Tender For maintenance Of M.I Schemes Under W.R. Sub-Division Khowai During The Year 2026-27 / S.H:- Repairing Of Pump, Motor, Suction Delivery Line, Rewinding Etc. At Different M.I. Schemes Under Padmabil Block & Kmc Area. (Job No. Tr/22/Minor Works
Tender Value
6.34 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
6 days left
EMD
12692
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of M.I Schemes Under W.R. Sub-Division Khowai During The Year 2026-27 / S.H:- Repairing Of Pump, Motor, Suction Delivery Line, Rewinding Etc. At Different M.I. Schemes Under Padmabil Block & Kmc Area. (Job No. Tr/22/Minor Works/Wrd-I/2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Dismentaling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in-Charge. i) For LI. |
| 2 | Dismantaling of horizontal pump and motor of 20/25 HP from the base and carrying the pump set to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme and fitting fixing the pump set as before as per direction of the Engineer-in- charge. |
| 3 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge. |
| 4 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling.a) 6305 Ball bearing (TATA /SKF) |
| 5 | b) 6306 Ball bearing (TATA /SKF) |
| 6 | c) 6309 Ball bearing (TATA /SKF) |
| 7 | d) 6310 Ball bearing (TATA /SKF) |
| 8 | Providing & fitting fixing Shaft sleeve bush of approved quality.i) For LI(a) Cast iron (CI) |
| 9 | (b) Stainless Steel (SS) |
| 10 | Providing & fitting fixing Shaft sleeve nut of approved quality.(a) Cast iron (CI) |
| 11 | (b) Stainless Steel (SS) |
| 12 | Providing & fitting fixing C.I. gland of approved quality.i) For LI |
| 13 | Providing & fitting fixing Lantern Ring for pump of approved quality. |
| 14 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality.i) 150 mmφ |
| 15 | ii) 190 mmφ |
| 16 | Providing & fitting fixing coupling nuts & bolts (all Size)of approved quality.i) For LI |
| 17 | Providing & fitting fixing coupling rubber bush (All Size)of approved quality.i) For LI |
| 18 | Providing & fitting fixing coupling star bush (All Size) of approved quality.i) 150 mmφ |
| 19 | ii) 190 mmφ |
| 20 | Providing & fitting fixing Pump Shaft of approved quality. |
| 21 | Supplying and fitting fixing of pump cooling pipe of best quality as per direciton of Engineer-in-charge. |
| 22 | Providing & fitting fixing Casing ring of approved quality.a) 150 mm diai) 8 mm thick |
| 23 | Providing & fitting fixing Gland nut / Stag nut 100 mm long for gland of approved quality.i) For LI |
| 24 | Providing & fitting fixing coupling/ impeller Key of approved quality.i) Stainless Steel |
| 25 | Providing and fitting fixing of brass fullway valve with handle in G.I pipe line including cutting, threading etc. complete as per CPWD specification and direction of the Engineer-in-charge(a) 40 mm dia |
| 26 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-chargei) 6 to 8 mm thick |
| 27 | ii) 10 to 12 mm thick |
| 28 | Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge. |
| 29 | Supplying & fitting fixing of spare parts for 20/25 HP Horizontal motor.i) Motor fan |
| 30 | ii) Terminal plate |
| 31 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. Internal work - Exposed on wall.(a) 40 mm dia |
| 32 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.i) 125/150 mm dia |
| 33 | Labour charge for laying of G.I pipe conforming IS 1161,3589 & 1239 including fitting fixing complete as per direction of Engineer-in- Charge.a)150 mm dia nominal bore (medium) |
| 34 | b)125 mm dia nominal bore (medium) |
| 35 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc.complete as per CPWD specification and direction of the Engineer - in - charge.a)External work. i) 125 mm nominal bore. |
| 36 | ii) 150 mm nominal bore. |
| 37 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.i) 125/150 mm dia |
| 38 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. |
| 39 | Welding by gas or electric plant including transportation of plant at site etc. complete as per standard design. |
| 40 | Supplying & fitting fixing of GI . Bend/elbow in the pipe line in/c testing of joints complete as per CPWD specification and direction of the Engineer-in-charge.(a) 125 mm dia |
| 41 | (b) 150 mm dia |
| 42 | Providing & fitting fixing of MS flange ( 8 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge.(a) 125 mm dia |
| 43 | (b) 150 mm dia |
| 44 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.(a) 125 mm dia |
| 45 | (b) 150 mm dia |
| 46 | Providing and fixing MS bolts including nuts and washers complete as per standard design:i) Upto 300mm length. |
| 47 | Providing and fitting fixing M.S. clamp for hose pipes with nuts & bolts complete as per relevant IS specification and direction of Engineer-in-charge(a) 150 mm dia |
| 48 | Providing & fitting fixing MS foot valve as per relevant IS specification and the direction of Engineer-in-charge.(a) 150 mm dia |
| 49 | Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.(a) 150 mm dia |
| 50 | Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) C.I foot valve weight |
| 51 | b) C.I foot valve ring |
| 52 | c) C.I foot valve net |
| 53 | Providing & fitting fixing C.I tail piece of approved quality at site of work.(a) 150 mm dia |
| 54 | Providing and fitting fixing PVC suction hose pipes of wall thickness 6 mm. as per relevant IS specification and direction of Engineer-in-charge.(a) 150 mm dia |
| 55 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.i) 20 HP |
| 56 | ii) 25 - 30 HP |
| 57 | Labour charge of lifting of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block as per direction of the Engineer-in-charge. |
| 58 | Labour charge for lowering & fifting fixing of 5,000 to 20,000 GPHwater lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of the Engineer-in-charge. |
| 59 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783- 1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of motor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 60 | Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 7500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783- 1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 61 | Labour charge for dismentalling and overhauling of 5,000 to 20,000 GPH water lubricated vertical submesible pump after taking out shaft etc. including necessary fittings of new & existing submersible materials as per direction of the Engineer-in-charge. |
| 62 | Supplying & fitting fixing of spare parts for submersible pump 5 HP to 25 HP of approved quality as per direction of Engineer-in-Charge.a) Impeller of brass make |
| 63 | b) Motor bush (Brass make) |
| 64 | c) Sand guard |
| 65 | d) Thrust bearing with plate |
| 66 | e) Pump bush (Brass make) |
| 67 | f) Safety clamp |
| 68 | g) Pump Shaft |
| 69 | h) Pump Stainless steel sleeve |
| 70 | i) Pump Coupling |
| 71 | j) Pump neck ring |
| 72 | k) Pump column nut |
| 73 | l) Impeller key |
| 74 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-chargei) 4.0 sqmm |
| 75 | Supplying & fitting fixing manually operated oil immerged starter of approved quality.a) 30 Hp Osco/BCH Make |
| 76 | Repairing of OSCO starter including supplying & fixing of necessary spare parts as per direction of Engg.- In - Charge.i) Stand finger |
| 77 | ii) Gola finger |
| 78 | iii) CT Coil |
| 79 | iv) Magnet Coil |
| 80 | Supplying & filling of Transformer Oil in the oil tank of manually operated oil immerged starter of approved quality. |
| 81 | Supplying & fitting fixing power capacitor (ISI Marked) of approved quality.i) 12.5 KVAr power capacitor |
| 82 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.i) 25 HP/18.5 kw Relay range within 13-21 + 10% |
| 83 | Supplying and fitting fixing of Thermal overload Relay, relay range 20-32, & 28-42, directly operated suitable for Fully Automatic Star Delta type Motor startar L&T ,BCH, Havells make as per direction of Engineer-in-Charge. |
| 84 | Supplying and fitting fixing of thermal timer type GT 200 ( 230/250 V, 360 V, 400/440 V, 500 V, 50 Hz for 5-18 secs range) suitable for Fully Automatic Star Delta type Motor startar L&T ,BCH, Havells make as per direction of Engineer-in-Charge. |
| 85 | Supplying and fitting fixing of 3 pole power conductors of different type, range from 25-300 AC-3 suitable for Fully Automatic Star Delta type Motor startar L&T , BCH, Havells make as per direction of Engineer-in-Charge.i) Type ML2.0 |
| 86 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineerin- charge.i) 63 amps |
| 87 | ii) 200 Amps. |
| 88 | Providing & fixing 200 Amps busbar of size 600X 450X100 mm with 4 nos. copper strip of size 450X40X4 mm of approved quality. |
| 89 | Providing and installation of Copper Strips of 200 Amps busbar by replacing the damaged one with necessary nuts and bolts etc. as per direction of Engg.- In - Charge |
| 90 | Supplying & fitting fixing kit cut for main & sub-main swich (Male & female) as per direction of the Engineer in Charge.a) 63 Amps main switch |
| 91 | b) 200 Amps main switch |
| 92 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.i) 7/16 Copper Wire |
| 93 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 94 | Providing and fitting fixing of moving iron type, Range 0- 100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 95 | Dismentling of pannel board by disconnection of all electrical equipments & stacking of materials & return the same to Sub- Divisional store as per direction of the Engineer-in-charge |
| 96 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting 1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge.i) Size 1.80 X 1.20 X 0.025 mtr |
| 97 | Labour charge for reinstallation of all electrical equipments (dismentalled serviceable materials, if any additional/ replacement of electrical equipments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender