Tender For Special Repair To Bldg No T-124 (Garage), T-109, T-67 And T-97 At R Ur Under Ge 969 Ews.
Tender Value
41.85 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
18 days left
EMD
83700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-124 (Garage), T-109, T-67 And T-97 At R Ur Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. |
| 2 | Supply and fix Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 3 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering /ridge/Valley gutters/cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 4 | M&L for dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc, complete all as specified and as directed. |
| 5 | M&L for Machine cut Kota stone slab flooring 20-25 mm thick laid over 20 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and as directed. |
| 6 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 7 | M & L 2nd class soft wood Weather boarding,clean sawn, plain,20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps, complete all as specified and as directed. |
| 8 | S&F second class softwood 20mm thick facia boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed. |
| 9 | Dismantling fillets,rails,posts,rafters,purlins,etc under 40Sqcm in section, complete all as specified and as directed. |
| 10 | M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads, complete all as specified and as directed. |
| 11 | M&L 2nd class soft wood Plain fillets n.exc 3 Sq.cm , rectangular in section, clean sawn screwed with nails or brads, complete all as specified and as directed. |
| 12 | S&F Softwood 2nd class Clean sawn with butt joints Eaves boards 20 mm thick, complete all as specified and as directed. |
| 13 | Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed. |
| 14 | M & L 2nd Class soft wood (Kail) as in scantling, clean swan timber fixed, complete all as specified and as directed. |
| 15 | All as per Ser item No 14 above but except timber complete all as specified and directed. (Note : Serviceable timber obtained from ser item No 13 above to be used). |
| 16 | M&L for two coat of synthetic enamel paint over a coat of pink primer including on surface of wood or wood based of any description, complete removal of snowcem/white wash etc, complete all as specified and as directed. |
| 17 | M&L for preparation of new or previously untreated surface and applying two or more coat of the Fire resistant paint over surfaces of any description wood over a coat of primer, complete all as specified and as directed. |
| 18 | Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level, complete all as specified and as directed. |
| 19 | M & L for 75 mm thick in PCC 1:3:6 type-C2 as in plinth protection surface finished even and smooth without using extra cement, complete all as specified and as directed. |
| 20 | Forming of construction joints 65mm deep x 10mm wide, filled with sealing compound grade 'A', complete all as specified and as directed.. |
| 21 | Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each and removing from site, complete all as specified and as directed. |
| 22 | S & F 35 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side, complete all as specified and as directed. |
| 23 | S&F 100mm size, butt hinge medium weight cold rolled mild steel & fixed, complete all as specified and as directed. |
| 24 | S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed, complete all as specified and as directed. |
| 25 | S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 26 | S&F 150mm size aluminum handles, cast type anodised, complete all as specified and as directed. |
| 27 | Taking down steel/wooden windows/vents with frames/ shutters n.exc 1.5 sqm ( without taking off shutter from frame ), complete all as specified and as directed. |
| 28 | S&F Powder coated aluminium sliding windows frame with movable shutter and aluminium grill ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing(vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 29 | M&L for Taking down cement or cement-lime mortar plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water of any description etc, complete all as specified and as directed. |
| 30 | M&L for rendering 10mm thick in CM 1:6 on wall/vertical surface of brick /concrete surfaces including surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 31 | M&L for 5 mm thick cement plaster in CM 1:4 with WPC over 10 mm thick dubbing coat in CM 1:6 finished even and fair on wall surfaces of brick/ concrete works all as specified and directed. Note: WPC shall be measured and paid separately |
| 32 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 33 | M&L for preparing new surface of wall and applying two coats of Oil bound Distemper over a coat of alkali resistant primer over 3 mm thick wall care putty to internal surfaces of wall complete all as specified and as directed. |
| 34 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer etc, complete all as specified and as directed. |
| 35 | Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level), complete all as specified and as directed. |
| 36 | M&L for PCC 1:2:4 type B2, 100mm thick (using 40mm graded stone aggregate) as in flooring finishing cement concrete surface even and smooth without using extra cement finish, complete all as specified and as directed. |
| 37 | Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards, slabs/ blankets, any thickness, complete all as specified and as directed. |
| 38 | M & L for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium, complete all as specified and as directed. |
| 39 | S&F for anodised aluminium snap grid frame work for false ceiling , complete all as specified and as directed. |
| 40 | Demolition of RCC broken slabs in any position and removing the debris off, complete all as specified and as directed. |
| 41 | M & L for RCC 1:2:4, type B1, using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves and the like, complete all as specified and as directed. |
| 42 | M & L for TMT bars 6 to 8mm dia bars cut to length bent to shape as required including cranking, bending, binding with mild steel wire annealed not less than 0.9mm dia as in reinforcement, complete all as specified and as directed. |
| 43 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed. |
| 44 | M & L for old size brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and as directed. |
| 45 | M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick / concrete surfaces and finished fair and even without using extra cement, complete all as specified and as directed. |
| 46 | M&L for preparation of old wall surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying TWO coat of white wash including cleaning the floor/joinery surfaces, glass panes, complete all as specified and as directed. |
| 47 | M&L for preparation of old painted surfaces of steel and iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 48 | S&F PVC (SWR) of dia 160 mm rain water pipes confirming to IS 13592 type 'B' including necessary rubber ring joints fix with velly gutter along wall or cleading, complete all as specified and as directed. |
| 49 | S&F 160 mm dia PVC (SWR) bends any radius, complete all as specified and as directed. |
| 50 | M&L for PCC 1:5:10, type E2, 100mm thick (using 40mm graded stone aggregate) as in sub base, complete all as specified and as directed. |
| 51 | Labour for 50 mm thick Sand filling and levelling under 60mm thick interlocking paver block, complete all as specified and as directed. |
| 52 | M & L for Machine pressed precast conctete interlocking paver block with gey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and as directed. |
| 53 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed. |
| 54 | M & L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 55 | M&L for PCC 1:2:4 type B-1 25mm thick (20mm graded aggregate) as in floors etc, complete all as specified and as directed. |
| 56 | M&L 4mm thick Pine wood veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling, complete all as specified and as directed. |
| 57 | M&L for 4 mm thick Pine wood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work on wall, complete all as specified and as directed. |
| 58 | S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm, complete all as specified and as directed. |
| 59 | S&F second class hardwood plain fillets square, rectangular in section not exc 3 Sqcm, complete all as specified and as directed. |
| 60 | M & L for broken stone or boulders hardcore of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 61 | M & L Preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 62 | S&F 100mm size, butt hinge medium weight cold rolled mild steel & fixed, complete all as specified and as directed. |
| 63 | S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed, complete all as specified and as directed. |
| 64 | S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 65 | S&F 150mm size aluminum handles, cast type anodised , complete all as specified and as directed. |
| 66 | S&F in repairs MS decorative curtain rod 20 mm dia covered with coloured PVC layer with decorative ends incl PVC Knobs and MS Bracket both ends, complete all as specified and as directed. |
| 67 | M&L for preparation of old painted surfaces of steel and iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 68 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 69 | S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-290 Gde E-165, complete all as specified and as directed. |
| 70 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm wide or girth incl preparation of surface etc, complete all as specified and as directed. |
| 71 | Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface, complete all as specified and as directed. |
| 72 | M&L for point wiring using proper colour coding in PVC casing capping using 1.5 Sqmm multi stranded FRLS copper conductor cable including clamps, screws, gutti/plug etc complete with PVC switch board, PVC insulated FRLS copper earth continuity conductor of size 1.5 Sqmm complete all as specified and directed. |
| 73 | (a) One light point/fan point/Ex fan point/bell point controlled by one 5 Amps switch one way |
| 74 | (b) One 3 pin 5 Amp switch socket outlet on same board with accessories |
| 75 | (c) One 3 pin 5 Amp switch socket outlet on Independent board with accessories |
| 76 | M&L for point wiring using proper colour coding in non-metallic PVC casing & caping/ concealed in wall/ceiling/floor/roof etc including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor. |
| 77 | S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed |
| 78 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed |
| 79 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed. |
| 80 | S&F Switch Socket Combinationt 2 in 1, 3 pin, 6 Amps, flush type complete with gang box all as specified and as directed. |
| 81 | S&F ceiling rose surface with 2/3 terminals, complete all as specified and as directed. |
| 82 | S&F in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and as directed |
| 83 | S&F in repairs Distribution Board, SPN 4 Way, Double door complete all as specified and as directed |
| 84 | S & F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and as directed |
| 85 | S & F MCB Single pole 6-32A Amps 240 Volts B Curve complete all as specified and directed |
| 86 | S& F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. |
| 87 | M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM, Make PVC flexible copper wire : Havells/Polycab/Finolex/Anchor. |
| 88 | M&L for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in sevice connections suspended by insulating hangers with two single core cables flat or circular 16 sqmm 2 core, complete all as specified and as directed. |
| 89 | Supply and fixing 1x20 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting, complete all as specified and as directed. |
| 90 | S&F LED Lamp 9 W 'T' type. Make Havells/ Philips / Bajaj/Crompton |
| 91 | Supply and fixing angular holder, PVC body complete with wiring etc. all as specified and directed. Make : Bajaj/CG/ Philips/ Wipro or equivalent. |
| 92 | M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed. |
| 93 | Supply and fix in repair energy efficient LED street light fitting of 60 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDS with secondary optics, efficacy 110/120 LPW, IP 66 protection aerodynamically designed for all weather conditions with efficient thermal management including 10 KV SPD complete all as directed by Engineer in Charge.Model: make CG or equivalent model of Havells, Bajaj, Wipro, Halonix |
| 94 | S & F modular type switch 6 Amps, one way one module complete all as specified. |
| 95 | S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module, complete all as specified and as directed. |
| 96 | S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module, complete all as specified and as directed. |
| 97 | Material and labour for white cover with frame suitable for accommodating 01 Nos module switch/socket etc, complete all as specified and as directed. |
| 98 | Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc, complete all as specified and as directed. |
| 99 | Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc, complete all as specified and as directed. |
| 100 | Material and labour for white cover with frame suitable for accommodating 4 Nos module switch/socket etc, complete all as specified and as directed. |
| 101 | Material and labour for white cover with frame suitable for accommodating 6 Nos module switch/socket etc, complete all as specified and as directed. |
| 102 | Material and labour for white cover with frame suitable for accommodating 8 Nos module switch/socket etc, complete all as specified and as directed. |
| 103 | Supply and fix SMD LED panel recess/surface 15 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed. |
| 104 | M&L for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of galvanised iron or steel as shown in electrical plate No. 3 Connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed. |
| 105 | Note:- Schedule of credit Rs 1,46,788.80 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender