Tender For Replacement Of Old Reinforced Cement Concrete Posts With Metallic Posts Alongwith Chain Link Fencing At Various Locations In Tech Area At Af Stn Tezpur
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
87369
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Old Reinforced Cement Concrete Posts With Metallic Posts Alongwith Chain Link Fencing At Various Locations In Tech Area At Af Stn Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, brick work, masonry etc, including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 2 | Material and labour for excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in Soft/loose soil, complete all as specified and as directed by Engr in Charge. |
| 3 | Supply and fixing mild steel angle iron, flat iron for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc). including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe - 290 Gde E-165, complete all as specified and directed. |
| 4 | Material and labour for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and as directed. |
| 5 | Dismantling of old barbed wire fencing of any description, complete all as specified and as directed |
| 6 | Supply and fixing for galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2.00 mm dia barbs at 75mm spacings and straining, tightening and fixing to MS nibs embedded in pre-cast RCC fencing post or angle iron post, struts, etc. securing and tying at crossings with and provision of galvanized mild steel wire, complete all as specified and as directed. Note: Each line wire to be measured separately. |
| 7 | Dismantling fencing / wire mesh, any type complete all as specified and as directed. |
| 8 | Supply only MS galvanized chain link fencing of size or type as approved by the Engineer in Charge, complete all as specified and directed by Engr in Charge.Note : Fixing shall be measured and paid seperatly. |
| 9 | Fixing only chain link MS galvanized fencing of any size with GI wire/MS bolts including line wires any mesh, size and type to any type of standars rails/post, straining bolts,etc incl provision of binding wire, complete all as specified and directed. |
| 10 | Supply & fix 10mm dia mild steel round bars as stiffener to chain link fencing including necessary cutting bending etc. conforming to Grade-l, IS 432 (Part-I), complete all as specified and as directed. |
| 11 | Material and labour for preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 12 | Material and Labour for preperation of new steel surface of any description, not exceeding 10cm in width or girth when unconnected and applying two coat of synthetic enamal paint over a coat of red oxide primer, complete all as specified and directed. |
| 13 | Supply and fix mild steel bolts (machine made) with hexagonal head at one end and screwed the other end, each screw end to be fitted with two washers and one nut hexagonal, dia of shank 10 mm, length of bolt exc 50 mm but n.exc 100mm, complete all as specified and as directed. |
| 14 | Surface dressing n.exc 15 cm deep incl site clearance in soft/loose soil, complete all as specified and as directed by engr in charge. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender