Public Administrative Department Local Bodies Closing in 3 days TDR #57247843

Tender For Renovation Of Pm Shri Upgradation High School Bariyatu ,Block - Gola, Ramgarh

Issued by Local Bodies · Ramgarh, Jharkhand
Tender Value
1.11 Crore
Estimated cost
Bid Submission
03 Sep 2026
3 days left
EMD
2.23 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Renovation Of Pm Shri Upgradation High School Bariyatu ,Block - Gola, Ramgarh

BOQ

Name of Work:- RENOVATION OF PM SHRI UPG HIGH SCHOOL BARIYATU ,BLOCK - GOLA, RAMGARH
Sl. No. Item Description
1CIVIL WORKS
2Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.
3Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
4Providing 12 mm thick cement plaster (1:6)with clean coarse sand of F.M 1.5--do- -do--complete job.
5Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
6Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
7Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
8Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
9Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.)
10Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification)
11Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
12Providing and laying 1mm thick white cement based wall putty--do--do--complete.
13Providing two coats of oil bound distemper of approved shade and make over old Surface-do-.
14Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
15Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
161:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mmnominal size)
17Labour for scrapping old paint with paint remover and below lamp as required on wooden or steel surface including cost of all labour and materials and scaffolding all complete as per building specification and direction of E/I.
18Providing 50mm thick 2nd class patent stone flooring (1:2:4) in floor……..do…do
19Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I.
20Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced……membrane: 3mm Thick
21Lettering with black Japan paint of approved brand and manufacture ( Writing Name of School)
22Carraige of Materials:-
23(A) Sand - (1+9) km
24(B) S/Chips - (1+19) km
25Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C
26Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor
27Circuit/submain wiring in PVC conduit
282X2.5 sq mm +1 x 2.5sq mm earth wire
292X4sq mm +1 x 4sq mm earth wire .
30Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution
3112way SPN double door.
32Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series
336/32amp Single pole
34Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit
356/32amp SPN
36Supplying and Fixing following size/modules, GI box along with modular base,cover plate….etc as required.
37S/F ceiling rose including connection etc.as reqd.
38S/F brass battan / angle holder including connection etc.as reqd.
39Supplying and fixing following Modular type
405/6 amps switch
415/6 amps socket outlet
42Electronic step type fan regulator, modular type
43ITC of ceiling fan
44S/F/F 1200 mm SWEEP CEILING FAN WITH REGULATOR
45S/F/F 15/16 W LED BULB
469'' EXHAUST FAN
47P/F 25mm x 5mm copper earth strip in surface/ recess :-
48Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc., as required.
49S/L 25 mm x 6 mm G.I. earth strip in ground :-
50Supplying and laying 25 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including soldering etc.
51P/F G.I. lightning conductor finial :-
52Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
53G.I. earth plate electrode :-
54Earthing with G.I. earth plate 600mm x 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.
55P/ F G.I. Lightning conductor tape in horizontal run :-
56Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (horizontal run).
57P/ F G.I. Lightning conductor tape in vertical run :-
58Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete etc. as required (vertical run).
59Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
60Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 1.1 KV etc as required.
613.5c x 95 sq.mm
6211 KV cable laying upto 120 sq.mm. in same trench :- Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
63E/W in excavation in foundation
64P/L of 60 mm thick Paver block
65Providing PCC (1:2:4)
66Carriage of materials -
67(A) Sand - (1+9) km
68(B) S/Chips - (1+19) km
69E/W IN EXCAVATION IN FOUNDATION
70E/W IN BACK FILLING
71PROVIDING SAND IN FILLING
72PROVIDING 75B, B/F/S
73PROVIDING PCC M20 IN FOUNDATION
74reinforced cement concrete work in beam suspended floor lintels band plinth with nominal mix of( 1:1.5:3)
75Brick work in foundation and plinth (1:4)..…d0…d0…..
76Providing tor steel reinforcement of 8mm ,10mm 12mm and 16mm…do……..do……
77Providing 12 mm thick cement plaster (1:3) and punning
78Structural steel work in single section, fixed with or without connecting plate,including……….all complete.
79Providing and fixing of galvanised iron profile sheet of 0.50 mm total coated thickness do…do…complete job.
80Providing and fixing UV stabilized fibreglass reinforced plastic sheet roofing upto any pitch.. do…do…complete job.
81Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating…….using self drilling/ self tapping screws complete :12.51.1 Ridges plain (500 - 600mm)
82Providing two coat of SE Paint with one coat of primer on steel surface…..E/I.
83Carriage of materials
84i) Bricks
85ii) Sand
86iii) S/Chips
87Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work
8815 mm nominal
8920 mm nominal
90Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal
91Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job 125 mm thick wall
92Providing and fixing gate valve of approved quality with complete job, 25 mm dia
93Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
94Providing and fixing PTMT bib cock of approved quality and colour.
95Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
96Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job , 580 mm long with 12.50 liter low level PVC Cistern
97S/F/F PVC S.W.R pipe (Supreme)
98110 mm
9975 mm
100PROVIDING URINAL FOR GENTS
101Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. Flexible pipe 32mm dia.
102Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
103Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion
104110x110x110mm Single tee without door
10575mm bend
106110 mm bend
107Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.
108110 mm
109E/W IN EXCAVATION IN FOUNDATION
110Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches.....do.
111PROVIDING SAND IN FILLING
112PROVIDING 75A, B/F/S
113Providing P.C.C M20 in foundation and plinth
114PROVIDING 50mm THICK PCC M20 IN DPC
115PROVIDING 75B, B/W(1:6) IN foundation and plinth
116PROVIDING 75 B, B/W(1:6) IN S & S
117Providing 125 mm th. 75A B/W (1:4) in S/S
118PROVIDING RCC M20 IN SLABS
119Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
120Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
121providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing -do-do- TMT Fe-500 (Only Valid for SAIL & TATA Steel)
1228mm (75%)
123Providing and laying rectified glazed ceramic floor tiles--do--do--complete job. 300x300mm Size
124Providing and laying 6 mm precast white glazed tiles in walls over 12 mm cemnt slurry -do-flush pointed
125Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.
126Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.
127CARRIAGE OF MATERIALS
128(A) Sand - (1+19) km
129(B) S/Chips - (1+29) km
130( C ) Bricks-(1+7)KM
131E/W IN EXCAVATION IN FOUNDATION
132E/W IN BACK FILLING
133Filling in foundation trenches and plinth in layers.. Obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I
134PROVIDING SAND IN FILLING
135PROVIDING 75B, B/F/S
136PROVIDING PCC M15 IN FOUNDATION
137PROVIDING RCC M20 IN FOOTINGS
138PROVIDING RCCM20 IN COLUMNS
139PROVIDING 75B, B/W(1:6) IN F & P
140PROVIDING 50mm THICK PCC M20 IN DPC
141PROVIDING 75B, B/W(1:6) IN S & S
142PROVIDING RCC M20 IN LINTEL BAND, BEAMS etc.
143PROVIDING TOR STEEL IN REINFORCEMENT
14410 mm
14512 - 20 mm
146COST OF Centering and shuttering for -Chhajja
147(5.3.17.20)ROOF
1485.3.17.21 TIE BEAM
1495.3.17.1 COLUMNS footing=2*27*(4.5+4)*1.0
1505.3.17.6 COLUMNS in S/S
1515.3.17.7 STAIR
152PROVIDING 6 mm CP(1:4) IN CEILING
153PROVIDING 12 mm CP(1:6) ON WALLS
154PROVIDING 12 mm CP(1:3) ON WALLS WITH 1.5 mm PUNNING ON OUTER WALL BETWEEN GL TO PL
155Finishing walls with acrylic smooth exterior paint
156Providing and applying white cement based putty of average thickness of 1mm
157PROVIDING 2- COAT OF OBD WITH ONE COAT OF PRIMER
158PROVIDING 16 mm DIA. FAN HOOKS
159PROVIDING m.s. sheet gate with chowkhat
160PROVIDING 20x6 mm m.s. grill
161PROVIDING 2- COAT OF SE PAINT WITH ONE COAT OF PRIMER ON STEEL SURFACE
162MAKING PLINTH PROTECTION
163Providing 50mm th. CC in flooring
164Lettering with Black japan paint
165CARRIAGE OF MATERIALS
166(A) Sand - (1+19) km
167(B) S/Chips - (1+29) km
168(C ) BRICKS - (1+7) KM
169Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 4382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes.
17075mm Diameter
171Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion
17275mm bend
173Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.
174110 mm
175Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C
176Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor
177Circuit/submain wiring in PVC conduit
1782X2.5 sq mm +1 x 2.5sq mm earth wire
1792X4sq mm +1 x 4sq mm earth wire .
180Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution
18112way SPN double door.
182Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series
1836/32amp Single pole
184Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit
1856/32amp SPN
186S/F ceiling rose including connection etc.as reqd.
187S/F brass battan / angle holder including connection etc.as reqd.
188Supplying and fixing following Modular type
1895/6 amps switch
1905/6 amps socket outlet
19115/16 amps switch
19215/16 amps socket outlet
193ITC of ceiling fan
194S/F/F 1200 mm SWEEP CEILING FAN WITH REGULATOR
195S/F/F 15/16 W LED BULB
196S/F/F 20 W LED STREET LIGHT
197Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
198Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
199E/W IN EXCAVATION IN FOUNDATION
200E/W IN BACK FILLING
201Filling in foundation trenches and plinth in layers... earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I
202PROVIDING SAND IN FILLING
203PROVIDING 75B, B/F/S
204PROVIDING PCC M15 IN FOUNDATION
205PROVIDING RCC M20 IN FOOTINGS
206PROVIDING RCCM20 IN COLUMNS
207PROVIDING 75B, B/W(1:6) IN F & P
208PROVIDING 25mm THICK PCC M20 IN DPC
209PROVIDING 75B, B/W(1:6) IN S & S
210PROVIDING RCC M20 IN LINTEL BAND, BEAMS etc.
211PROVIDING TOR STEEL IN REINFORCEMENT
21210 mm
21312 - 20 mm
214COST OF Centering and shuttering
2155.3.17.19 CHAJJA (including edges)
2165.3.17.20 ROOF SLAB
2175.3.17.21 TIE BEAM
2185.3.17.1 COLUMN FOOTING
2195.3.17.6 COLUMN
220PROVIDING 6 mm CP(1:4) IN CEILING
221PROVIDING 12 mm CP(1:6) ON WALLS
222PROVIDING 12 mm CP(1:3) ON WALLS WITH 1.5 mm PUNNING ON OUTER WALL BETWEEN GL TO PL
223PROVIDING PUTTY ON WALLS AND CEILING
224PROVIDING 2- COAT OF SNOWCEM WITH ONE COAT OF PRIMER
225PROVIDING 2- COAT OF OBD WITH ONE COAT OF PRIMER
226PROVIDING 16 mm DIA. FAN HOOKS
227PROVIDING m.s. sheet gate with chowkhat
228PROVIDING 20X6 MM MS GRILL
229PROVIDING 2- COAT OF SE PAINT WITH ONE COAT OF PRIMER ON STEEL SURFACE
230MAKING PLINTH PROTECTION
231PROVIDING 150 mm WIDE BRICK DRAIN
232Providing 50mm thick 2nd class patent stone flooring (1:2:4) in floor.
233Providing 125mm thick 75A B/W(1:4) in S/S
234PROVIDING PRECAST RCC SLAB
235PROVIDING 12 mm CP(1:4) WPCP
236CARRIAGE OF MATERIALS
237(A) Sand - (1+9) km
238(B) S/Chips - (1+19) km
239(C ) BRICKS - (1+7) KM
240Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work
24115 mm nominal
242Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal
243Providing and fixing gate valve of approved quality with complete job, 25 mm dia
244Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
245Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not lessthan 93 gms
246Supplying, fitting and fixing Kitchen sink…..required.Kitchen sink without drain board17.10.2.1 610x510 mm bowl depth 200 mm
247Providing and fixing male ended 15mm size C.P brass pillar cock (wt not less than 350gms) C.I body brass spndle pillar cock of approved quality as per specification and direction of E/I.
248b) C.I. body brass spindle
249S/F/F PVC S.W.R pipe (Supreme) - 75mm
250Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm drybrick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
251Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion
25275mm bend
253Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.
254Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C
255Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor
256Circuit/submain wiring in PVC conduit
2572X2.5 sq mm +1 x 2.5sq mm earth wire
2582X4sq mm +1 x 4sq mm earth wire .
259Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution
26012way SPN double door.
261Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series
2626/32amp Single pole
263Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit
2646/32amp SPN
265Supplying and Fixing following size/modules, GI box along with modular base,cover plate….etc as required.
266S/F ceiling rose including connection etc.as reqd.
267S/F brass battan / angle holder including connection etc.as reqd.
268Supplying and fixing following Modular type
2695/6 amps switch
2705/6 amps socket outlet
27115/16 amps switch
27215/16 amps socket outlet
273Electronic step type fan regulator, modular type
274ITC of ceiling fan
275S/F/F 1200 mm SWEEP CEILING FAN WITH REGULATOR
276S/F/F 15/16 W LED BULB
2779'' EXHAUST FAN
278300 mm dia. deep borewell - supplying all materials, labours, tools & equipments for drilling
279(a) from 0.00 m to 90.0 m
280(b) from 90.0m to 150.0m
281Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, 200 mm nominal size
282Development of tube well in accordance with IS : 2800 (part I) and IS: 11189,
283Providing and fixing suitable size threaded mild steel cap for borewell of 200mm dia
284Providing and fixing suitable size threaded mild steel clamp for borewell of 200mm dia
285Supplying 100 mm dis submersible pump set confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head……..upto 20 stages. 1.5 H.P.
286Supplying,fitting and fixing of standard make starter Panel Board with arrangement……all complete job as per direction of E/I.
287supplying, fitting and fixing 3 core 4 sq.mm flat copper submersible cable FINOLEX/HAVELLS make including……….etc. as per direction of E/I.
288Supplying, fitting and fixing lowering 40 mm dia CPVC Column pipe…do…do..all complete job as per direction of E/I.
289E/W in excavation in foundation
290P/L of 60 mm thick Paver block
291Providing PCC (1:2:4)
292Carriage of materials -
293(A) Sand - (1+9) km
294(B) S/Chips - (1+19) km
295GST @18%
296LABOURCESS @1% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57247843
AUTHORITY Local Bodies
TENDER VALUE 1.11 Crore
LAST DATE 03-09-2026
Authority
Authority Name Zilla Parishad
Work Description Tender for Renovation Of Pm Shri Upgradation High School Bariyatu ,Block - Gola, Ramgarh
Basic Detail
Tender No ZP/RAMGARH/08/2026-27
Bidding Type Tender
Location
City Ramgarh
State Jharkhand
Key Dates
Publish Date 27 Aug 2026
Submission Date 03 Sep 2026
Open Date 05 Sep 2026
Finance
Tender Value 1.11 Crore
Tender Fee 10000
EMD 2.23 Lakhs
Exemption Not Available
Document List
04SBDPMSHRIBARIYATU.pdf
9d52b929-3c0c-4b67-ad43-b97335ba2c77.html
BOQ_159538.xls
Tendernotice_1 (22).pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 27, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Sep 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
pdf

04SBDPMSHRIBARIYATU.pdf

html

9d52b929-3c0c-4b67-ad43-b97335ba2c77.html

xls

BOQ_159538.xls

pdf

Tendernotice_1 (22).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders