Public Administrative Department Local Bodies Closing in 4 days TDR #57247845

Tender For Renovation Of Upgradation High School Barlanga ,Block - Gola, Ramgarh

Issued by Local Bodies · Ramgarh, Jharkhand
Tender Value
1.55 Crore
Estimated cost
Bid Submission
03 Sep 2026
4 days left
EMD
3.12 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Upgradation High School Barlanga ,Block - Gola, Ramgarh

BOQ

Name of Work:- RENOVATION OF UPG HIGH SCHOOL BARLANGA ,BLOCK - GOLA, RAMGARH
Sl. No. Item Description
1CIVIL WORKS
2Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
3Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
4Providing 12 mm thick cement plaster (1:6)with clean coarse sand of F.M 1.5--do- -do--complete job.
5Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
6Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
7Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
8Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
9Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)
10Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)
11Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
12Providing and laying 1mm thick white cement based wall putty--do--do--complete.
13Providing two coats of oil bound distemper of approved shade and make over old Surface-do-.
14Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
15Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
161:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mmnominal size)
17Labour for scrapping old paint with paint remover and below lamp as required on wooden or steel surface including cost of all labour and materials and scaffolding all complete as per building specification and direction of E/I.
18Providing 50mm thick 2nd class patent stone flooring (1:2:4) in floor……..do…do
19Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I.
20Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced……membrane: 3mm Thick
21PROVIDING 16 mm DIA. FAN HOOKS
22Lettering with black Japan paint of approved brand and manufacture ( Writing Name of School)
23Carraige of Materials:-
24(A) Sand - (1+9) km
25(B) S/Chips - (1+19) km
26Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C
27Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor
28Circuit/submain wiring in PVC conduit
292X2.5 sq mm +1 x 2.5sq mm earth wire
302X4sq mm +1 x 4sq mm earth wire .
31Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution
3212way SPN double door.
33Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series
346/32amp Single pole
35Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit
366/32amp SPN
37Supplying and Fixing following size/modules, GI box along with modular base,cover plate….etc as required.
38S/F ceiling rose including connection etc.as reqd.
39S/F brass battan / angle holder including connection etc.as reqd.
40Supplying and fixing following Modular type
415/6 amps switch
425/6 amps socket outlet
43Electronic step type fan regulator, modular type
44ITC of ceiling fan
45S/F/F 1200 mm SWEEP CEILING FAN WITH REGULATOR
46S/F/F 15/16 W LED BULB
479'' EXHAUST FAN
48P/F 25mm x 5mm copper earth strip in surface/ recess :-
49Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc., as required.
50S/L 25 mm x 6 mm G.I. earth strip in ground :-
51Supplying and laying 25 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.
52P/F G.I. lightning conductor finial :-
53Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
54G.I. earth plate electrode :-
55Earthing with G.I. earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
56P/ F G.I. Lightning conductor tape in horizontal run :-
57Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (horizontal run).
58P/ F G.I. Lightning conductor tape in vertical run :-
59Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (vertical run).
60Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
61Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required.
623.5c x 95 sq.mm
6311 KV cable laying upto 120 sq.mm. in same trench :- Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
64E/W in excavation in foundation
65P/L of 60 mm thick Paver block
66Providing PCC (1:2:4)
67Carriage of materials -
68(A) Sand - (1+9) km
69(B) S/Chips - (1+19) km
70E/W IN EXCAVATION IN FOUNDATION
71E/W IN BACK FILLING
72PROVIDING SAND IN FILLING
73PROVIDING 75B, B/F/S
74PROVIDING PCC M20 IN FOUNDATION
75reinforced cement concrete work in beam suspended floor lintels band plinth with nominal mix of( 1:1.5:3)
76Brick work in foundation and plinth (1:4)..…d0…d0…..
77Providing tor steel reinforcement of 8mm ,10mm 12mm and 16mm…do……..do……
78Providing 12 mm thick cement plaster (1:3) and punning
79Structural steel work in single section, fixed with or without connecting plate,including……….all complete.
80Providing and fixing of galvanised iron profile sheet of 0.50 mm total coated thickness do…do…complete job.
81Providing and fixing UV stabilized fibreglass reinforced plastic sheet roofing upto any pitch.. do…do…complete job.
82Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating…….using self drilling/ self tapping screws complete :12.51.1 Ridges plain (500 - 600mm)
83Providing two coat of SE Paint with one coat of primer on steel surface…..E/I.
84Carriage of materials
85i) Bricks
86ii) Sand
87iii) S/Chips
88Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work
8915 mm nominal
9020 mm nominal
91Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal
92Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job 125 mm thick wall
93Providing and fixing gate valve of approved quality with complete job, 25 mm dia
94Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
95Providing and fixing PTMT bib cock of approved quality and colour.
96Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
97Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job , 580 mm long with 12.50 liter low level PVC Cistern
98S/F/F PVC S.W.R pipe (Supreme)
99110 mm
10075 mm
101PROVIDING URINAL FOR GENTS
102Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. Flexible pipe 32mm dia.
103Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
104Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion
105110x110x110mm Single tee without door
10675mm bend
107110 mm bend
108Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.
109110 mm
110E/W IN EXCAVATION IN FOUNDATION
111Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches.....do.
112PROVIDING SAND IN FILLING
113PROVIDING 75A, B/F/S
114Providing P.C.C M20 in foundation and plinth
115PROVIDING 50mm THICK PCC M20 IN DPC
116PROVIDING 75B, B/W(1:6) IN foundation and plinth
117PROVIDING 75 B, B/W(1:6) IN S & S
118Providing 125 mm th. 75A B/W (1:4) in S/S
119PROVIDING RCC M20 IN SLABS
120Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
121Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
122providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing -do-do- TMT Fe-500 (Only Valid for SAIL & TATA Steel)
1238mm (75%)
124Providing and laying rectified glazed ceramic floor tiles--do--do--complete job. 300x300mm Size
125Providing and laying 6 mm precast white glazed tiles in walls over 12 mm cemnt slurry -do-flush pointed
126Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
127Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.
128CARRIAGE OF MATERIALS
129(A) Sand - (1+19) km
130(B) S/Chips - (1+29) km
131( C ) Bricks-(1+7)KM
132E/W IN EXCAVATION IN FOUNDATION
133E/W IN BACK FILLING
134Filling in foundation trenches and plinth in layers.. Obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I
135PROVIDING SAND IN FILLING
136PROVIDING 75B, B/F/S
137PROVIDING PCC M15 IN FOUNDATION
138PROVIDING RCC M20 IN FOOTINGS
139PROVIDING RCCM20 IN COLUMNS
140PROVIDING 75B, B/W(1:6) IN F & P
141PROVIDING 50mm THICK PCC M20 IN DPC
142PROVIDING 75B, B/W(1:6) IN S & S
143PROVIDING RCC M20 IN LINTEL BAND, BEAMS etc.
144PROVIDING TOR STEEL IN REINFORCEMENT
14510 mm
14612 - 20 mm
147COST OF Centering and shuttering for -Chhajja
148(5.3.17.20)ROOF
1495.3.17.21 TIE BEAM
1505.3.17.1 COLUMNS footing=2*27*(4.5+4)*1.0
1515.3.17.6 COLUMNS in S/S
1525.3.17.7 STAIR
153PROVIDING 6 mm CP(1:4) IN CEILING
154PROVIDING 12 mm CP(1:6) ON WALLS
155PROVIDING 12 mm CP(1:3) ON WALLS WITH 1.5 mm PUNNING ON OUTER WALL BETWEEN GL TO PL
156Finishing walls with acrylic smooth exterior paint
157Providing and applying white cement based putty of average thickness of 1mm
158PROVIDING 2- COAT OF OBD WITH ONE COAT OF PRIMER
159PROVIDING 16 mm DIA. FAN HOOKS
160PROVIDING m.s. sheet gate with chowkhat
161PROVIDING 20x6 mm m.s. grill
162PROVIDING 2- COAT OF SE PAINT WITH ONE COAT OF PRIMER ON STEEL SURFACE
163MAKING PLINTH PROTECTION
164Providing 50mm th. CC in flooring
165Lettering with Black japan paint
166CARRIAGE OF MATERIALS
167(A) Sand - (1+19) km
168(B) S/Chips - (1+29) km
169(C ) BRICKS - (1+7) KM
170Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 4382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes.
17175mm Diameter
172Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion
17375mm bend
174Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.
175110 mm
176Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C
177Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor
178Circuit/submain wiring in PVC conduit
1792X2.5 sq mm +1 x 2.5sq mm earth wire
1802X4sq mm +1 x 4sq mm earth wire .
181Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution
18212way SPN double door.
183Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series
1846/32amp Single pole
185Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit
1866/32amp SPN
187S/F ceiling rose including connection etc.as reqd.
188S/F brass battan / angle holder including connection etc.as reqd.
189Supplying and fixing following Modular type
1905/6 amps switch
1915/6 amps socket outlet
19215/16 amps switch
19315/16 amps socket outlet
194ITC of ceiling fan
195S/F/F 1200 mm SWEEP CEILING FAN WITH REGULATOR
196S/F/F 15/16 W LED BULB
197S/F/F 20 W LED STREET LIGHT
198EARTH WORK IN EXCAVATION IN OF FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I. (5.1.1 bcd)
199Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume) do....do....5.1.7
200Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) (5.1.10 bcd)
201Providing designation 75-B, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge. (5.6.3 bcd)
202Providing P.C.C/R.C.C. M-20 with nominal mix of (1:1.5:3) in Foundation with approved quality of stone chips (20 to 6 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. (5.3.10 bcd)
203Providing RCC M200 with nominal mix of (1:1.5:3) in plinth beam ---- do ---- all complete as per building specification and direction of Engineer Incharge.( 5.3.11 bcd)
204Providing RCC m.200 with nominal mix of (1:1.5:3) in columns ---- do ---- all complete as per building specification and direction of Engineer Incharge. ( 5.3.10 bcd)
205Providing designation 75 B BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge. ( 5.2.11 bcd)
206Providing PCC M15 with nominal mix of (1:2:4) in band coping at Top of Wall. ( 5.3.2.2 bcd)
207Providing 12 mm thick water proof CEMENT PLASTER (1:6) clean coarse sand of F.M.1.5 and 1.5mm cement punning including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I . ( 5.7.1 bcd)
208Providing two coat of snowcem of approved shade and make over on a new surface all complete job as per specification and direction of E/I 5. 8 .24 bcd
209Supplying, fixing, & ftting M.S Gril Gate do…do…. all complete job. 5.5.30
210Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia …….do………….do…..(dsr 16.53)
211Supplying fitting and fixing M.S angle 40x40x4mm IS2062 gade A Angle hoising in steps welded anchorage fixed in concrete steps at the time of casting do,………..do………..(5.5.33)
212TOR STEEL @100 KG /M3 OF R.C.C. TOTAL STEEL QTY. (5.5.5)
213Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and StrutS ….do…..do…..5.3.17.6
214Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc...do….do…..5.3.17.5
215carriage of material Cement
216Cement
217steel
218Stone chips
219bricks
220Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
221Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
222E/W IN EXCAVATION IN FOUNDATION
223E/W IN BACK FILLING
224Filling in foundation trenches and plinth in layers... earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I
225PROVIDING SAND IN FILLING
226PROVIDING 75B, B/F/S
227PROVIDING PCC M15 IN FOUNDATION
228PROVIDING RCC M20 IN FOOTINGS
229PROVIDING RCCM20 IN COLUMNS
230PROVIDING 75B, B/W(1:6) IN F & P
231PROVIDING 25mm THICK PCC M20 IN DPC
232PROVIDING 75B, B/W(1:6) IN S & S
233PROVIDING RCC M20 IN LINTEL BAND, BEAMS etc.
234PROVIDING TOR STEEL IN REINFORCEMENT
23510 mm
23612 - 20 mm
237COST OF Centering and shuttering
2385.3.17.19 CHAJJA (including edges)
2395.3.17.20 ROOF SLAB
2405.3.17.21 TIE BEAM
2415.3.17.1 COLUMN FOOTING
2425.3.17.6 COLUMN
243PROVIDING 6 mm CP(1:4) IN CEILING
244PROVIDING 12 mm CP(1:6) ON WALLS
245PROVIDING 12 mm CP(1:3) ON WALLS WITH 1.5 mm PUNNING ON OUTER WALL BETWEEN GL TO PL
246PROVIDING PUTTY ON WALLS AND CEILING
247PROVIDING 2- COAT OF SNOWCEM WITH ONE COAT OF PRIMER
248PROVIDING 2- COAT OF OBD WITH ONE COAT OF PRIMER
249PROVIDING 16 mm DIA. FAN HOOKS
250PROVIDING m.s. sheet gate with chowkhat
251PROVIDING 20X6 MM MS GRILL
252PROVIDING 2- COAT OF SE PAINT WITH ONE COAT OF PRIMER ON STEEL SURFACE
253MAKING PLINTH PROTECTION
254PROVIDING 150 mm WIDE BRICK DRAIN
255Providing 50mm thick 2nd class patent stone flooring (1:2:4) in floor.
256Providing 125mm thick 75A B/W(1:4) in S/S
257PROVIDING PRECAST RCC SLAB
258PROVIDING 12 mm CP(1:4) WPCP
259CARRIAGE OF MATERIALS
260(A) Sand - (1+9) km
261(B) S/Chips - (1+19) km
262(C ) BRICKS - (1+7) KM
263Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work
26415 mm nominal
265Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal
266Providing and fixing gate valve of approved quality with complete job, 25 mm dia
267Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
268Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not lessthan 93 gms
269Supplying, fitting and fixing Kitchen sink…..required.Kitchen sink without drain board17.10.2.1 610x510 mm bowl depth 200 mm
270Providing and fixing male ended 15mm size C.P brass pillar cock (wt not less than 350gms) C.I body brass spndle pillar cock of approved quality as per specification and direction of E/I.
271b) C.I. body brass spindle
272S/F/F PVC S.W.R pipe (Supreme) - 75mm
273Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm drybrick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
274Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion
27575mm bend
276Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.
277Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C
278Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor
279Circuit/submain wiring in PVC conduit
2802X2.5 sq mm +1 x 2.5sq mm earth wire
2812X4sq mm +1 x 4sq mm earth wire .
282Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution
28312way SPN double door.
284Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series
2856/32amp Single pole
286Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit
2876/32amp SPN
288Supplying and Fixing following size/modules, GI box along with modular base,cover plate….etc as required.
289S/F ceiling rose including connection etc.as reqd.
290S/F brass battan / angle holder including connection etc.as reqd.
291Supplying and fixing following Modular type
2925/6 amps switch
2935/6 amps socket outlet
29415/16 amps switch
29515/16 amps socket outlet
296Electronic step type fan regulator, modular type
297ITC of ceiling fan
298S/F/F 1200 mm SWEEP CEILING FAN WITH REGULATOR
299S/F/F 15/16 W LED BULB
3009'' EXHAUST FAN
301300 mm dia. deep borewell - supplying all materials, labours, tools & equipments for drilling
302(a) from 0.00 m to 90.0 m
303(b) from 90.0m to 150.0m
304Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, 200 mm nominal size
305Development of tube well in accordance with IS : 2800 (part I) and IS: 11189,
306Providing and fixing suitable size threaded mild steel cap for borewell of 200mm dia
307Providing and fixing suitable size threaded mild steel clamp for borewell of 200mm dia
308Supplying 100 mm dis submersible pump set confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head……..upto 20 stages. 1.5 H.P.
309Supplying,fitting and fixing of standard make starter Panel Board with arrangement……all complete job as per direction of E/I.
310supplying, fitting and fixing 3 core 4 sq.mm flat copper submersible cable FINOLEX/HAVELLS make including……….etc. as per direction of E/I.
311Supplying, fitting and fixing lowering 40 mm dia CPVC Column pipe…do…do..all complete job as per direction of E/I.
312E/W in excavation in foundation
313P/L of 60 mm thick Paver block
314Providing PCC (1:2:4)
315Carriage of materials -
316(A) Sand - (1+9) km
317(B) S/Chips - (1+19) km
318GST @18%
319LABOURCESS @1% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57247845
AUTHORITY Local Bodies
TENDER VALUE 1.55 Crore
LAST DATE 03-09-2026
Authority
Authority Name Zilla Parishad
Work Description Tender for Renovation Of Upgradation High School Barlanga ,Block - Gola, Ramgarh
Basic Detail
Tender No ZP/RAMGARH/08/2026-27
Bidding Type Tender
Location
City Ramgarh
State Jharkhand
Key Dates
Publish Date 27 Aug 2026
Submission Date 03 Sep 2026
Open Date 05 Sep 2026
Finance
Tender Value 1.55 Crore
Tender Fee 10000
EMD 3.12 Lakhs
Exemption Not Available
Document List
05SBDUPGBARLANGA.pdf
BOQ_159539.xls
d55848ca-6c03-4152-b0c3-82e20803f3db.html
Tendernotice_1 (22).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Sep 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
pdf

05SBDUPGBARLANGA.pdf

xls

BOQ_159539.xls

html

d55848ca-6c03-4152-b0c3-82e20803f3db.html

pdf

Tendernotice_1 (22).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders