Tender For Provision For Construction Of Positive Suction Pump House & Ancilary Works At 9 Mld Wtp, Belgadia Under Watco Division Baripada.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Sep 2026
10 days left
EMD
56000
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision For Construction Of Positive Suction Pump House & Ancilary Works At 9 Mld Wtp, Belgadia Under Watco Division Baripada.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all labour and T&P for earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 2 | 1st depth |
| 3 | 2nd depth |
| 4 | 3rd depth |
| 5 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 6 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete . |
| 7 | Sunken pump house base |
| 8 | Supplying all labour , T&P and removing surplus earth /debrise by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 9 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in super structure |
| 10 | In foundation and plinth |
| 11 | in superstructure |
| 12 | R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete . |
| 13 | Sunken pump house raft base ( at 3.50 mtr below GL) |
| 14 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. |
| 15 | R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc. |
| 16 | R.C.C. Walls and Fins |
| 17 | RCC columns & beams |
| 18 | RCC walkway slabs |
| 19 | RCC beams |
| 20 | RCC lintel |
| 21 | RCC chajja |
| 22 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 23 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment ( for inside area) |
| 24 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 25 | Supplying all materials, labour, T&P and fixing of Fixing KOTA Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete polishing etc all complete. as per the direction of the Engineer in charge. |
| 26 | Supplying all materials,labour and T&P for fitting and fixing of single Monorail section made out of ISMB 250X 125mm ( I section joist) including hoisting of the ISMB and placing in position under roof ceiling rigidly supported on the walls and beams at both ends and mid points with fixing of 16mm thick MS plate dully welded and jointed with the top flange of the ISMB and anchored on walls and beams with rigid and adequate bolting as per site condition including fitting and fixing of mechanical pulley 3 MT capacity with chain all complete confirming to IS-800-2007 for the positive suction pump houses etc all complete as per the direction of Engineer in charge. |
| 27 | ISMB ( 250x 125mm ) |
| 28 | MS plate ( 300mmx 300mmx 12mm ) |
| 29 | Hoisting joists and trusses and placing in position |
| 30 | Drilling holes 12mm to 25mm dia in iron flats, angles, tees etc. above 10mm thick & upto 16mm thick with hand drill(labour only) |
| 31 | Supplying all labour ,materials and t& P for fitting and fixing of indef ( P3) 3 Ton with 5 mtr Chain pulley block with double bearing , grade-80 material with rugged german design , zinc plated , casting type- Fully pocketed , spheroidal graphaite cast with 0.50 MT over load capacity with powder coated finished, the pulley block shall be comprised of , frame, gears, pawl, bearings, hooks, , load chain, load chain wheel, hand chain, hand chain wheel, hand chain guide and all other components like guide, stripper, midler wheels, anchorage etc confirming to IS 3832-1986 all complete as per direction of Engineer in charge |
| 32 | Supplying all labour, materials and toold and plants for enamel painting two coats over a coat of primer on MS doors/grills, ISMB joist, MS plate etc as per the approved shade and colour as per direction of Engineer in charge |
| 33 | Supplying all labour, material & T&P and Lowering of splitcase pumpset all complete |
| 34 | 40 HP pumpset |
| 35 | Supplying all labour, material & T&P for installation of the 40HP splitcase pump set in proper alignment in the sunken pump house using chain pulley etc completeas per direction of Engineer in charge |
| 36 | 40 HP pumpset |
| 37 | 16 mm. thick cement plaster (1 :6) over brick or stone masonry |
| 38 | 12 mm. thick cement plaster (1 :6) over brick or stone masonry |
| 39 | Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete . |
| 40 | Supplying all materials labour T&P for providing M.S. Grill/ Grill gate /Pipe as per following size as per specification.all complete. |
| 41 | Providing , fitting & fixing up UPVC ( Unplasticized Poly vinyle Chloride ) window (sliding type) with 5 mm clear float glass of LG profile as per approved specification including all cost conveyance labour T & P etc complete as per direction of Engineer in Charge. |
| 42 | Window - |
| 43 | Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete . |
| 44 | Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite chips including cost of all labour ,materials with all taxes, lead ,T & P etc all complete . |
| 45 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard) |
| 46 | Light Points, Group - A |
| 47 | Light Points Group - B |
| 48 | 5A Plug Point |
| 49 | Fan Point (Group - A) |
| 50 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. |
| 51 | Step up modular regulator for Fan |
| 52 | 15watt LED Bulb. |
| 53 | 1200mm Ceiling Fan Havells make Fusion |
| 54 | Electric 200mm Exhaust Fan (Havells Ventil air DB) |
| 55 | Titanio Pro LED Tube Light -18W (Double side connection) |
| 56 | 32A Double Pole MCB. |
| 57 | 5 Amp switch |
| 58 | 5 Amp socket |
| 59 | Ceiling Rose - |
| 60 | Angle Holder |
| 61 | 2.50 Sqmm 3 core copper armoured Cable |
| 62 | Providing weather coat painting two coats over a coat of primer of approved shade of walls including cost conveyance of all materials, etc. all complete as per specification & direction of Engineer-in-charge. |
| 63 | Supplying all labour, materials and toold and plants for enamel painting two cioatrs over a coat of primer on MS doors/grills as per the approved shade and colour as per direction of Engineer in charge |
| 64 | Double Stage Centering and Shuttering for Roof Slabs, Balconies and Projections above 3.60m and upto 7.20m heights |
| 65 | RCC roof slab |
| 66 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 67 | Supplying all materials, labour, and T&P for providing Puddle Collar as per relevant IS specifications including testing transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge. |
| 68 | 400mm dia CI Puddle Collar |
| 69 | for the GSR |
| 70 | Supplying all labour and tools and plants for Dismantling of RCC walls by means of core cutting of 150mm dia to avoid further damage to adjacent concrete and reinfcorement so that the reinforcement can be rewelded properly by chiselling with electric breaker weighing up to 7.50Kg with capacity of 20 joules impact to concrete at least leaving a weldable length that core should be taken to size they cut slabs to size so that can easily be removed from site by head load or by chain hauled from inside all complete |
| 71 | ( 0.60mt diax 0.45mtr thickness) - ( for Puddle collar ) 2x0.127 |
| 72 | Supplying all materials labour & T & P for making water proof Micro Concrete of any reputed brand (Preferable Perma Polycrete/jaipax) for R.C.C. works including hoisting and laying etc. complete as per direction of Engineer in charge. |
| 73 | for 600mm dia hole with fixing of 400mm dia Puddle collar |
| 74 | Supplying all labour, materials. T&P for for sealing the Joint usingPerma Polyseal (POLYSULPHIDE SEALANT) in 50mm x 25mm size groove including all cost. conveyance. wastages & taxes etc. all complete. |
| 75 | for 600mm dia hole with fixing of 400mm dia Puddle collar |
| 76 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 77 | 400mm dia M.S.Pipe (9.50mm thick) |
| 78 | 300mm dia M.S.Pipe (7.10mm thick) |
| 79 | 200mm dia M.S.Pipe (7.00mm thick) |
| 80 | 200mm dia M.S. Flange.(12mm thick) |
| 81 | 200mm x 150mm dia M.S. Reducer (Plain) |
| 82 | 150mm dia M.S.Pipe (6.30mm thick) |
| 83 | 150mm dia M.S. Flange.(12mm thick) |
| 84 | 150mm x 100mm dia M.S. Reducer plain |
| 85 | 100mm dia M.S. Flange.(10mm thick) |
| 86 | 200mm dia x45*Bend |
| 87 | Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient seated Sluice Valve / NR Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve . |
| 88 | 400mm dia D/F Sluice Valve (PN1.6) VAG /AVK/KIRLOSKAR or equivalent make |
| 89 | 150mm dia D/F Sluice Valve (PN1.6) VAG /AVK/KIRLOSKAR or equivalent make |
| 90 | 200mm dia D/F Sluice Valve (PN1.6)VAG /AVK/KIRLOSKAR or equivalent make |
| 91 | 200mm dia Ductile Iron Reflux Valves (Non-return valves) with double flanged ends VAG make |
| 92 | 25mm dia Tamper proof Duojet Air Valve (VAG or equivalent Make) |
| 93 | Supplying all labour T&P materials for fitting & Fxing of pressure meter Non comtact dipharma type with snubber, pipeing & needle valve at ESR as well as diferent lane & sub-lane to know the water pressure including the cost of pressre meter with drilling holes in pipe line & making good to the damages at including cost all labours T&P etc all complete as per the direction of Engieer-in-charges. 0 to 6kg/sqm pressure meter. -150mm dia |
| 94 | Supplying all materials,labour and T&P and laying in trenches D.I. (K-9) pipes conforming to I.S. spcification 8329 of 2000 all complete.(excluding earth work in trenches.) ( Including cost of pipe ) as per specification & direction of Engineer-in-charge all complete. |
| 95 | 400 mm D.I. (K-9) Pipe |
| 96 | Supplying all materials,labour and T&P and making tyton rubber ring joints for C.I. /D.l. pipes and the following diameter including testing of joints as per specification and direction of Engineer-in-charge etc all complete. |
| 97 | 400 mm D.I. (K-9) Pipe |
| 98 | Laying in trenches C.I./D.I & specials conforming to conforming to relevant IS specification of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials) |
| 99 | Assuming the qnty of specials @ 5 % on weight of DI pipe |
| 100 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 101 | Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete ( at work site) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender