Tender For Modernisation Works Under National Mission On Libraries. Sw:- Providing Iei.
Tender Value
14.08 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
0 days left
EMD
28180
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modernisation Works Under National Mission On Libraries. Sw:- Providing Iei.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Linear LED Luminaire of minimum 36 W capacity, complete with high-efficiency LED module, integral electronic driver, opal/diffused polycarbonate diffuser, fixing hardware and all other standard accessories required for suspension. The luminaire shall be available in Warm White (3000 K), Neutral White (4000 K) or Cool Daylight (5700–6500 K), suitable for operation on 230 V, 50 Hz AC supply.Make: Luker.Model: LTH36 or equivalent. |
| 2 | Supply of Round/Square Surface/recessed Mounted LED Panel Light of minimum 12 W capacity, high-efficiency LED module, integral electronic driver, diffuser, and all standard accessories, fixing hardware and mounting arrangements required for installation. The luminaire shall be suitable for operation on 230 V, 50 Hz AC supply and shall provide uniform illumination.Make: Luker.Model: LCL12NR or equivalent |
| 3 | Supply of 5 star, BLDC Ceiling Fan of 1200 mm sweep, complete with energy-efficient BLDC motor, electronic speed regulator, downrod, canopies, shackle assembly, blades, safety arrangements, and all standard accessories supplied by the manufacturer, suitable for operation on 230 V, 50 Hz AC supply.Make: Crompton.Model: Energion Riviera or equivalent of Havells / Orient / Atomberg / Bajaj / Crompton, conforming to the above specifications and approved by the Engineer-in-Charge. |
| 4 | SITC of Air Conditioner Distribution Board (AC DB) of appropriate capacity, comprising sheet steel enclosure with Miniature Circuit Breaker (MCB) of suitable rating, complete with neutral link, earth bar, DIN rail, busbar, interconnections, cable glands, fixing hardware, screws and all other accessories required for complete installation, testing and commissioning, suitable for operation on 230/415 V, 50 Hz AC supply, complete in all respects as directed by the Engineer-in-Charge.Make: Havells.Model: DHDMCSN0251020 or equivalent |
| 5 | Supplying, installation, testing and commissioning of 320A, TPN HRC in sheet steel enclosure, complete with HRC fuses as required, suitable for 415V, 50Hz AC supply, having adequate breaking capacity. The enclosure shall be fabricated from CRCA sheet steel, duly powder coated, and provided with all standard accessories. The work includes fixing, interconnections, earthing, cable glandings, end terminations, and all necessary hardware and accessories required for complete installation.Make: Havells or equivalentModel: IHFSTW4320 |
| 6 | SITC of 4-Way Busbar Chamber with 400 A tinned copper busbars enclosed in a robust sheet steel enclosure, suitable for 415 V, 3-phase, 4-wire, 50 Hz AC supply, complete with factory-fitted end terminations, insulated busbars, neutral link, earth bar, cable entry provisions, gland plate, fixing hardware, internal connections, mounting accessories and all other materials required for complete installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.Make: Havells.Model: IHBC040004 or equivalent |
| 7 | SITC of 6-Way Vertical MCCB Distribution Board with single-door sheet steel enclosure, suitable for 415 V, 3-phase, 4-wire, 50 Hz AC supply, complete with 200 A, 3-pole MCCB incomer having a minimum breaking capacity of 36 kA, tinned copper busbars of suitable current rating, neutral link, earth bar, removable gland plates, cable alley, factory-fitted end terminations, interconnections, cable glands, fixing hardware, mounting accessories and all other materials required for complete installation, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.Make: L&T.DB Model: DBVTH006SD or equivalent.MCCB Model: DU250 (CM98060OOOO), 200 A, 3 Pole, 36 kA or equivalent |
| 8 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 9 | Group C |
| 10 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 11 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 12 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 13 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 14 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 15 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 16 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 17 | Supplying and fixing suitable size GI/plastic box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 18 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 19 | 4 way (4 + 12), Double door |
| 20 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 21 | Single pole |
| 22 | Triple pole |
| 23 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | 63 A Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender