Tender For Estimate For Repair Of Motors And Renovation Of Narunangal Lift Scheme At Rd 6593 Mtr. Of Kandi Canal Stage-2
Tender Value
35.20 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
9 days left
EMD
70414
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshiarpur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Repair Of Motors And Renovation Of Narunangal Lift Scheme At Rd 6593 Mtr. Of Kandi Canal Stage-2
BOQ
| Sl. No. | Item Description |
| 1 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 2 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 3 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 4 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 5 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 6 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).(a) Size 600x600 mm |
| 7 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 8 | CABLE TRAY:Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-((ii)) Cable Tray Size 300mm x 50mm x 50mm (2mm thick) |
| 9 | CABLE TRAY:Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-((iii)) Cable Tray Size 450mm x 50mm x 50mm (2mm thick) |
| 10 | ERECTION, REPAIR AND REWINDING OF FANS: ERECTION OF FANS: Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- Erection of Exhaust fan with louver shutter on the wall/ window grill |
| 11 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 12 | Steel work fixed independently without connecting plates including cutting hoisting and fixing inposition ((b)) FLATS |
| 13 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position ((c) ) Tees angles & channels |
| 14 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 15 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 16 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter. |
| 17 | Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects |
| 18 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 19 | 12.5 mm thick cement plaster 1:3 |
| 20 | (M-4) Asbestos cement products except pipes at site of work. ((iii)) Fibre Sheets:- ((a)) Fibre reinforced by organic fibres and / or inorganic synthetic fibres cement corrugated sheet 6 mm thick |
| 21 | LED based SPV Street Lightening Systems- 12 Watt - 75 SPV Module - 12.8V-30Ah. - Lithium Ferro Phosphate Battery (>2000 cycles)- 6 Mtr. Hot dipped GI Pole 76.1 mm OD, 3.6mm thick & Zinc coated |
| 22 | Dismantling concrete Reinforced cement concrete |
| 23 | Dismantling brick worktile, masonry or tile lining ((b)) In cement |
| 24 | Repair and Rewinding of VERTICAL SUBMERSIBLE POLDER TYPE PUMPS 100 HP, MakePullen, along with lifting shipping to workshop and back lowering to site including making of water proof cable joints from inside of pump casing and changing of lubricants and replacement of defective parts if any inside the pump like Bushes, wear rings, bush sleeves and thrust plate and bearings, carter couplings, Complete rotor set and mechanical sealcomplete in all respects. |
| 25 | Supplying, Installation, Testing & Commissioning of 100 HP SOFT STARTER; Adjustable overload protection soft starter 100 HP 3-wire suitable for inline connection with LCD display for precise motor start, stop, monitor, control and protection having adjustable settings like initial voltage output between 30-70% of the nominal voltage, soft starters rated full load current with timer, adjustable etc. Soft starter must have integrated motor and load protection features like overload Each protection with dual overload class settings, high current protection, locked rotor protection, under load protection and torque control feature for precise pump control compatiable Make of soft starters-ABB/Schnider/Seimens/L&T/C&S |
| 26 | Kail wood doors shutter and window shutter panelled, glazed or glazed and panelled including hinges screws chokes cleats and cords etc. complete Fixed in position (Single Leaf)((b)) 35mm thick |
| 27 | Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf) ((a)) 35mm thick |
| 28 | Providing and fixing 10 Turndoor Lock |
| 29 | Any Other Item (CSR + SP) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender