Tender For maintenance Of Differents Road Under The Juridiction Of Pwd(R&B) Karbook Sub-Division During The Year 2026-27/Sh:-Flat Bick Soling ,Wbm, Re-Carpeting, Sand Seal Coating Etc.
Tender Value
24.11 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
2 days left
EMD
48228
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of Differents Road Under The Juridiction Of Pwd(R&B) Karbook Sub-Division During The Year 2026-27/Sh:-Flat Bick Soling ,Wbm, Re-Carpeting, Sand Seal Coating Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Removal of unsuitable soil with disposal upto 1000 m Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment / subgrade, replacement by suitable soil, which shall be paid separately as per MoRD Technical Specification Clause 303.5.2 and as per MoRD Technical Specification Clause 302.2.11. |
| 2 | Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412 |
| 3 | Water Bound Macadam Sub-base/base Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water boundmacadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading- 3 as per MoRD Technical Specification Clause 405. 2) WBM Grading -3 A) By Manual Means |
| 4 | Tack Coat Using hot straight run bitumen of grade VG - 30 on bituminous surface. Providing and applying tack coat with Using hot straight run bitumen of grade VG - 30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specification on Bituminous surface @ 0.50 kg/Sqm. |
| 5 | 20 mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade/ modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 25 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508 Case - I By Manual Means (I) Bitumen of VG-30 |
| 6 | Seal Coat:Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.A. By Manual Means, Case - IV : Type D (premix with fine sand) (I) Bitumen of VG-30 |
| 7 | Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minmum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 8 | (i) Surface Drains in Soil:Construction of unlined surface drains of average crosssectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307. |
| 9 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD TechnicalSpecification Clause 301.5. |
| 10 | Single bamboo palasiding / walling of whole 2nd class bamboo (Jati or Bethua) 65 to 75 mm dia and closely packed & driven @ 150 mm c/c including fitting fixing with half bamboo kamis hosizontally in three rows with can or tying with wire complete and struts 1.5 m apart longitudinally and providing Bitumen drum sheet walling fixed with nail as per drawing and MoRD technical specification Clause 1302.5 Driven at least. (A) 900 mm below ground and 1200 mm above ground on average. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender