Tender For Tender For Replacement Of Over Head Conductor With Lt Ab Cable From 63Kva Dtr Jana-I, Lt Extension To Loh From Existing 25Kva Dtr Dhama-Ii, Dhama-Ii, 63Kva Dtr Janafall And 63Kva Archhandi-Ii In E Section Larankelo Uesd, Hpsebl, Naggar On
Tender Value
2.33 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
2 days left
EMD
2340
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Replacement Of Over Head Conductor With Lt Ab Cable From 63Kva Dtr Jana-I, Lt Extension To Loh From Existing 25Kva Dtr Dhama-Ii, Dhama-Ii, 63Kva Dtr Janafall And 63Kva Archhandi-Ii In E Section Larankelo Uesd, Hpsebl, Naggar On Turnkey Basis Against Bid Specification No. Hpsebl/Edm/Nit-20/2026-27 Estimated Cost: Rs. 2,33,631/-Only Emd: Rs.2,340/-Only.
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Sr. Executive Engineer, Electrical Division, HPSEBL, Manali. Name of Work:- Tender for replacement of over head conductor with LT AB cable from 63KVA DTR Jana-I, LT extension to LOH from existing 25KVA DTR Dhama-II, Dhama-II, 63KVA DTR Janafall and 63KVA Archhandi-II in “E” Section LaranKelo UESD, HPSEBL, Naggar on Turnkey Basis against Bid Specification No. HPSEBL/EDM/NIT-20/2026-27 Estimated Cost: Rs. 2,33,631/-Only EMD: Rs.2,340/-only. Contract No: Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate (Supply, Erection, Testing and commissioning etc. Including Mechanical Transportation and manual carriage, labour cess complete package) inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Replacement of overhead conductor with AB cable from existing 63KVA DTR Jana-I(TS 17/2025-26) |
| 3 | Poles, Lt cable, CABLE ACCESSIORIES & Conductor:- |
| 4 | Supply of Steel tubular pole 9 Mtr. Long ( pole will be supply by HPSEBL) |
| 5 | Supply of LT AB cable 3x70+70+16mm2 (cable will be supply by HPSEBL) |
| 6 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any including cement concrete filling 1:3:6 (1 cement:3 sand: 6 aggrigate 20 mm nominal size) |
| 7 | Assembly for LT Cable:- |
| 8 | Supply of Anchoring assembly |
| 9 | Supply of suspension assembly |
| 10 | Supply of facade hooks |
| 11 | Stay Sets:- |
| 12 | Supply of Stay Set Suitable for LT made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 13 | Stay Wire:- |
| 14 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) |
| 15 | Earthing:- |
| 16 | Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size |
| 17 | Supply of Aluminium Paint & Red oxide for all poles and steel fitting |
| 18 | eRECTION:- |
| 19 | Erection of LT steel tubular pole 9.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole, Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed) |
| 20 | Erection of LT AB cable 3x70x70+16 mm2 :- Laying of cable, installation of suspension and tension assembly etc., sagging of AB cable, kits cable jointing. |
| 21 | Dismantlement of existing ACSR conductor 6/1/2.59mm :- removal of conductor, De-stringing & rolling of condoctor |
| 22 | Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 23 | Mannual carriage :- ST pole, RCC muff, AB cable & allied material (Avg. Lead 1.000KM) |
| 24 | LT extension to LOH from existing 25KVA DTR Dhama-II (TS 88/2025-26) |
| 25 | Poles, Lt cable, CABLE ACCESSIORIES & Conductor:- |
| 26 | Supply of Steel tubular pole 9 Mtr. Long ( pole will be supply by HPSEBL) |
| 27 | Supply of ACSR conductor 6/1/2.59mm (30mm2) ( Condoctor will be supply by HPSEBL) |
| 28 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any including cement concrete filling 1:3:6 (1 cement:3 sand: 6 aggrigate 20 mm nominal size) |
| 29 | Insulators:- |
| 30 | Supply of shackle insulator (16kN) with D-iron |
| 31 | Stay Sets:- |
| 32 | Supply of Stay Set Suitable for LT made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 33 | Stay Wire:- |
| 34 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) |
| 35 | Supply of GI wire 8 SWG |
| 36 | Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size |
| 37 | Supply of Eye hook bolt (Earth knob) |
| 38 | Supply of Aluminium Paint & Red oxide for all poles and steel fitting |
| 39 | eRECTION:- |
| 40 | Erection of LT steel tubular pole 9.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole, Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed) |
| 41 | Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 42 | Laying , sagging of conductor & binding with insulator (30mm2) |
| 43 | Laying , sagging of GI wire & binding with insulator |
| 44 | Mannual carriage :- ST pole, RCC muff, conductor & allied material (Avg. Lead 1.000KM) |
| 45 | LT extension to LOH from existing 25KVA DTR Dhama-II (TS 107/2025-26) |
| 46 | Poles, Lt cable, CABLE ACCESSIORIES & Conductor:- |
| 47 | Supply of Steel tubular pole 9 Mtr. Long ( pole will be supply by HPSEBL) |
| 48 | Supply of ACSR conductor 6/1/2.59mm (30mm2) ( Condoctor will be supply by HPSEBL) |
| 49 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any including cement concrete filling 1:3:6 (1 cement:3 sand: 6 aggrigate 20 mm nominal size) |
| 50 | Insulators:- |
| 51 | Supply of shackle insulator (16kN) with D-iron |
| 52 | Stay Sets:- |
| 53 | Supply of Stay Set Suitable for LT made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 54 | Stay Wire:- |
| 55 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) |
| 56 | Supply of GI wire 8 SWG |
| 57 | Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size |
| 58 | Supply of Eye hook bolt (Earth knob) |
| 59 | Supply of Aluminium Paint & Red oxide for all poles and steel fitting |
| 60 | eRECTION:- |
| 61 | Erection of LT steel tubular pole 9.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole, Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed) |
| 62 | Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 63 | Laying , sagging of conductor & binding with insulator (30mm2) |
| 64 | Laying , sagging of GI wire & binding with insulator |
| 65 | Prov. LT extension from existing 63KVA DTR Janafall (TS 108/2025-26) |
| 66 | Poles, Lt cable, CABLE ACCESSIORIES & Conductor:- |
| 67 | Supply of Steel tubular pole 9 Mtr. Long ( pole will be supply by HPSEBL) |
| 68 | Supply of ACSR conductor 6/1/2.59mm (30mm2) ( Condoctor will be supply by HPSEBL) |
| 69 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any including cement concrete filling 1:3:6 (1 cement:3 sand: 6 aggrigate 20 mm nominal size) |
| 70 | Insulators:- |
| 71 | Supply of shackle insulator (16kN) with D-iron |
| 72 | Stay Sets:- |
| 73 | Supply of Stay Set Suitable for LT made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 74 | Stay Wire:- |
| 75 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) |
| 76 | Supply of GI wire 8 SWG |
| 77 | Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size |
| 78 | Supply of Eye hook bolt (Earth knob) |
| 79 | Supply of Aluminium Paint & Red oxide for all poles and steel fitting |
| 80 | eRECTION:- |
| 81 | Erection of LT steel tubular pole 9.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole, Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed) |
| 82 | Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 83 | Laying , sagging of conductor & binding with insulator (30mm2) |
| 84 | Laying , sagging of GI wire & binding with insulator |
| 85 | LT extension LOH from existing 63KVA DTR Archandi-II (TS 143/2025-26) |
| 86 | Poles, Lt cable, CABLE ACCESSIORIES & Conductor:- |
| 87 | Supply of Steel tubular pole 9 Mtr. Long ( pole will be supply by HPSEBL) |
| 88 | Supply of ACSR conductor 6/1/2.59mm (30mm2) ( Condoctor will be supply by HPSEBL) |
| 89 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any including cement concrete filling 1:3:6 (1 cement:3 sand: 6 aggrigate 20 mm nominal size) |
| 90 | Insulators:- |
| 91 | Supply of shackle insulator (16kN) with D-iron |
| 92 | Stay Sets:- |
| 93 | Supply of Stay Set Suitable for LT made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 94 | Stay Wire:- |
| 95 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG) |
| 96 | Supply of GI wire 8 SWG |
| 97 | Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size |
| 98 | Supply of Eye hook bolt (Earth knob) |
| 99 | Supply of Aluminium Paint & Red oxide for all poles and steel fitting |
| 100 | eRECTION:- |
| 101 | Erection of LT steel tubular pole 9.00 Mtr. Long (Single pole) digging of pit, Drilling of holes in X-Bracing set X-arm, Erection of pole, Fixing of insulator X-arm X-bracing set, Fixsing of all types of Clamps, Filling of pit+ramming & painting of pole (Punching of the poles is stricitly not allowed) |
| 102 | Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 103 | Laying , sagging of conductor & binding with insulator (30mm2) |
| 104 | Laying , sagging of GI wire & binding with insulator Total in Figures 233631.41 233631.0 INR Two Lakh Thirty Three Thousand Six Hundred & Thirty One Only 207.0 22.2525 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender