Tender For Repair & Maintenance Of Type-Iii Quarter At Nogli (Sh:- Distempering, Painting, Steel Work, providing and laying Tiles & Sanitary Works At P-71).
Tender Value
1.89 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
5 days left
EMD
3800
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Type-Iii Quarter At Nogli (Sh:- Distempering, Painting, Steel Work, providing and laying Tiles & Sanitary Works At P-71).
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 3 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 4 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 5 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 6 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 7 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): : 18 mm thick carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 8 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 9 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 10 | Providing and fixing G.I. pipes complete with G.I. Fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 11 | Providing and fixing a) Gate wall carriage of mateiral with in all leads and lifts and other as per the direction of the Engineer-in-charge. |
| 12 | b) Socket |
| 13 | c) Union |
| 14 | b) Boul |
| 15 | b) Tee |
| 16 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works incluiding carrage of material with in all leads and lifts and other and as per the direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender