Tender For Construction Of 10 Beded Phc Building(Single Storied) Including Ten(10) Nos Staff Quarter (Type-I 4 Nos, Type-Ii 4 Nos And Type-Iii 2 Nos) Kitchen, Morgue, Garage And Generator With Driver Room In Place Of Existing Kamalnagar Phc/Sh: Const
Tender Value
54.48 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
2 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 10 Beded Phc Building(Single Storied) Including Ten(10) Nos Staff Quarter (Type-I 4 Nos, Type-Ii 4 Nos And Type-Iii 2 Nos) Kitchen, Morgue, Garage And Generator With Driver Room In Place Of Existing Kamalnagar Phc/Sh: Construction Of Generator, Garage Cum Driver Room Including Site Development At Kamalnagar Phc Complex, Boxanagar, Sonamura, Sepahijala District, Tripura(Building Portion Including Internal Water Supply And Sanitary Installation)./Balance Work.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 5 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/Lindane emulsifiable concentrate of 20% |
| 6 | Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment as per IS: 6313 (Part III)- Latest revision (excluding the cost of chemical emulsion): Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level |
| 8 | 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 9 | 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 10 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Centering shuttering including struttings, proppingetc. and removal of form work for:Foundations, footings, bases for columns. |
| 12 | Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 13 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement--All work upto plinth level:1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size) |
| 16 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 17 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D ormore |
| 18 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 19 | Foundations, footings, bases for columns etc. for massconcrete with timber plank |
| 20 | Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply |
| 21 | Lintels, beams, plinth beams, girders, bressumers andcantilevers with shuttering ply |
| 22 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 23 | Edges of slabs and breaks in floors and walls under 20cm. wide |
| 24 | Weather shade, Chajjas, corbels etc., including edges. |
| 25 | First class brick work in foundation and plinthincluding cost of all materials as required complete:- |
| 26 | In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 27 | In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 28 | First class brick work in superstructure above plinthlevel & upto floor-five level including cost of allmaterials as required complete:- In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
| 29 | Half brick masonry work with first class bricks insuperstructure upto floor five level including cost ofall materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 30 | Extra for providing & placing in position 2 nos 6mmdia MS bars at every 4th course of half brick masonrywork including anchorage in joints of 75mm in eachside in superstructure for all level including cost ofall materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 31 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :Local Teak Wood |
| 32 | Providing and fixing ISI marked flush door shuttersconforming to IS: 2202 (Part I) non-decorative type,core of block board construction with frame of 1stclass hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and faceveeners on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws |
| 33 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square orround bars etc. all complete. Fixed to openings /wooden frames with rawl plugsscrews etc. |
| 34 | Providing 40 × 5 mm flat iron hold fast 40 cm longincluding fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cementconcrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3fine sand : 6 graded stone aggregate 20mm nominalsize) |
| 35 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 36 | 300x16 mm |
| 37 | 250x16 mm |
| 38 | Providing and fixing aluminium tower bolts ISImarked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 39 | 300x10 mm |
| 40 | 250x10 mm |
| 41 | Providing and fixing aluminium handles ISI markedanodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colouror shade with necessary screws etc. complete :125 mm |
| 42 | Providing and fixing aluminium hanging floor doorstopper ISI marked anodised (anodic coating not lessthan grade AC 10 as per IS : 1868) transparent or dyedto required colour and shade with necessary screwsetc. complete. Single rubber stopper |
| 43 | Providing and fixing factory made door frame (singlerebate) made of solid PVC foam profile withhomogenous fine cellular structure having smoothouter integral skin having 60mm width & 30mmthickness and shall be fixed to wall as per instructionsof Engineer-In-Charge using 100x8 sheet metal CSKscrews. |
| 44 | Providing and fixing 28 mm thick door shutter madeof solid PVC foam profile with homogenous finecellular structure having smooth outer integral skinhaving 71mm width & 28mm thick as vertical &horizontal styles. Joints are made using solventadhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frameinsert & telescopic polymeric ‘L’ corners .The panelshall be filled with 3mm thick high - pressure compactlaminate as per manufacturer’s specifications anddirections of the Engineer-in-charge, cover mouldingshall be provided for covering fixing screws andelegant look.( for W.C. bathroom door shutter). |
| 45 | Providing 50 × 50 × 50 mm Gamair wood plugsincluding cutting brick work and fixing in cementmortar 1:3 (1 cement: 3 fine sand) and making goodthe walls etc. |
| 46 | Providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2mm at 100 mm centre tocentre and braced with flat iron diagonals 20x5mm sizewith top and bottom rail of T-iron 40x40x6mm with40mm dia. steel pulleys & with riveted bolts, nuts,locking arrangement, stoppers, handles, hold fast/anchor bolt including embedding in cement concrete ofrequired grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required. |
| 47 | Providing and fixing fan clamp type-I of 16 mm dia M.S.bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. |
| 48 | Supplying and fixing rolling shutters of approved make,made of required size M.S. laths interlocked togetherthrough their entire length and jointed together at theend by end locks mounted on specially designed pipeshaft with brackets, side guides and arrangements forinside and outside locking with push and pull operationcomplete including the cost of providing and fixingnecessary 275mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cementconcrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:- |
| 49 | Providing and fixing aluminium work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up ofgaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction ofEngineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :- |
| 50 | For fixed portion of approved quality:- Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 51 | For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and makingprovision for fixing fittings wherever required includingthe cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately ):- Anodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15). |
| 52 | Providing and fixing glazing of approved quality inaluminium doors, windows, ventilator, shutters andpartition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the directionof Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
| 53 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineerin- charge.40mm thick. |
| 54 | Providing and laying 1st class quality vitrified floor tilesin different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge.. i) Double charged Stainfree vitrified tiles (Glossy) Size of tile 600 mm x 600 mm |
| 55 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge.450 mm X 300 mm in all shades and design |
| 56 | Providing and laying 1st class quality ceramic floor tilesin different sizes (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622 -2017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cementmortar 1:4 (1 cement : 4 fine sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the jointswith white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge. Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles. 600 mm x 600 mm in all shades and designs 1st classquality ceramic floor Porcelain tiles |
| 57 | Providing and fixing Precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning etc. all complete as per direction of Engineer-in-charge. In dark shade using ordinary cement |
| 58 | 80 mm thick factory made c.c. interlocking paver block of M-35 Grade.Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:(a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern. |
| 59 | Providing and fixing on wall face unplasticisedRigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge :Single socketed pipe - 110 mm OD |
| 60 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc. complete as per direction of Engineer-in-charge : |
| 61 | Coupler 110 mm |
| 62 | Single equal tee without door 110x110x110mm |
| 63 | Single equal tee with door 110x110x110mm |
| 64 | Bend 87.5° 110mm |
| 65 | Plain shoe 110mm |
| 66 | Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC rain waterpipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required lengthincluding cutting brick work and fixing with cementmortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete as per direction of Engineer-in-charge. 110mm |
| 67 | Providing and fixing to the inlet mouth of rain waterpipe PTMT grating with thickness of 8mm and weighingnot less than 100gm. etc. complete as per direction ofEngineer-in-charge. 100mm |
| 68 | 12 mm cement plaster of mix |
| 69 | Cement mortar 1:4 (1 cement : 4 fine sand) |
| 70 | Cement mortar 1:6 (1 cement : 6 fine sand) |
| 71 | 15 mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:6 (1 cement : 6 fine sand) |
| 72 | 6 mm cement plaster of mix :Cement mortar 1:3 (1 cement : 3 fine sand) |
| 73 | Neat cement punning. |
| 74 | Distempering with 1st quality acrylic distemper (readymixed) having VOC content less than 50 grams/ litre, ofapproved brand and manufacture to give an even shade [Payment shall be made after submission of TestCertificate issued by the Manufacturer] :New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 75 | Finishing walls with premium acrylic smooth exteriorpaint with Silicon additives of required shade ofapproved brand and manufacture [Payment shall bemade after submission of Test Certificate issued by theManufacturer] : New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 76 | Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 77 | With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ). |
| 78 | With ready mixed red oxide zinc chromate primer ofapproved brand and manufacture on steel galvanised iron/steel works |
| 79 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:Two or more coats on new work |
| 80 | Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with : |
| 81 | Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 82 | Cement mortar 1:4 (1cement : 4 fine sand) |
| 83 | Providing and fixing water closet squatting pan (Indiantype W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever) conformingto IS : 7231, with all fittings and fixtures completeincluding cutting and making good the walls and floorswherever required :White Vitreous china Orrisa pattern W.C. pan of size580x440 mm with integral type foot rests. |
| 84 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 85 | Providing and fixing white vitreous china flat back orwall corner type lipped front urinal basin of430x260x350mm and 340x410x265mm sizesrespectively. |
| 86 | Providing and fixing white vitreous china wash basinincluding making all connections but excluding the costof fittings:Flat back wash basin of size 550x400mm |
| 87 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 88 | Semi rigid pipe32 mm dia |
| 89 | Flexible pipe 32 mm dia |
| 90 | Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 91 | Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 92 | Providing and fixing PTMT liquid soap container 109mmwide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials withsnap fittings of approved quality and colours weighingnot less than 105 gms. |
| 93 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved qualityand colour.450mm long towel rail with total length of 495mm, 78mmwide and effective height of 88mm, weighing not less than 170gms. |
| 94 | Providing and fixing PTMT soap Dish Holder havinglength of 138mm, breadth 102mm, height of 75mmwith concealed fitting arrangements weighing notless than 106 gms. |
| 95 | Cutting chases in brick masonry walls for followingdiameter sand cast iron/centrifugally cast (spun) ironpipes and making good the same with cement concrete1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand): 100mmdia. |
| 96 | Providing and fixing on wall face unplasticised RigidPVC soil, waste & vent pipes (working pressure 6 kg /cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion:Single socketed pipe - 110 mm OD |
| 97 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 98 | Coupler110 mm |
| 99 | Single pushfit Coupler 110 mm |
| 100 | Single equal tee without door110x110x110mm |
| 101 | Single equal tee with door110x110x110mm |
| 102 | Double equal junction of required degree without door110x110x110 x110 mm |
| 103 | Double equal junction of required degree with door110x110x110 x110 mm |
| 104 | Bend 87.5°110mm |
| 105 | Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC soil, waste &vent pipes by means of 50x50x50mm hard woodplugs, screwed with M.S. screws of required lengthincluding cutting brick work and fixing with cementmortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.110mm |
| 106 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 107 | 15 mm nominal outer dia .Pipes. |
| 108 | 20 mm nominal outer dia .Pipes. |
| 109 | 25 mm nominal outer dia .Pipes. |
| 110 | 32 mm nominal outer dia .Pipes. |
| 111 | 40 mm nominal outer dia .Pipes. |
| 112 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. |
| 113 | 15 mm nominal outer dia .Pipes. |
| 114 | 20 mm nominal outer dia .Pipes. |
| 115 | 25 mm nominal outer dia .Pipes. |
| 116 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work |
| 117 | 15 mm nominal outer dia .Pipes |
| 118 | 20 mm nominal outer dia .Pipes. |
| 119 | 25 mm nominal outer dia .Pipes. |
| 120 | 32 mm nominal outer dia .Pipes. |
| 121 | 40 mm nominal outer dia .Pipes. |
| 122 | Providing and fixing brass bib cock of approvedquality :15 mm nominal bore |
| 123 | Providing and fixing brass stop cock of approvedquality : 15 mm nominal bore |
| 124 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 125 | 25 mm nominal bore |
| 126 | 40 mm nominal bore |
| 127 | Providing and fixing gun metal non-return valve of approved quality (screwed end): |
| 128 | 25 mm nominal bore. Vertical |
| 129 | 40 mm nominal bore. Vertical |
| 130 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 markedwith cover and suitable locking arrangement andmaking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support fortank. |
| 131 | Constructing masonry Chamber 30x30x50 cm, inside, in brick work in cement mortar 1:4 (1 cement :4fine sand) for stop cock, with C. I. surface box100x100 x75 mm (inside) with hinged cover fixedin cement concrete slab 1:2:4 mix (1 cement :2coarse sand : 4 graded stone aggregate 20 mmnominal size ) necessary excavation foundationconcrete 1:5:10 ( 1 cement :5 fine sand:10 gradedstone aggregate 40mm nominal size ) and insideplastering with cement mortar 1:3 (1 cement :3coarse sand) 12mm thick finished with a floatingcoat of neat cement complete as per standarddesign : With Second Class bricks |
| 132 | Providing and fixing C.P. brass shower rose with 15or 20 mm inlet:100 mm diameter |
| 133 | Providing, laying and jointing glazed stonewarepipes grade ‘A’ with stiff mixture of cementmortar in the of 1:1 (1 cement: 1 fine sand)including testing of joints etc. complete :150 mm diameter |
| 134 | Providing and laying cement concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate40 mm nominal size) alround S.W. pipesincluding bed concrete as per standard design:150 mm diameter S. W. pipes |
| 135 | Making soak pit 2.5 m diameter 3.0 metre deepwith 45 x 45 cm dry brick honey comb shaftwith well burnt 2nd class bricks and S.W. drainpipe 100 mm diameter, 1.8 m long complete asper standard design. |
| 136 | Constructing brick masonry chamber forunderground C.I. inspection chamber and bendswith 1st class bricks in cement mortar 1:4 (1cement : 4 fine sand) C.I. cover with frame (lightduty) 455x610 mm internal dimensions, totalweight of cover with frame to be not less than38 kg (weight of cover 23 kg and weight offrame 15 kg) R.C.C. top slab with 1:2:4 mix (1cement :2 fine sand : 4 graded stone aggregate20 mm nominal size) foundation concrete 1:5:10(1 cement: 5 fine sand : 10 graded stoneaggregate 40 mm nominal size), inside plastering12 mm thick with cement mortar 1:3 (1 cement:3 fine sand) finished smooth with a floating coatof neat cement on walls and bed concrete etc.complete as per standard design :Inside dimensions 600x 850 mm and 45 cm deepfor pipe line with three or more inlets : Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender