Tender For Road Development Works Under Bishramganj Sub-Division, Pwd (R&B) During The Year 2026-27 (I) From Merusadhupara Ward No 1( Atindra Debbarma House) To Ward No 4 (House Of Ashit Debbarma) Via House Of Pradip Debbarma (L=4.50 Km) (Ii) From La
Tender Value
1.10 Crore
Estimated cost
Bid Submission
03 Sep 2026
2 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Development Works Under Bishramganj Sub-Division, Pwd (R&B) During The Year 2026-27 (I) From Merusadhupara Ward No 1( Atindra Debbarma House) To Ward No 4 (House Of Ashit Debbarma) Via House Of Pradip Debbarma (L=4.50 Km) (Ii) From Lalsingmura Gp To Manipuri Basti (H/O- Gulabi Singh)(L= 0.55 Km) (Iii) From Dhakarbari Pwd Road To North Brajapur No.1 anganwadi center (L=1.00 Km) (Iv) From Rangapania Bazar To Ramcherra Mill (L= 0.70 Km) / Sh: Grouting, Patch Soling, Wbm 3, Pmc, Brick Masonry Wall And Cd, Paver Block Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying flat brick soling layer on prepared sub-grade according to lines, grades and crosss-section shown on the drawing filling joints with Earth free from clay with a plasticity index not exceeding 6, watering and rolling the same with three wheeled roller 80-100 KN as per MoRD technical specification clauses 412. |
| 2 | Providing and laying brick edging laid length wise on prepared sub-grade according to lines, grades and cross - section shown on the drawing, filling joints with earth, free clay with a plasticity index not exeeeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical specification clause 412 |
| 3 | WBM Grading - 3 : Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405.: (i) By Manual Means |
| 4 | Clearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Technical Specification clause 201:- By Manual Means:- (i) In area of non-thorny jungle. |
| 5 | Earthwork in excavation for structures as per drawings and MoRD technical specifications clauses 305.1 including setting out,construction of shoring & bracing ,removal of stumps & deleterious material and disposal up to a lead of 50 m ,dressing of sides & bottom and backfiling in trenches with excavated suitable material :- Ordinary soil upto 3 m depth (A) Without dewatering . |
| 6 | Filling in foundation trenches as per drawing & MoRD technical specification clause 305.3.9 ,1200 :- (A) Sand filling. |
| 7 | Providing concrete for plain concrete (using jhama brickaggregate) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement) P.C.C grade M 10 (using jhama brick aggregate) (i) Nominal mix 1:3:6 |
| 8 | Construction of toe walls for protection of slopes as per Drawing and MoRD technical specifications Clause 1302.5 (including centering, shuttering staging etc. but excluding reinforcement) Brick masonry in cement mortar 1:4 in case of brick pitching |
| 9 | Plastering with cement mortar (1:4)12 mm thick on brick work/CC work in/c finishing coat of neat cement punning with 2.75 kg per sq.m. in sub structure as per MoRD technical specification cl 613.4 and 1204. |
| 10 | Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). RCC M25 upto 5 m height |
| 11 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202. |
| 12 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site , spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MoRD Technical Specification Clause 303.1. |
| 13 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MoRD Technical Specification Clause 503. |
| 14 | 25mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade/ modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 25 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80- 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508. Case - II By Mechanical Means(I) Bitumen of VG-30 |
| 15 | Seal Coat: Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510- A By Manual Means: Case - IV : Type D (premix with fine sand)- (I) Bitumen of VG-30 |
| 16 | Providing weep holes in brick masonry/ stone masonry, plain/ reinforcedconcrete abutment,wingwall, returnwall with 100 mmdia AC pipe or uPVCpipe(110 mm OD of 6.0 kg/cm2 pressure) extending through the full width of the structures with slope of 1(V): 20(H) towards drawing face complete as drawing and MoRD technical specification clauses 614, 709, 1204.3.7. |
| 17 | Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with 75 mm B.M, after applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 18 | 80 mm thick factory made c.c. interlocking paver block of M-35 Grade: Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:(a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender