Tender For Renovation And Construction Of 4 Additional Class Room In Ss +2 High School Patratu, District- Ramgarh
Tender Value
72.67 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
4 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Construction Of 4 Additional Class Room In Ss +2 High School Patratu, District- Ramgarh
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 3 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 4 | Providing 12 mm thick cement plaster (1:6)with clean coarse sand of F.M 1.5--do- -do--complete job. |
| 5 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 6 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 7 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 8 | Providing and laying 1mm thick white cement based wall putty--do--do--complete. |
| 9 | Providing two coats of oil bound distemper of approved shade and make over old Surface-do-. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mmnominal size) |
| 12 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 13 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.- With commercial grade white |
| 14 | Lettering with black Japan paint of approved brand and manufacture ( Writing Name of School) |
| 15 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 16 | 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.9.120.1 30 mm thick plain PVC door shutters sqm 3182.959.120.2 30 mm thick pre laminated PVC door shutters sqm 3663.80 |
| 17 | ELECTRICAL WORKS |
| 18 | Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C |
| 19 | Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor |
| 20 | Circuit/submain wiring in PVC conduit |
| 21 | 2X2.5 sq mm +1 x 2.5sq mm earth wire |
| 22 | 2X4sq mm +1 x 4sq mm earth wire . |
| 23 | Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution |
| 24 | 12way SPN double door. |
| 25 | Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series |
| 26 | 6/32amp Single pole |
| 27 | S/F ceiling rose including connection etc.as reqd. |
| 28 | S/F brass battan / angle holder including connection etc.as reqd. |
| 29 | Supplying and fixing following Modular type |
| 30 | 5/6 amps switch |
| 31 | 5/6 amps socket outlet |
| 32 | S/F/F 15/16 W LED BULB |
| 33 | S/F/F 20 W LED STREET LIGHT |
| 34 | 12\\" (300mm) metal exhaust fan |
| 35 | ITC exhaust fan upto 450mm sweeo - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required. |
| 36 | S/F power plug point with modular type accessories :-Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 5/6 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings) |
| 37 | Sanitary & Water Supply Works |
| 38 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I. |
| 39 | 15 mm dia |
| 40 | Providing and fixing Gun metal full way valve of approved quality all complete as per specification and direction of E/I. |
| 41 | 25mm dia and weight not less than 500 gms. |
| 42 | Making holes in walls for laying G.I. pipe and restoring the same after pipe laying as per specification and direction of E/I. |
| 43 | 125 mm thick wall |
| 44 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. |
| 45 | Mirrors of 6mm thick glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror- (600 x 450mm) |
| 46 | C.P. brass towel rail 20mm x 600mm with bracket container |
| 47 | C.P. brass soap dish container medium quality with screw and hinges etc. |
| 48 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I. |
| 49 | 580mm long - With 10.0 liter low level PVC cistern |
| 50 | Supplying, fitting and fixing 40mm highb viterous white glazed earthen E.W.C. with 'P' trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fitting with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15mm PVC alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming all complete as per specification and direction of E/I. |
| 51 | With 'P' trap - 10 lit low level PVC Cistern |
| 52 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 53 | Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of exacavted earth within initial lead and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/I. |
| 54 | 50x 0.500 x 0.600 |
| 55 | Labour for alying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complet as per specification and direction of E/I.150mm |
| 56 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 57 | Supplying and fixing NP2 Hume pipe etc. (150mm dia) |
| 58 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 59 | 75 mm |
| 60 | 110 mm |
| 61 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 62 | Single tee with door - 75x75x75 mm |
| 63 | Single tee with door - 110x110x110 mm |
| 64 | Single tee without door - 75x75x75 mm |
| 65 | Single tee without door - 110x110x110 mm |
| 66 | Bend 87.5° - 75mm |
| 67 | Bend 87.5° - 110mm |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 69 | 25 mm nominal outer dia Pipes |
| 70 | 32 mm nominal outer dia Pipes |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge |
| 72 | 15 mm nominal outer dia Pipes |
| 73 | 20 mm nominal outer dia Pipes |
| 74 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 75 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5 |
| 76 | Special type C.P. Bath room Fitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) |
| 77 | Pillar cock (Long neck) |
| 78 | Bib cock (2 Way) |
| 79 | PAVER BLOCK |
| 80 | E/W in excavation in foundation |
| 81 | P/L of 60 mm thick Paver block |
| 82 | Providing PCC (1:2:4) |
| 83 | E/W IN EXCAVATION IN FOUNDATION |
| 84 | E/W IN BACK FILLING |
| 85 | Filling in foundation trenches and plinth in layers.. Obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I |
| 86 | PROVIDING SAND IN FILLING |
| 87 | PROVIDING 75B, B/F/S |
| 88 | PROVIDING PCC M15 IN FOUNDATION |
| 89 | PROVIDING RCC M20 IN FOOTINGS |
| 90 | PROVIDING RCCM20 IN COLUMNS |
| 91 | PROVIDING 75B, B/W(1:6) IN F & P |
| 92 | PROVIDING 50mm THICK PCC M20 IN DPC |
| 93 | PROVIDING 75B, B/W(1:6) IN S & S |
| 94 | PROVIDING RCC M20 IN LINTEL BAND, BEAMS etc. |
| 95 | PROVIDING TOR STEEL IN REINFORCEMENT |
| 96 | 10 mm |
| 97 | 12 - 20 mm |
| 98 | COST OF Centering and shuttering |
| 99 | chajja |
| 100 | tie beam/wall beam |
| 101 | column footing |
| 102 | column s/s |
| 103 | waist slab |
| 104 | PROVIDING 6 mm CP(1:4) IN CEILING |
| 105 | PROVIDING 12 mm CP(1:6) ON WALLS |
| 106 | PROVIDING 12 mm CP(1:3) ON WALLS WITH 1.5 mm PUNNING ON OUTER WALL BETWEEN GL TO PL |
| 107 | Finishing walls with acrylic smooth exterior paint |
| 108 | Providing and applying white cement based putty of average thickness of 1mm |
| 109 | PROVIDING 2- COAT OF OBD WITH ONE COAT OF PRIMER |
| 110 | PROVIDING 16 mm DIA. FAN HOOKS |
| 111 | PROVIDING m.s. sheet gate with chowkhat |
| 112 | PROVIDING 20x6 mm m.s. grill |
| 113 | PROVIDING 2- COAT OF SE PAINT WITH ONE COAT OF PRIMER ON STEEL SURFACE |
| 114 | MAKING PLINTH PROTECTION |
| 115 | Providing 50mm th. CC in flooring |
| 116 | Lettering with Black japan paint |
| 117 | CARRIAGE OF MATERIALS |
| 118 | (A) Sand - |
| 119 | (B) S/Chips - |
| 120 | (C ) BRICKS - |
| 121 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 4382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes. |
| 122 | 75mm Diameter |
| 123 | Providing and fixing on wall face unplasticised Rigid PVC moulded fitting/accessores for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382leaving 10 mm gap for thermal expansion |
| 124 | 75mm bend |
| 125 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. |
| 126 | 110 mm |
| 127 | ELECTRICAL WORKS |
| 128 | Wiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FR PVC Modular type GROUP - C |
| 129 | Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor |
| 130 | Circuit/submain wiring in PVC conduit |
| 131 | 2X2.5 sq mm +1 x 2.5sq mm earth wire |
| 132 | 2X4sq mm +1 x 4sq mm earth wire . |
| 133 | Supplying and fixing of following way single pole & neutral, sheet steel , MCB distribution |
| 134 | 12way SPN double door. |
| 135 | Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'B' series |
| 136 | 6/32amp Single pole |
| 137 | Supplying and fixing 5 amps to 32 amps, rating, 240 volts, 'C' series, maniature circuit |
| 138 | 6/32amp SPN |
| 139 | S/F ceiling rose including connection etc.as reqd. |
| 140 | S/F brass battan / angle holder including connection etc.as reqd. |
| 141 | Supplying and fixing following Modular type |
| 142 | 5/6 amps switch |
| 143 | 5/6 amps socket outlet |
| 144 | 15/16 amps switch |
| 145 | 15/16 amps socket outlet |
| 146 | ITC of ceiling fan |
| 147 | S/F/F 1200 mm SWEEP CEILING FAN WITH REGULATOR |
| 148 | S/F/F 15/16 W LED BULB |
| 149 | S/F/F 20 W LED STREET LIGHT |
| 150 | GST @18% |
| 151 | LABOURCESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender