 | Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc |
| 52 | S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. |
| 53 | All as per item No 52 here- in- before but 6 to 8 mm dia complete all as specified and directed. |
| 54 | Taking up or down steel tubing and connection 15 mm bore pipe and removing from site. |
| 55 | Taking up or down steel tubing and connection 20 mm bore pipe and removing from site. |
| 56 | Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 57 | Supply & fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 58 | Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete. |
| 59 | S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and complete all as specified. |
| 60 | S&F in repiar 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete. |
| 61 | S&F in repair chromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified |
| 62 | S&F in repair chromium plated 15 mm bore size two way Bib cock, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified. |
| 63 | S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as specified and as directed. |
| 64 | S&F in repair chromium plated 15 mm bore extension nipple 25mm-50mm long, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified. |
| 65 | S&F in repair of vitreous china pedestal pattern including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. |
| 66 | S&F in repair chromium plated health faucet with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed. |
| 67 | S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified. |
| 68 | S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed. |
| 69 | S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair. |
| 70 | S&F in repair 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022 |
| 71 | S&F in repair 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023 |
| 72 | S&f Iin repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 73 | S&F in repair fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 74 | S&F (in repair) chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed. |
| 75 | S&F (in repair) chromium plated towel ring 300 mm long as a approved quality.complete all as specified and directed. |
| 76 | Supply and fixing in repair PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed |
| 77 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.complete all as specified & directed. |
| 78 | S&F factory made 600 x 450 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) |
| 79 | Supply & fix in repair PVC connections of 600mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 80 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 81 | S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed |
| 82 | S&F in repair CP brass soap dish complete all as specified |
| 83 | Supply and fix in repair 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. as in waste complete all as specified & directed including taking down existing pipe. |
| 84 | Supply and fix in repair 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. as in waste and rain water pipes complete all as specified & directed including taking down existing pipe. |
| 85 | Supply and fix in repair 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to floor etc. as in waste and rain water pipes complete all as specified & directed including taking down existing pipe. |
| 86 | S&F in repair PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement. |
| 87 | S&F in repair PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement. |
| 88 | Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed. |
| 89 | Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed. |
| 90 | S&F 110mm PVC (SWR) vent cowl all as specified |
| 91 | S&F 110 PVC (SWR) junction single, (Single T) equal or unequal all as specified |
| 92 | S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof. |
| 93 | S&F stainless in repair steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed |
| 94 | S & F in repair 25mm dia Stainless steel decorated curtain rod with braket and ring/side knob complete all as specified and directed. |
| 95 | Treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified and as directed. |
| 96 | M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings CM 1:4 all as specified |
| 97 | M & L for cutting of bushes small trees (Peepal small plants or any other plant etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and pouring neccessary chemicals(pesticides, acids) as specified by Engineer-in-charge making good distrubed surfaces to match with existing finihes with and incl material and labore in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge |
| 98 | Taking down existing course of roof treatment, scale dirt etc. including racking out, hacking,scrubbing down with nano biowash and water, etc, complete all the specified and as directed. |
| 99 | Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 3% of the weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate). |
| 100 | M&L for providing cement concrete type B-1, Nano wall filler 1: cement 1: sand 3: agregrate 4 (20 mm graded aggregate) laid in roof including WPC and finished the surface even & smooth without using extra cement including demolition old pcc complete all as specified and as directed.Note:- WPC will be measured and paid seperately complete all as specified and as directed. |
| 101 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 102 | Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting) |
| 103 | S&F in repair built in steel cup board with pressed steel frame of size 75 mmx 45 mmx 1.25 mm thick with pressed steel shutter 1 mm thick Godraj pattern fixed to masonary wall by hold fast out of 25x3mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs, locking arrangement including spary painting with two coats of synthetic enamel paint over a coat of red oxide primer to all around on steel surface of frame and shutter and making good distrubed portion in CM 1:3 or PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate complete all as specfied and directed. |
| 104 | M&L for stone slab (Color as approved by GE) 25-30mm thick stone dressed true and square, in one length not less than 60 cm and n. exc 120 cm in plinth protection, copings, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed. |
| 105 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors soil complete all as specified and directed.. |
| 106 | Supply and fix in reapir Foldable Wall mounted Table with storage (approx wt 20-25 kgs) with dimensions as 50.8 cm x 86.4 cm x 139.7 cm (L x W x H format) made from Sheesham/Teak/Sal or other hardwood broad-leafed tree that make this furniture denser. Design,dimensions,alingment as per the drawings attached. Finish should be Honey/Walnut/Teak as approved by GE complete all as specified and directed. |
| 107 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 108 | M&L for Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n exc 25 mm thick complete all as specified and as directed. |
| 109 | M&L for Machine pressed precast concrete interlocking coloured paver block with grey cement and with pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 110 | Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, DBs, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces area. |
| 111 | Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC surface conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes 1.2 mm thick including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-One Tube light/bulb/fancy/street light point controlled by one, one way switch 05 / 06 Amps. |
| 112 | All as per item No 111 here -in- before but One ceiling fan/Exhaust fan point controlled by one, one way switch 05 / 06 Amps. |
| 113 | All as per item No 111 here -in- before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 114 | All as per item No 111 here -in- before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 115 | All as per item No 111 here -in- before but One Call bell point controlled by one, one way switch 05 / 06 Amps. |
| 116 | All as per item No 111 here -in- before but One Tube light controlled by two 2-way switches with 1.5 sq mmwire switch 05 / 06 Amps. |
| 117 | All as per serial item No 111 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 118 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts. |
| 119 | Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts. |
| 120 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete. |
| 121 | Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete . |
| 122 | Supply & fixing Call bell push button switch piano/ flush type, 05 / 06 Amps single pole, one way 240 volts. |
| 123 | Supply & fixing Call bell, AC 230 Volts single pole. |
| 124 | Supply and fixing decorative wall light fitting wall mounted type including LED lamp 9 Watt-01 No complete. |
| 125 | Supply and fix LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material all as specified and directed. |
| 126 | Supply and fix LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material all as specified and directed. |
| 127 | Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. |
| 128 | Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. |
| 129 | Supply and fixing Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and Accessories, 230 V, 1200 mm sweep with remote. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC)Note :- Old unsv ceiling fan of any sweep shall be deposited at MES store yard. |
| 130 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. |
| 131 | M&L for Sheet metal enclosure for DB's with IP 43 protection 100 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties & circuit identification labels 240 volt SPN 12 way. |
| 132 | Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 with the inbuilt and fixing of 1 No MCCB 4 Pole160Amps 36 KA, 415 volts and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed. |
| 133 | Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, B curve, 10 kA,. |
| 134 | Supply & fixing MCB SPN, AC, 240 volts of 40 to 63 Amps, B curve, 10 kA,. |
| 135 | Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed |
| 136 | Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 137 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed. |
| 138 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed by Engr-in-Charge. |
| 139 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 140 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed. |
| 141 | Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed. |
| 142 | Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, |
| 143 | Supply and fixing Wall Mounted fan heavy duty steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete. |
| 144 | Supply and fixing exhaust fan heavy duty steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete. |
| 145 | Supply & fixing industrial type SPN metal enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts . |
| 146 | Supply and fix electric water heater vertical storage type 25 Ltrsc apacity having stainless steel steel inner tank with glass enamelled coating BEE 5 star rating ,closed/ ventilated type 240 volt ,glass coated heating element with digital display complete with element 2.0 KW and all accessories including fixing arrgement with syitable size of fastner, nuts,bolts, PVC Pipe and waster etc. |
| 147 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete.Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 sqmm and 15 mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 days
Oct 15, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender