Tender For annual repair & maintenance of Rest House At Jubbal In Tehsil Jubbal District Shimla Hp (Sh:- Construction Of Roof In Outer Area Of Vip Room, Providing And Fixing Door , W.C. , Pelment , Repair Of Dining Table ,Painting And Distempring Etc
Tender Value
7.09 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
3 days left
EMD
14200
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Rest House At Jubbal In Tehsil Jubbal District Shimla Hp (Sh:- Construction Of Roof In Outer Area Of Vip Room, Providing And Fixing Door , W.C. , Pelment , Repair Of Dining Table ,Painting And Distempring Etc )
BOQ
| Sl. No. | Item Description |
| 1 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 2 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 3 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board as per IS: 14862 |
| 4 | Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x40 mmx40 mmon both inner side of pelmet and rawl plugs 75 mm long etc. all complete. |
| 5 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 6 | Providing wood work in frames of doors, windows, clerestorywindowsandother frames, wrought framed and fixed inpositionwithhold fast lugsor withdash fastenersof requireddia& length ( hold fast lugsor dash fastener shall be paid for separately).Second class teak wood |
| 7 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixingwithbutt hingesof required size with necessary screws, excluding panelling which will be paid for separately,all completeasperdirectionofEngineer-in charge. Second class teak wood 35 mm thick shutters |
| 8 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood 35 mm thick shutters |
| 9 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. |
| 10 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50 x 20 mm |
| 11 | Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 25 mm thick. |
| 12 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 1)150x10 m |
| 13 | 2)250x10 mm |
| 14 | Providing and fixing bright finished brass handles with screws etc. complete: 1)100 mm |
| 15 | 2)125 mm |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 1) 100x58x1.90 mm |
| 18 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 20 | Providingand fixing controlled flush, low level cistern made of vitreous china with all fittings complete10 litre (full flush) capacity-white |
| 21 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 22 | Providing and fixingG.I. inlet connection for flushpipe connecting with W.C. pan. |
| 23 | Providing and fixing 8mmdiaC.P. /S.S.Jet with flexible tube upto 1metre longwithS.S. triangular plate to Eureopean type W.C.of quality and make as approved by Engineer - in - charge. |
| 24 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.meters and under, including cutting the patch in propers hape, rakingout jointsand preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement : 4 fine sand) |
| 25 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 26 | Removing dry or oil bound distemper, water proofing cement paint and the likebyscrapping, sandpapering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 27 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete up-to all lead and lifts |
| 28 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) |
| 29 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 13.85.3 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 30 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 13.48.2 13.48.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 31 | Carriage of Excavated Material / debries to Dumping site as per muck management plan including Loading unloading staking etc by machanical Transport including Carriage of Material within all lead and lifts as per Direction of Engineer -in -Charge upto 10 to 20 km |
| 32 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 33 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 800x800 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender