Tender For Design, Supply & Erection Of Anti-Bird Disc For Prevention Of Bird Faults, Monkey Menace For Prevention From Climbing Of Monkeys Over Traction Installation Structures, 5 Kva Auxiliary Transformers With At Masts, 75 X 8 Mm Ms Earth Flat Use
Tender Value
7.68 Crore
Estimated cost
Bid Submission
16 Sep 2026
3 days left
EMD
15.36 Lakhs
Bank guarantee accepted
Document Fee
8260
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dakshina Kannada → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design, Supply & Erection Of Anti-Bird Disc For Prevention Of Bird Faults, Monkey Menace For Prevention From Climbing Of Monkeys Over Traction Installation Structures, 5 Kva Auxiliary Transformers With At Masts, 75 X 8 Mm Ms Earth Flat Used In Indian Railways For Heavy Grounding In Sakleshpur - Subrahmanya Road - Padil Section And Procurement Of Spares, Tools & Plants For Ohe/Psi Depot At Sakleshpur Of Mysuru Division, South Western Railway
BOQ
| Sl. No. | Item Description |
| 1 | Design, Supply & Erection of Anti-Bird Disc for Prevention of Bird Faults, Monkey Menace for Prevention from Climbing of Monkeys over Traction Installation Structures, 5 kVA Auxiliary Transformers with AT Masts, 75 x 8 mm MS Earth Flat used in Indian Railways for Heavy Grounding in Sakleshpur – Subrahmanya Road – Padil Section and Procurement of Spares, Tools & Plants for OHE/PSI Depot at Sakleshpur of Mysuru Division, South Western Railway |
| 2 | Schedule-A- Supply of Anti Bird Discs, Monkey Menace,5KVA AT,AT masts,75X8mm MS earth flat. |
| 3 | Schedule-B-Erection of Anti Bird Discs, Monkey Menace,5KVA AT,AT masts,75X8mm MS earth flat. |
| 4 | Schedule-C- Foundation work |
| 5 | Schedule-D-Procurement of SPARES, T&P for Sakleshpur Depot |
| 6 | Provision of anti bird disc for prevention of bird fault in composite and porcelain insulator(Stay tube insulator,bracket tube insulator and 9ton insulator) as per RDSOMaintenance instruction No. TI/MI/0059 Rev-3 OR LATEST.(Supply). |
| 7 | Provision of Monkey Menace for prevention from climbing of Monkey over Traction Installation structuresas per Maintenance Instruction No. TI/MI/0056, Rev-2 OR LATEST.(Supply) |
| 8 | Suitable Masts |
| 9 | Suitable Portals |
| 10 | LT supply transformer Mast (38.18 kg/Mtr) ,9.30 meters long as per RDSO drawing no ETI/PSI/037 Mod-C or latest and along with all required SPS for installation of AT (Supply). |
| 11 | 25 kV/ 240V,5 kVA,50Hz, SINGLE PHASE, OIL FILLED AUXILIARY TRANSFORMERS FORRAILWAY A.C. TRACTION SYSTEM as per RDSO specification no. ET/PSI/15(08/2003) or latest.(Supply). |
| 12 | 75x8 mm Earth flat of standard mild steel (MS)/Galvanized iron(GI) flat used in Indian Railways for heavy-duty grounding.(Supply) |
| 13 | Supply, Erection, Oil Filtration, Testing and Commissioning of 25 KV/240 Volt, 5 KVA, LT supply transformer with 25 KV D.O. fuse switch assembly, anticlimbing device, Arcing horns, post insulators, copper jumper and earth electrode etc:With Porcelain Insulators 1050mm CD under power block/line block (Erection) |
| 14 | Erection of 75×8 mm MS Earthing Flat complete withtransportation,drilling,epoxy grouting,fixing, cutting, welding, clamps,anchor fasteners, connection to earth electrodes, labour, tools& tackles, consumables, safety arrangements and all incidentalworks in major and minor railway tunnels of an electrified section, including execution during line/power blocks asrequired as per approved drawing.(Erection) |
| 15 | Provision of anti bird disc for prevention of bird fault in composite and porcelaininsulator(Stay tube insulator,bracket tube insulator and 9ton insulator) as per RDSOMaintenance instruction No. TI/MI/0059 Rev-3 OR LATEST& TI/DRG/OHE/ABD/RDSO/00000/19/0 rev-2 or latest.under power block/line block (Erection) |
| 16 | Monkey Menace Prevention from climbing of Monkey over Traction Installation structures as per Maintenance Instruction No. TI/MI/0056, Rev-2 OR LATEST.under power bloc/line block (Erection) |
| 17 | Erection of all type of galvanized steel structures, small parts of steel etc.(Erection) AT Masts(T-150) and its SPS-19 No's under power block/line block . |
| 18 | Preparation of design drawings for overhead equipments and verification of pegging palns, tunnel earthing arrangment drawings, Monkey menace, anti bird and AT for tunnel lighting work drawings.(Erection) |
| 19 | Providing and laying of concrete for foundation and plinth in all type of soils using M-10 grade concrete for foundation and M-15 grade concrete for grouting and muffingincluding nominal reinforcement wherever required as per RDSO drawings (Supply) |
| 20 | Providing and laying of concrete for foundation and plinth in all type of soils using M-10 grade concrete for foundation and M-15 grade concrete for grouting and muffingincluding nominal reinforcement wherever required as per RDSO drawings (Erection) |
| 21 | 100% Extra payment for over the item for foundation and plinth in Hard rock/heavy concrete requiring chiselling/blasting/machine breaking |
| 22 | T & P ITEMS TO BE KEPT FOR OHE MAINTENANCE SAKLESHPUR DEPOT |
| 23 | Supply of TRIFOR 2.5 TONNE /1.5 TONNE WITH 20M STEEL ROPE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 24 | Supply of TRIFOR 5 TONNE /3 TONNE WITH 20MM STEEL ROPE MULTIPURPOSE, PORTABLE, UNIVERSAL, GEARLESS, HAND OPERATED PULLING AND LIFTING MACHINE, SUPPLIED COMPLETE WITH TELESCOPE OPERATING HANDEL AND 10 MTR LENGTH OF WIRE FITTED WITH D-SHACKLE. CAPACITY: 3.2 TONNE LIFTING AND 5.2 TONNE PULLING. as per RDSO specification no TI/SPC/OHE/TOOLPL/0990 WITH A&C SLIP NO.1, complete including handing over to the depot as per direction of Engineer |
| 25 | Supply of PULL -LIFT 3/4 TONNE (WITH LOOP TYPE CHAIN) as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 26 | Supply of DROPPER MAKING JIG 5MM WIRE STRAIGHTNER FOR DROPPER WIRE as per RDSO specification no POWER/RLY/7861, complete including handing over to the depot as per direction of Engineer |
| 27 | Supply of COME ALONG CLAMPS FOR CATENARY WIRE SUITABLE FOR 19/2.108 MM CONDUCTOR as per RDSO specification no POWER/3981, complete including handing over to the depot as per direction of Engineer |
| 28 | SUPPLY OF CONTACT WIRE ENDING CLAMP COMPLETE ASSEMBLY, CLAMP BODY (PART NO.1118-3), WEDGE (PART NO.1119-3) AND PART NO.263 WITH FASTENERS (SPLIT PIN & WASHER) SUITABLE FOR 107 SQ. MM CONTACT WIRE as per RDSO specification no TI_SPC_OHE_Fittings_0130_with A_C_Slip_No_1, ETI-OHE-13 (4-84) may 2018, complete including handing over to the depot as per direction of Engineer |
| 29 | Supply of UNIVERSAL COME ALONG CLAMP (M.S. STEEL BODY) SUITABLE FOR COPPER CONDUCTOR OF SIZE 65 SQ.MM TO 150 SQ.MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 30 | Supply of RAIL JUMPERS WITH RAIL CLAMPS AT BOTH END WITH 13 MTR. LONG PVC COPPER CABLE as per RDSO specification no ETI/OHE/3/(2/94) with A& C slip no 1 (04/95), complete including handing over to the depot as per direction of Engineer |
| 31 | Supply of RAIL JUMPERS EXTENSION WITH CLAMPS AT ONE ENDS 16 SQ.MM COPPER CABLE 14 MTRS LONG. Of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 32 | Supply of EARTH DISCHARGE ROD COMPLETE (LIGHT WEIGHT 11 KGS) EARTH DISCHARGE ROD ASSEMBLY FOR 25KV AC TRACTION TO BE SUPPLIED ALONG WITH TWO RAIL CLAMPS, TOP CLAMP(10MM TO 20MM DIA CONDUCTOR), AND CABLE 9 METERS LONG WITH CANVAS BAG as per RDSO specification no (ETI/OHE/51(9/87) Re.1, Oct 92), complete including handing over to the depot as per direction of Engineer |
| 33 | SUPPLY OF ALUMINUM LADDER A-TYPE 10FEET PLATFORM HEIGHT, FOLDABLE ALUMINUM LADDER WITH SUPPORT HAND RAILS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 34 | Supply of ALUMINUM STRAIGHT LADDER HEIGHT 8M WITH HOOK ON TOP C TYPE RUBBER BUSH IN of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 35 | Supply of ALUMINUM MAGIC POLE LADDER 08 FEET HEIGHT as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 36 | Supply of ALUMINIUM STRAIGHT LADDER EXTENDABLE (11 MTRS) WITH LOCKING DEVICE, PULLING ROPE, RUBBER SHOES ETC. ALUMINIUM WALL SUPPORTING-SLIDING LADDER, LADDER OPEN HEIGHT: 36 FEET, LADDER CLOSED HEIGHT: 20 FEET REACH HEIGHT: 40 FEET, BOTTOM WIDTH: 16 FEET, NUMBER OF STEPS-:20-40, FITTED WITH BOTTOM RUBBER, SIDE LOCK, SIDE PLUG, LOCKING SYSTEM: YES as per IS 3696-2, complete including handing over to the depot as per direction of Engineer |
| 37 | Supply of PORTABLE ELECTRIC DRILLING MACHINE TO DRILL UPTO 25.0 MM DIA HEAVY MOUNTED WITH PEDESTAL TYPE STAND SUITABLE FOR DRILLING RAILS AND OPERATING MECHANISM TO WORK ON 230 V as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 38 | Supply of BENCH GRINDER ( DOUBLE END ) PEDESTAL MOTOR DRIVEN (203MM ) DISC as per approved ISI Make: BOSCH,EEC, ALFA ,YATRA OR SIMILAR complete including handing over to the depot as per direction of Engineer |
| 39 | Supply of 1 ph PORTABLE WELDING MACHINE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 40 | Supply of PORTABLE ELECTRIC DRILL 21.0MM 1PH, 230V STANLEY/ DEVALT MAKITA OR SIMILAR as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 41 | Supply of HONDA WELDING GENERATING SET (100/200 AMP) WITH ALL ACCESSORIES as perapproved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 42 | Supply of DIESEL START, DIESEL RUN POWER GENERATORS AND PORTABLE GENERATORS as per approved ISI Make KOEL Chhota Chilli BY KIRLOSKAR , complete including handing over to the depot as per direction of Engineer |
| 43 | Supply of PORTABLE DIESEL GENERATING SET 1 KVA 240 V, 1 PH as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 44 | Supply of GLYNC 500W LED LUMINAIRE FOR FLOOD LIGHT as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 45 | Supply of FIRST AID BOX (make GI/AL sheet First Aid Box with see through glass door to be provided and filled with medicines as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 46 | Supply of KANHAS ALUMINIUM STRETCHER FOR EMERGENCY AND RESCUE OPERATIONS Dimensions: infolded 2100x560x150mm and folded 1100x200x110mm, max weight 8Kg, suitable for load weight upto 150Kg. As per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 47 | Supply of FALCON 10 liter GALVANIZED MILD STEEL FIRE BUCKET as per approved ISI Make FALCON or latest, complete including handing over to the depot as per direction of Engineer |
| 48 | Supply of PORTABLE FIRE EXTINGUISHER (5 KG) CO2 TYPE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 49 | Supply of PORTABLE FIRE EXTINGUISHER (CAP. 10 KGS.) DRY CHEMICAL POWDER TYPE WITH GM/BRASS as per IS 15683, complete including handing over to the depot as per direction of Engineer |
| 50 | Supply of CONTACT WIRE CUTTER 36\\" as per approved ISI Make TAPARIA OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 51 | Supply of DROPPER WIRE CUTTER 12\\" as per approved ISI Make TAPARIA OR SIMILAR , complete including handing over to the depot as per direction of Engineer |
| 52 | Supply of ALLOY STEEL D SHACKLE SET OF ONE EACH (1\\", 3/4\\", 5/8\\", 1/2\\"). As per approved ISI Make SSTE OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 53 | Supply of SINGLE SLEEVE PULLEY BLOCK WHEEL SIZE 3-1/2\\" X 1/2\\" GROOVED STEEL LOAD OF CAPACITY of approved ISI Make SSTE, IM OR SIMILAR , complete including handing over to the depot as per direction of Engineer |
| 54 | Supply of SINGLE SLEEVE PULLEY BLOCK 3 1/2\\" X 1/2\\" FIBER GROOVE OF CONTACT / CATENARY WIRE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 55 | Supply of SINGLE SLEEVE PULLEY BLOCKS 6 INCH (150MM) X 1 INCH(25MM) GROOVE STEEL Make SSTE as per IS: 13156 of 1991, complete including handing over to the depot as per direction of Engineer |
| 56 | Supply of CONTACT WIRE TWIST CUM BENDER 6\\". As per latestRDSO specification no RE/DNR/TP/12/2000, complete including handing over to the depot as per direction of Engineer |
| 57 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 1 M LONG as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 58 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 2 M LONG as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 59 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 3 MTR LONG CAPACITY 2 TONNE as per approved ISI Make MODI WIRE ROPE SLING, SUPREME, USHA MARTIN or equivalent, complete including handing over to the depot as per direction of Engineer |
| 60 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 4 M LONG as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 61 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 10 MTR LONG as per approved ISI Make MAHADEV, TAPRIA, VENUS OR SIMILAR , complete including handing over to the depot as per direction of Engineer |
| 62 | Supply of CONTACT WIRE SPLICING JIG, SUITABLE FOR 107 SQMM COPPER CONTACT WIRE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 63 | Supply of COPPER HAMMER 2 KGS WITH HANDLE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 64 | Supply of 0-50 MM (SCREW GUAGE) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 65 | Supply of FABRIC METRIC TAPE 30 METER LONG 15MM WIDE of approved ISI Make PVC , complete including handing over to the depot as per direction of Engineer |
| 66 | Supply of HERMAN CAST FIXED BASE BENCH VISE 6'' of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 67 | Supply of LIGHT WEIGHT IRON LADDER TROLLEY COMPLETE ASSEMBLY WITH 4 NOS. OF CAST NYLON WHEELS FITTED WITH BEARING OF SIZE: 6305 FITTED TO BOTH SIDES OF WHEEL COMPLETE WEIGHT OF LADDER TROLLEY IS 200 KGS APPROXIMATE, COMPLETE LIGHT WEIGHT LADDER TROLLEY. TROLLEY SUITABLE FOR 25KV TRACTION OHE MAINTENANCE as per RDSO specification no LWL/TROLLEY/TRD/SC, WHEEL & LADDER TROLLEY WHEEL/TRD/SC/2013, complete including handing over to the depot as per direction of Engineer |
| 68 | Supply of ENGINEERING RATCHET SUITABLE FOR (PULL LIFT) CAPACITY 1.6 TONNE COMPLETE WITH ROLLER CHAIN IS - 2403 -1975 AND HOOK WITH SAFETY LATCHES (IS 8610 -1977), complete including handing over to the depot as per direction of Engineer |
| 69 | Supply of SIREN SUITABLE FOR OPERATION ON 50HZ. 230 VOLTS SINGLE PHASE SUPPLY MAINS.THE RANGE OF THE SIREN SHALL BE 1KM as per latest specifications and make, complete including handing over to the depot as per direction of Engineer |
| 70 | Supply of TRICOLOR LED TORCH HIGH POWER 3 WATT LED BASED TRICOLOR (RED, WHITE, GREEN) HAND HOLD TORCH, LIGHT WITH UNBREAKABLE GLASS. WEIGHT NOT EXCEEDING 200 GRAMS AND OPERATION WITH RECHARGEABLE BATTERY as per latest specifications and make , complete including handing over to the depot as per direction of Engineer |
| 71 | Supply of TRIFOR 3 TONNER /2 TONNE MAKE TRIFOR of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 72 | Supply of SPRING BALANCE (0-25 KG) DIAL TYPE as per latest specifications and make, complete including handing over to the depot as per direction of Engineer |
| 73 | Supply of DERRICK 11M IN 2 PIECES as per latest specifications and make , complete including handing over to the depot as per direction of Engineer |
| 74 | Supply of WIRE CLAWS 8 PRONGED 572 mm LENGTH MADE OF ROD 6 mm DIA as per specification G/MW/SC/GL/3874, complete including handing over to the depot as per direction of Engineer |
| 75 | Supply of CROW BAR as per latest specification and make, complete including handing over to the depot as per direction of Engineer |
| 76 | Supply of SHOWELS as per latest specifications and make , complete including handing over to the depot as per direction of Engineer |
| 77 | Supply of MOTOR PAN OF LIGHT STEEL WEIGHT 1 KG as per specification no BFS/CIW, complete including handing over to the depot as per direction of Engineer |
| 78 | Supply of JHALANI T50 DOUBLE FACE SLEDGE HAMMER WITH WOOD HANDLE 5000 GRAMS as per latest specifications and Make Jhalani or equivalent, complete including handing over to the depot as per direction of Engineer |
| 79 | Supply of ISKON-G WOOD HANGLE PICK AXE WITH CHISEL WIDE AND POINT END PICK AXE WITH DIGGING HEAD Make ISKON-G as per latest specifications and make , complete including handing over to the depot as per direction of Engineer |
| 80 | Supply of LIGHT WEIGHT MANUAL TELESCOPIC PRUNER ABLE TO CUT TREE BRANCHES UP TO 20-22 FEET WITH CUTTING BLADE LENGTH 50CM OR ABOVE,EASILY DETACHABLE,3 STAGE EXTENDABLE 17 FEET LENGTH, WEIGHT 3.5 KG as per latest specification and make ARS. JAPAN / STHIL, complete including handing over to the depot as per direction of Engineer |
| 81 | SUPPLY OF MANILA ROPE OF SIZE 3/4 INCH as per latest specifications and Make SUPREME OR ITS EQUIVALENT, complete including handing over to the depot as per direction of Engineer |
| 82 | SUPPLY OF MANILA ROPE OF SIZE 1/2 Inch as per latest specifications and Make LOIN, complete including handing over to the depot as per direction of Engineer |
| 83 | SUPPLY OF MANILA ROPE OF SIZE 1 Inch as per latest specifications and Make SUPREME OR ITS EQUIVALENT, complete including handing over to the depot as per direction of Engineer |
| 84 | SUPPLY OF HEAVY DUTY 18 V BATTERY OPERATED CHAMFERING TOOL MACHINE WITH HSS DRILLS 4 NOS FOR CHAMFERING OF 17.5 MM HOLE SUITABLE SIZE OF 20/22 MM AND CHAMFERING BIT OF SIZE 5/8 INCH HAVING SHANK 10 MM DIA as per RDSO specification no TM-53 REV.01OF 2004, complete including handing over to the depot as per direction of Engineer |
| 85 | Supply of MANNUAL RAIL HOLE DRILLING RACHET AND CLAMP WITH CHAMFERING TOOL as per latest specifications and approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 86 | Supply of SUPPLY AND DEMO OF OPERATION FOR PORTABLE WELDING GENERATOR as per latest specifications and approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 87 | Supply of BATTERY OPERATED LED BASED FLASHING TAIL LAMPS as per RDSO specification no 2002/TR/281/TL(REV.0), complete including handing over to the depot as per direction of Engineer |
| 88 | Supply of HYDRAULIC DYNAMOMETER 10 TONNE CAPACITY WITH STEEL CARRYING BOX 150MM DIA as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 89 | Supply of HYDRAULIC INSULATOR TESTING JIG FOR TENSILE LOAD TESTING OF 25KV PORCELAIN AND COMPOSITE INSULATORS as per RDSO specification no TI/SPC/OHE/INTEST/0090(2/2009), complete including handing over to the depot as per direction of Engineer |
| 90 | Supply of RUBBER INSULATED HAND GLOVES SEAMLESS TYPE, TEST VOLTAGE 25000 VOLTAGE AC FIVE of approved ISI make KWALITY, CRYSTAL, REGELTEX or equivalent, complete including handing over to the depot as per direction of Engineer |
| 91 | Supply of LED RECHARGEABLE HAND TORCH FITTED WITH RECHARGEABLE ELECTRIC PLUG AT BOTTOM END, 2W+3W LED, ALUMINUM REFLECTOR, 1200 MAH LITHIUM BATTERY of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 92 | Supply of LICENSE FREE WALKIE TALKIE WITH ADAPTER, BATTERY, CHARGER & ANTENNA as per latest specifications and make TALKPRO LF446, complete including handing over to the depot as per direction of Engineer |
| 93 | SUPPLY OF 2.5KV MEGGER as per latest specifications and make Sonel /MIC 5005, complete including handing over to the depot as per direction of Engineer |
| 94 | Supply of DIGITAL EARTH TESTER WITH IN BUILT RECHARGEABLE BATTERY 3.5 DIGIT LCD DISPLAY as per latest specifications and make MOTWANE EEE-TECH / METRAVI/ WACO OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 95 | SUPPLY OF DIGITAL EARTH CLAMP TESTER TO MEASURE EARTH/GROUND RESISTANCE, 4 DIGIT (9999 COUNTS) LCD DISPLAY SUITABLE USE FOR RANGE : 0.01 OHM TO 1000 OHM, LEAKAGE CURRENT RANGE : 0.5MA TO 30A , AUTO POWER OFF, LONG JAW & LARGE JAW OPENING, MEMORY RECORDS : 99 SETS WITH LOW BATTERY INDICATION, OVERLOAD PROTECTION, PROTECTION LEVEL : DOUBLE INSULATION, ALONG WITH ACCESSORIES : BATTERY (INSTALLED), TEST LEAD, CARRYING BAG, USER MANUAL AND ANY OTHER NECESSARY ACCESSORY as per latest specifications and METRAVI MAKE, MODEL : CET-03, complete including handing over to the depot as per direction of Engineer |
| 96 | Supply of CELESTRON 20 X BINOCULAR as per latest specifications and make OPTICS/MECHANICS, complete including handing over to the depot as per direction of Engineer |
| 97 | SUPPLY OF VERNIER CALIPERS DIGITAL, RANGE 0-200 MM as per latest specifications and Mitutoyo make model 500-197-30, complete including handing over to the depot as per direction of Engineer |
| 98 | Supply of WALKIE TALKIE SETS ( 2 W OUT PUT) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 99 | Supply of EMERGENCY TELEPHONE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 100 | Supply of METRAVI HAND HELD 50 KHZ DIGITAL MULTIMETER as per latest specifications and make Metravi, complete including handing over to the depot as per direction of Engineer |
| 101 | Supply of THERMO VISION CAMERA as per latest RDSO specification no SWR/PCEE/TRD/OHE-PSI/TIC, REV-0 December-2024, complete including handing over to the depot as per direction of Engineer |
| 102 | Supply of TOOL BOX, SIZE: - 430 X 230 X 200 MM (APPROX.) WITH TOOL AND FIXING ARRANGEMENT OF TOOLS WITH LOCKING FACILITY of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 103 | Supply of DOUBLE ENDED OPEN END SPANNER SET CONSISTS OF 12 ITEMS. EACH SET MUST CONSISTS 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23, 24X26, 25X28, 30X32 and 36X41. as per latest specifications and make TAPARIA OR DENEER OR STANLEY OR BLUE POINT OR VENUS, complete including handing over to the depot as per direction of Engineer |
| 104 | Supply of DOUBLE ENDED RING SPANNER SET 6X7, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23. of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 105 | Supply of SCREW DRIVERS 6\\" of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 106 | Supply of SCREW DRIVERS 12\\" of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 107 | Supply of HAMMER 1/2 LB of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 108 | Supply of INSULATED CUTTING PLIER ( 8-12) as per latest specifications and make TAPARIA OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 109 | Supply of PLUMB BOB MADE OF MILD STEEL WITH COTTON THREAD APPROX WEIGHT 450 TO 500 GRAMSM IN CONICAL SHAPE WITH ANTI CORROSION PAINT as per latest specifications and make TAPARIA, VENUS, JHALANI, complete including handing over to the depot as per direction of Engineer |
| 110 | Supply of HACK SAW BLADE 400X32 MM as per latest specifications and make BIPICO, complete including handing over to the depot as per direction of Engineer |
| 111 | Supply of SPIRIT LEVEL 6\\" as per latest specifications and make FREEMANS OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 112 | Supply of FILE SMOOTH CUT 200 MM WITH INSULATED HANDLE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 113 | Supply of 30 WATT LED RECHARGEABLE FLOOD LIGHT FIXTURE HAVING DIE-CAST ALUMINUM ENCLOSURE AND M.S EPOXY POWDER COATED STRUCTURE DESIGNED FOR MAXIMUM EFFICIENCY, RUGGED CONSTRUCTION WITH TOUGHENED GLASS, APPROPRIATE GASKET FOR WEATHERPROOF PROTECTION IP 66, BATTERY BACKUP OF HIGHLY RELIABLE LITHIUM-ION PHOSPHATE (LIFE PO4) BATTERIES. BACKUP 8 HRS IN NORMAL MODE. AND 4 HRS TURBO MODE as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 114 | Supply of DOUBLE STRAP FULL BODY SAFETY HARNESS:SAFETY BELT SAFETY FULL BODY K 102 FOR FOR WORKING IN OVERHEAD LINE (IS3521:1999). Make KARAM, RAYCHEM, ALLEN COPPER/SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 115 | Supply of SAFETY HELMETS PERFORATED AS PER IS: 2925 STANDARDS, complete including handing over to the depot as per direction of Engineer |
| 116 | Supply of ORANGE COLOR PERFORATED FLUROSCENT RETROREFLECTIVE DOUBLE BAND JACKET of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 117 | Supply of DUCK BACK NAVY BLUE POLYESTER RAIN COAT ASSORTED SIZES (S,M,L,XL,XXL,XXXL) as per latest specifications and make Duck Back, complete including handing over to the depot as per direction of Engineer |
| 118 | Supply of BUFFER SAFETY FOOTWEAR - BIS SPECIFICATION PERSONAL PROTECTIVE EQUIPMENT As per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 119 | Supply of INDUSTRIAL DIGITAL THERMOMETER as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 120 | Supply of PA MEGA PHONE WITH SIREN as per latest specifications and make 1.AHUJA. MODEL NO. 21S/AM21SD 2.Max Hitune Bass Pm-90s ,3. Pyle Megaphone PMP50. / Similar , complete including handing over to the depot as per direction of Engineer |
| 121 | Supply of PETROL DRIVEN LIGHT WEIGHT RAIL DRILL MACHINE WITH 52 KG & 60 KG RAIL ADOPTER AND 2 PAIRS OF DRILLS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 122 | Supply of BALL TYPE THROW FLAME TOUCH OPERATED FIRE EXINGUISHER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 123 | Supply of CARBIDE TIPPED BLADE CHAIN SAW as per latest specifications and make JTH, complete including handing over to the depot as per direction of Engineer |
| 124 | Supply of TWIST ROD FOR BOND FABRICATION of approved ISI make, complete including handing over to the depot as per direction of Engineer |
| 125 | Supply of PORTABLE CUTTING MACHINE (HAND HELD) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 126 | Supply of PETROL OPERATED HAND HELD CHAIN SAW MACHINE (TREE CUTTING MACHINE) OF 2 STROKE ENGINE WITH CAPACITY 2.4 HP & 9000 RPM OR SIMILAR of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 127 | Supply of WEDGE TYPE COME ALONG CLAMPS FOR LARGE SPAN WIRE 130 sq mm as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 128 | Supply of ALUMINIUM LADDER 15 MTRS FOR CROSS TRACK FEEDER CHECKING as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 129 | Supply of MIRROR GAUGE FOR STAGGER MEASUREMENT(HEIGHT & STAGGER) as per approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 130 | Supply of EARTH AURGER DEISEL OPERATED of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 131 | Supply of CHAMPERING TOOLS FOR BONDING WORK of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 132 | SUPPLY OF OHE CAUTION BOARD WITH SUPPLY OF FIXING MATERIAL (CLAMP, BACK FLAT STRIP & FASTENERS) FOR WARNING BOARD FOR NEUTRAL SECTION (I) 500M & 250 M SIZE 750MM X 450MM X 2MM (RETRO REFLECTIVE TYPE) (II) ELECTRIC ENGINE TO SWITCH ON & OFF SIZE 800MMX 400MM X 2MM (RETRO REFLECTIVE TYPE ) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 133 | Supply of GRINDING CUM WIRE CUTTER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 134 | Supply of GEARLESS HAND OPERATED PULLING AND LIFTING MACHINE (TIRFOR)1.6 TONNE CAPACITY as per RDSO specification no TI/SPC/OHE/TOOLPL/0991 REV 1 OR LATEST, complete including handing over to the depot as per direction of Engineer |
| 135 | Supply of PULL LIFT 0.75 TON as per latest specifications and make TRACTEL or equivalent, complete including handing over to the depot as per direction of Engineer |
| 136 | Supply of CONTACT WIRE COME ALONG CLAMP of ISI approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 137 | Supply of GI WIRE 8 S.W.G of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 138 | Supply of BANNER FLAGS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 139 | Supply of HAND SIGNAL FLAGS (RED + GREEN) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 140 | Supply of NYLON THREAD FOR CHECKING RAIL LEVEL of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 141 | Supply of FREEMANS 15 METER FIBREGLASS MEASURING TAPE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 142 | Supply of VERNIER CALLIPER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 143 | Supply of 25 KV DROP OUT FUSE SWITCH ASSEMBLY WITHOUT INSULATORS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 144 | Supply of AEROPLANE JACK (HYDRAULIC JACK 5 TON) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 145 | Supply of CONTACT WIRE KINK REMOVERS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 146 | Supply of INSULATED CUTTING PLIERS (8\\") (COMBINATION PLIER 210 MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 147 | Supply of INSULATER NOSE PLIERS (8\\") (210 MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 148 | Supply of ADJUSTABLE PIPE WRENCH 12\\", 10\\" & 8\\" (305 MM, 300 MM, 205 MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 149 | Supply of GREASE GUN as per latest specifications and make MODEL NO GGL 20C LEVER TYPE, complete including handing over to the depot as per direction of Engineer |
| 150 | Supply of TORQUE RENCH as per latest specifications and make MODEL NO TWP 10, complete including handing over to the depot as per direction of Engineer |
| 151 | Supply of WD -40 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 152 | Supply of NUT DRIVER SET as per latest specifications and make (MODEL NO -BDS 125) , complete including handing over to the depot as per direction of Engineer |
| 153 | Supply of BRIDGE MAST SPANNER SET 50X52 (RING & D SPANNER 46X50) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 154 | Supply of PIPE RENCH BIG 900 MM as per approved ISI specifications and make (MODEL NO 1277) , complete including handing over to the depot as per direction of Engineer |
| 155 | Supply of PIPE RENCH SMALL 200 MM as per latest ISI specifications and make (MODEL NO 1271) , complete including handing over to the depot as per direction of Engineer |
| 156 | Supply of BOLT CUTTER (BC -36) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 157 | Supply of REGULATING EQUIPMENT (ATD) : THREE PULLEY TYPE WITH MODIFIED PULLEY GROOVED (3:1 RATION) WITH USE as per RDSO specification no TI/SPC/OHE/ATD/0060 REV-1 WITH A & C SLIP NO. 1, complete including handing over to the depot as per direction of Engineer |
| 158 | Supply of TEMPORARY MAST AND ANCHOR FIXING BOLTS 16X50X37/ 20X50X37MM as per RDSO specification no ETI/C/0072, and SPIKES FOR TEMPORARY MASTS AND ANCHOR BASE PLATE as per RDSO specification no ETI/C/0072, complete including handing over to the depot as per direction of Engineer |
| 159 | Supply of HP INTEL CORE I3 ALL IN ONE PC WITH 23.8 INCH DISPLAY/ WINDOWS 11 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 160 | Supply of 6 BOX PERSONAL LOCKER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 161 | Supply of 9 BOX TOOL LOCKERS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 162 | Supply of HP LASER MONO COMPUTER PRINTERS FOR A4 PAPER SIZE as per approved ISI make, or equivalent, complete including handing over to the depot as per direction of Engineer |
| 163 | Supply of FOG SIGNAL DETONATOR DRG.NO. DGOF-209 & 210 SPECN.NO. DGOF/104 DT. 29.06.94 OR LATEST. Self life - 6 Yrs, complete including handing over to the depot as per direction of Engineer |
| 164 | T & P ITEMS TO BE KEPT FOR PSI MAINTENANCE AT SAKLESHPUR DEPOT |
| 165 | Supply of TIRFOR 2/3 TON CAP of approved ISI make tirfor or equivalent, complete including handing over to the depot as per direction of Engineer |
| 166 | Supply of TIRFOR 3/5 TON CAP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 167 | Supply of UNBRANDED HAND OPERATED PNEUMATIC BARREL PUMP, CAPACITY 200 LITER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 168 | Supply of ALLOY STEEL D SHACKLE SET OF ONE EACH (1\\", 3/4\\", 5/8\\", 1/2\\") of approved ISI make SSTE or equivalent, complete including handing over to the depot as per direction of Engineer |
| 169 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 1 M LONG of approved ISI make IEP or equivalent, complete including handing over to the depot as per direction of Engineer |
| 170 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 3 M LONGof approved ISI make MODI WIRE ROPE SLING, SUPREME, USHA MARTIN or similar, complete including handing over to the depot as per direction of Engineer |
| 171 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 1 M LONG of approved ISI make IEP or equivalent, complete including handing over to the depot as per direction of Engineer |
| 172 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 10 M LONG of approved ISI make MAHADEV, TAPRIA, VENUS or similar, complete including handing over to the depot as per direction of Engineer |
| 173 | Supply of CHAIN PULLEY BLOCK 3 TONNE CAPACITY, WITH STANDARD LIFT 3 METER of approved ISI make IM, BHARAT, TRACTEL, OR HY-TECH or similar, complete including handing over to the depot as per direction of Engineer |
| 174 | Supply of SINGLE SLEEVE PULLEY BLOCK STEEL, SIZE 8 INCH X 3/4 INCH GROOVED, 3 TONNE CAPACITY as per IS: 13156 of 1991, complete including handing over to the depot as per direction of Engineer |
| 175 | Supply of UNBRANDED HAND OPERATED PNEUMATIC BARREL PUMP, CAPACITY 200 LITER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 176 | Supply of MEDITECH HEALTH CARE ALUMINIUM STRETCHER FOR EMERGENCY AND RESCUE OPERATIONS of approved ISI make Meditech Health care or equivalent, complete including handing over to the depot as per direction of Engineer |
| 177 | Supply of FIRE BUCKETS supply of a set of 4 Fire buckets (Min 10 Litres capacity) filled with clean dry sand and held on one stand and cover shed and suitable for each switching station/TSS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 178 | Supply of BOSCH LIMITED CORDED BRUSHED ELECTRIC DRILL 550 WATT of approved ISI make BOSCH or similar, complete including handing over to the depot as per direction of Engineer |
| 179 | Supply of CRIMPING TOOL UPTO 6 SQMM SIZE of approved ISI make JAINSON MODEL VIRAT 6 OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 180 | Supply of ALUMINIUM STEP LADDER 8 FEET as per latest specifications and make Kalco, Equal or Similar, complete including handing over to the depot as per direction of Engineer |
| 181 | Supply of ALUMINIUM WALL SUPPORTING STRAIGHT LADDER WITH TOP HOOK, HEIGHT : 08 FEET of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 182 | Supply of ALUMINIUM STEP LADDER 16 FEET HEIGHT as per latest RDSO specifications and make S J LADDERS.OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 183 | Supply of SUMER AXIS ALUMINIUM SELF SUPPORTING SLIDING LADDERS, HEIGHT 36 FOOT as per latest RDSO specifications and make sumer axis, complete including handing over to the depot as per direction of Engineer |
| 184 | Supply of MAGIC POLE LADDER 8 FEET LADDER MADE OUT OF ALUMINIUM SIDE SECTION OF SIZE 66.6MM X3MM THICK WITH STEP MADE OF 25.4 MM DIA as per latest RDSO specifications and make KALCO MODEL K-7004, complete including handing over to the depot as per direction of Engineer |
| 185 | Supply of EARTH DISCHARGE ROD ASSEMBLY FOR 25KV AC TRACTION TO BE SUPPLIED ALONG WITH TWO RAIL CLAMPS, TOP CLAMP(10MM TO 20MM DIA CONDUCTOR), AND CABLE 9 METERS LONG WITH CANVAS BAG as aper RDSO specification no (ETI/OHE/51(9/87) Rev.1, Oct 2), complete including handing over to the depot as per direction of Engineer |
| 186 | Supply of DROP OUT FUSE PULL ROD as per RDSO spec No: ETI/PSI/14 (1/86) and CORE/ALD dwg. No POWER/RLY/1849, complete including handing over to the depot as per direction of Engineer |
| 187 | Supply of PORTABLE DIESEL ENGINE DRIVEN DC ARC WELDING SET of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 188 | Supply of 1/2\\" SQUARE DRIVE SOCKET SET CONTAINING 19 SOCKETS WITH 6 ATTACHMENTS as per latest RDSO specifications and make TAPARIA, complete including handing over to the depot as per direction of Engineer |
| 189 | Supply of ACIDITY TESTING KIT of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 190 | Supply of DIGITAL HIGH VOLTAGE INSULATION TESTER, RATED VOLTAGE- 5 KV as per latest specifications and make METRAVI Model-DIT-925 / MOTWANE / MECO or MEGGER or similar, complete including handing over to the depot as per direction of Engineer |
| 191 | SUPPLY OF POCKET SIZE CLIP ON TONG TESTER of approved ISI make or equivalent 677 SIGMA, complete including handing over to the depot as per direction of Engineer |
| 192 | SUPPLY OF DIGITAL TIME INTERVAL METER 15-1000 SECONDS, DISPLAY OF CHANNEL-7 SEGMENT LED TYPE, 4 DIGITS make shanti, rishabh, metravi, waco or similar , complete including handing over to the depot as per direction of Engineer |
| 193 | Supply of INSULATION TESTER 2.5KV HAND DRIVEN GENERATOR TYPE RANGE 0-5000 AND 0-5000M as per latest RDSO specifications and make PICO, complete including handing over to the depot as per direction of Engineer |
| 194 | Supply of DIGITAL EARTH TESTER WITH IN BUILT RECHARGEABLE BATTERY 3.5 DIGIT LCD DISPLAY as per latest RDSO specifications and make MOTWANE EEE-TECH / METRAVI/ WACO, complete including handing over to the depot as per direction of Engineer |
| 195 | Supply of MEGGER 500 V MEGA OHMS FOR INSULATION TESTER (HAND DRIVEN GENERATOR TYPE) as per latest RDSO specifications and make MEGGER,MOTWANE, complete including handing over to the depot as per direction of Engineer |
| 196 | Supply of SUPPLY, DEMONSTRATION AND COMMISSIONING OF TRANSFORMER OIL TESTING KIT (BDV) 1 KVA/0-100 KV RANGE MOTORIZED CUM MANUAL TYPE (DIGITAL) FOR MEASURING BREAK DOWN VOLTAGE/ DIELECTRIC STRENGTH OF INSULATING OIL USED IN TRANSFORMER /OTHER SWITCH GEARS WITH COMPLETE ACCESSORIES (TEST EQUIPMENT, OIL TEST VESSEL WITH MUSHROOM ELECTRODE ASSEMBLY, 2.5 MM GO-NO-GO GAUGE, MAIN AC CABLE OF SUITABLE LENGTH. USER MANUAL WITH TEST AND WARRANTY CERTIFICATES). TECHNICAL SPECIFICATION AS : INPUT POWER AC 220-250 V/50 HZ, OUTPUT: 0- 100 KV AC, TRIP CURRENT: MAX10-20 MA, OPERATING TEMP: 10 TO 50 DEGREE CENTIGRADE HUMIDITY: <75% NON CONSIDERING, O/P VOLTAGE RESOLUTION: 0.1 KV, ACCURACY: +2% WITH DIGITAL DISPLAY as per latest RDSO specifications and make QUADRANT, MODEL-QOITS 100 A OR SIMILAR IN SCOPE, MEGGAR OR MOTWANE, complete including handing over to the depot as per direction of Engineer |
| 197 | Supply of SUPPLY COMMISSIONING AND DEMONSTRATION OF 250 LPH PORTABLE TRANSFORMER OIL FILTRATION PLANT of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 198 | Supply of DIGITAL HIGH VOLTAGE INSULATION TESTER, RATED VOLTAGE- 250 V of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 199 | Supply of DIGITAL MULTIMETERsuitable for measuring DC Voltage up to 1000V, AC voltage upto 1000V true RMS, AC & DC current up to 10A, resistance upto 20 MΩ, diode & continuity test facility with battery, carry case and leads etc. of approved ISI make Motwane make model DM352 or equivalent, complete including handing over to the depot as per direction of Engineer |
| 200 | Supply of AUTO TRANSFORMER (VARIAC) 2A OPEN TYPE SINGLE PHASE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 201 | SUPPLY OF BATTERY TESTER ( LOAD CELL TESTER ) 2-6-12 V ; 4-500 AH of approved ISI make MECO MODEL BM63 or equivalent, complete including handing over to the depot as per direction of Engineer |
| 202 | Supply of EMERGENCY TELEPHONES of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 203 | Supply of CB TIME INTERVAL METER (DIGITAL) of approved ISI make SCOPE or equivalent, complete including handing over to the depot as per direction of Engineer |
| 204 | Supply of AUGUR (ELECTRICAL / MANUAL) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 205 | Supply of THERMO VISION CAMERA as per latest specification no SWR/PCEE/TRD/OHE-PSI/TIC, REV-0 December-2024, complete including handing over to the depot as per direction of Engineer |
| 206 | Supply of THRC METER FOR LA'S of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 207 | Supply of DEMINERALIZING PLANT (DISTILED H20 PLANT) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 208 | Supply of TDS METER of approved ISI makemode HM TDS-3, complete including handing over to the depot as per direction of Engineer |
| 209 | Supply of TRANSFORMER OIL SAMPLE BOTTLE SS 304 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 210 | Supply of MOBILE ALLUMINUM LADDER 44 FEET of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 211 | Supply of TERRA OHM METER of approved ISI make MODEL NO 3125A or equivalent, complete including handing over to the depot as per direction of Engineer |
| 212 | SUPPLY OF DIGITAL EARTH CLAMP TESTER TO MEASURE EARTH/GROUND RESISTANCE, 4 DIGIT (9999 COUNTS) LCD DISPLAY SUITABLE USE FOR RANGE : 0.01 OHM TO 1000 OHM, LEAKAGE CURRENT RANGE : 0.5MA TO 30A , AUTO POWER OFF, LONG JAW & LARGE JAW OPENING, MEMORY RECORDS : 99 SETS WITH LOW BATTERY INDICATION, OVERLOAD PROTECTION, PROTECTION LEVEL : DOUBLE INSULATION, ALONG WITH ACCESSORIES : BATTERY (INSTALLED), TEST LEAD, CARRYING BAG, USER MANUAL AND ANY OTHER NECESSARY ACCESSORY of approved ISI METRAVI MAKE, MODEL : CET-03 or equivalent, complete including handing over to the depot as per direction of Engineer |
| 213 | Supply of VACCUM CLEANER of approved ISI make AUTOMATIC ELECTRIC(AE) OR IC DOT or equivalent, complete including handing over to the depot as per direction of Engineer |
| 214 | Supply of DIGITAL HIGH VOLTAGE INSULATION TESTER, RATED VOLTAGE- 5000V of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 215 | Supply of STEEL SLING WITH EYE EACH END 19 MM DIA 4 M LONG of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 216 | Supply of MAKITA PLASTIC HANDHELD ELECTRIC BLOWER of approved ISI make MAKITA or equivalent, complete including handing over to the depot as per direction of Engineer |
| 217 | Supply of TORQUE RENCH of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 218 | Supply of CT ANALYSER (CT & PT TESTING KIT) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 219 | Supply of SULPHUR HEXAFLUORIDE GAS (SF6) WITH CYLINDER CAPACITY 11 KGS GAS DULY PROVIDED WITH CONTROL VALVE FOR 220KV/ 110KV/ 66KV/ 25KV CB/ INTERRUPTER AND CIRCUIT BREAKER of approved ISI make ABB, PGL or equivalent, complete including handing over to the depot as per direction of Engineer |
| 220 | LIST OF OHE /PSI SPARES TO BE KEPT AT SAKLESHPUR DEPOT |
| 221 | Supply of DOUBLE SUSPENSION CLAMP COMPLETE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 222 | Supply of CATENARY WIRE SUSPENSION CLAMP BODY COMPLETE WITH FASTENERS as per RDSO specification no 1160. RF/33/P/1160 , complete including handing over to the depot as per direction of Engineer |
| 223 | Supply of TUBULAR STAY ADJUSTER, 12 HOLE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 224 | Supply of TUBULAR STAY ADJUSTER(LARGE) 16 HOLE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 225 | Supply of RAISED REGISTED ARM CLMP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 226 | Supply of BRACKET TUBE CAP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 227 | SUPPLY OF REGISTER TUBE CAP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 228 | Supply of STANDARD ANTI WIND CLAMP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 229 | Supply of LARGE SUSPENSION WIRE ENDING CLAMP (20 MM.) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 230 | Supply of CONTACT WIRE SWIVEL CLIP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 231 | Supply of SWIVEL CLIP PIN of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 232 | Supply of CONTACT WIRE DROPPER CLIP (107) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 233 | Supply of CATENARY DROPPER CLIP WITH ASSEMBLY (WITH BOLT NUT, SPRING WASHER AND PIN ) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 234 | Supply of DROPPER CLIPS (49MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 235 | Supply of DROPPER CLIPS (34MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 236 | Supply of DROPPER CLIPS (25MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 237 | Supply of ALUMINIUM RIVET 6X35 MM of approved ISI make AEPL OR similar , complete including handing over to the depot as per direction of Engineer Engineer |
| 238 | Supply of ALUMINIUM RIVET 6X50MM of approved ISI make AEPL OR similar , complete including handing over to the depot as per direction of Engineer |
| 239 | Supply of MAST BRACKET FITTING ASSEMBLY 150 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 240 | Supply of MAST BRACKET FITTING ASSLY. (200) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 241 | Supply of MAST FITTING FOR HOOK INSULATOR of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 242 | Supply of BFB STEADY ARM SWIVEL of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 243 | Supply of STEADY ARM HOOK BFB of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 244 | Supply of TUBULAR STAY SLEEVE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 245 | SUPPLY OF REGISTER ARM EYE PIECE (25 MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 246 | Supply of GALVANIZED LARGE BRACKET TUBE (DIA 40/49 MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 247 | Supply of 25 MM DROP BRACKET ASSEMBLY (FORGED) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 248 | Supply of CATENARY LARGE SUSPENSION BRACKET WITH U BOLT, NUT AND SPRING WASHER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 249 | Supply of LARGE CATENARY DIRECT CLAMP ASSEMBLY of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 250 | Supply of PACKING SADDLE FOR SINGLE SUSPENSION CLAMP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 251 | Supply of CONTACT WIRE SPLICE WITH STUD BOLT OF 12X25X20 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 252 | Supply of CATENARY WIRE SPLICE (65 SQ MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 253 | Supply of CATENARY WIRE ENDING CLAMP (65 SQ MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 254 | Supply of CONTACT WIRE ENDING CLAMP (107) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 255 | Supply of LARGE SPAN WIRE ENDING CLAMP (130) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 256 | Supply of FEEDER WIRE ENDING CLAMP (150 SQ MM) as per RDSO specification no (ETI/OHE/P/1730), complete including handing over to the depot as per direction of Engineer |
| 257 | Supply of STEEL WIRE ENDING CLAMP (90) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 258 | Supply of 5MM DIAMETER HARD DRAWN ROUND COPPER DROPPER WIRE as per specification 282/1982 OR LATEST , complete including handing over to the depot as per direction of Engineer |
| 259 | Supply of 105 SQ.MM. ANNEALED COPPER STRANDED JUMPER WIRES as per RDSO specification no ETI/OHE/3(2/94) WITH A&C SLIP NO. 1 OR LATEST SPEC.,complete including handing over to the depot as per direction of Engineer |
| 260 | Supply of ANNEALED STRANDED COPPER JUMPER WIRE (50 SQ.MM) (19/1.80MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 261 | Supply of 150 SQ.MM. STRANDED COPPER CROSS FEEDER WIRE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 262 | Supply of 160 SQ.MM. ANNEALED COPPER STRANDED JUMPER WIRES of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 263 | Supply of 18 MM COPPER BUS BAR of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 264 | Supply of CADMIUM COPPER BRIDLE WIRE (20SQMM) 7/2.1 MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 265 | Supply of PG (PARALLEL GROOVE) CLAMP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 266 | Supply of CONTACT WIRE PARALLEL GROOVE CLAMP (157-65/107/150) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 267 | Supply of PG CLAMP COMPLETE WITH FASTENER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 268 | Supply of PARALLEL CLAMP (150/105-150) COMPLETE WITH FASTENERS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 269 | Supply of CONTACT WIRE PARALLEL GROOVE CLAMP PG COMPLETE SET of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 270 | Supply of CONTACT WIRE PARALLEL CLAMP (PG CLAMP) COMPLETE WITH FASTENERS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 271 | SUPPLY OF ELECTROLYTIC COPPER & ALUMINUM BI-METALIC STRIPS OF DIMENSIONS 90X35X1 MM (APPROX) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 272 | Supply of PORCELAIN STAY ARM INSULATOR ( 1050 MM CD ) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 273 | Supply of PORCELAIN BRACKET INSULATOR (1050MM CD) FOR 25KV, AC, 50 HZ, SINGLE PHASE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 274 | Supply of PORCELAIN 9-TONNE INSULATOR 1050MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 275 | Supply of 25 KV PORCELAIN SECTIONING (CORE) INSULATOR (CD 850MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 276 | Supply of POST INSULATOR FOR 25KV ISOLATOR AND BUSBAR WITH CREEPAGE DISTANCE 1050 mm of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 277 | Supply of OPERATING ROD INSULATOR FOR 25 KV ISOLATOR (C.D.850MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 278 | Supply of PTFE TYPE SHORT NEUTRAL SECTION ASSEMBLY (PHASE BREAK) as per RDSO specification no TI/SPC/OHE/SNS/0000 REV.-1 WITH A&C SLIP NO.1, complete including handing over to the depot as per direction of Engineer |
| 279 | Supply of REGULATING EQUIPMENT (ATD) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 280 | Supply of STAINLESS STEEL WIRE ROPE FOR REGULATING EQUIPMENT, 8.0 M LONG, 8.65MM DIAMETER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 281 | Supply of COUNTER WEIGHT EYE ROD 1.55 METRE LONG 20 MM DIA. OF STEEL GALVANISHED WITH NUT, WASHER AND SPLIT PIN of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 282 | Supply of GUY ROD 25MM GALVANISED COMPLETE WITH FASTNERS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 283 | Supply of ANCHOR DOUBLE STRAP ASSEMBLY of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 284 | Supply of GUY ROD DOUBLE STRAP ASSEMBLY. [150/250] of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 285 | SUPPLY OF ADJUSTER 9- TONNE (EYE AND CLEVIS TYPE) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 286 | Supply of B.C. ANCHOR LOOP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 287 | Supply of EQUALISING PLATE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 288 | Supply of COMPENSATING PLATE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 289 | Supply of DOUBLE EYE DISTANCE ROD of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 290 | Supply of ANCHOR BOLT (0.85 M) WITH NUT, LOCKNUT AND WASHERS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 291 | Supply of ANCHOR V BOLT of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 292 | Supply of GUY ROD ASSEMBLY INCLUDING MAST ANCHOR/GUY ROD ATTACHMENT FOR NORMAL ANCHOR CONSISTING OF THE EQUIPMENT MENTIONED AGAINST EACH ITEM OR LATEST IF ANY of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 293 | Supply of MAST ANCHOR FITTING (300) L=150X75X10, 390 LONG of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 294 | Supply of SS WIRE ROPE END FITTING of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 295 | Supply of COUNTER WEIGHT GUIDE TUBE 25MM (5.6 MTRS LONG) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 296 | Supply of GUY ROD STIRRUP of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 297 | Supply of FABRICATED AND GALVANIZED B SERIES STEEL STRUCTURES B- 175 MAST 9.5 MTRS LENGTH WITH APPROXIMATE WEIGHT OF 422.89 KGS. MC 175 MM X 75 MM SHALL BE USED of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 298 | Supply of FABRICATED AND GALAVANISED B SERIES STEEL MAST B-200 (50.76 KG/M) 9.50 METERS LONG WITH APPROXIMATE WEIGHT OF 482.220 KGS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 299 | Supply of 6X6 BFB DROP ARM (2.875 MTR LONG) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 300 | Supply of STAY/BRACKET CHAIR (1.3 METERS) WITH APROXIMATE WEIGHT OF 33.095 KGS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 301 | Supply of MCC EXTENSION CHAIR (1.3 METERS) WITH APROXIMATE WEIGHT OF 62.173 KGS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 302 | Supply of ATTACHMENT FOR DWARF MAST of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 303 | SUPPLY OF TWO TRACK CANTILEVER BOOM 8 MTRS LONG of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 304 | SUPPLY OF TTK1&2 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 305 | Supply of EMERGENCY MAST FOR CONVENTIONAL (NORMAL) OHE COMPLETE ASSEMBLY of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 306 | Supply of SS bolt (10x35) mm full thread with two plain washer, one spring washer and one Nyloc Nut. All bolt to IS:1364 pt-2 grade-SS 304, All plain washer IS:2016 Grade-SS304, All spring washer to IS:3063 flat sec Grade-SS304, All Nyloc Nut to IS:7002-SS304. complete including handing over to the depot as per direction of Engineer |
| 307 | Supply of Standard catenary direct clamp complete parts confirming to RDSO Drg. No. ETI/OHE/2120 Rev.B or latest & Part No. 2121, 2122, 2123 and spring washer complete including handing over to the depot as per direction of Engineer |
| 308 | Supply of GI Bolts & Nuts with Lock Nuts & Spring Washer as per Spec-TI/SPC/OHE/Fasteners/0120(2013) and RDSO Drg. No. ETI/C/0073, Mod-A 15X50X37 MM, complete including handing over to the depot as per direction of Engineer |
| 309 | Supply of GI Bolts & Nuts with Lock Nuts & Spring Washer as per Spec-TI/SPC/OHE/Fasteners/0120(2013) and RDSO Drg. No. ETI/C/0073, Mod-A 10X35X30 as per RDSO specification or latest as approved by Engineer |
| 310 | Supply of GI BOLTS OF SIZE M 16 X 40/32 WITH HOLE as per RDSO specification no.TI/SPC/OHE / Fasteners /0120 Rev-1 (march-2017 or latest), complete including handing over to the depot as per direction of Engineer |
| 311 | Supply of GI Bolts & Nuts with Lock Nuts & Spring Washer as per Spec TI/SPC/OHE/Fasteners/0120(2013) and RDSO Drg. No. ETI/C/0073, Mod-A, complete including handing over to the depot as per direction of Engineer |
| 312 | Supply of GI BOLTS OF SIZE M 16 X 60/38 WITH HOLE of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 313 | Supply of GI BOLT SIZE 16X65X38 MM as per RDSO specification no.TI/SPC/OHE / Fasteners /0120 Rev-1 (march-2017 or latest), complete including handing over to the depot as per direction of Engineer |
| 314 | Supply of GI BOLTS OF SIZE M 16 X 260/100 as per RDSO specification no.TI/SPC/OHE / Fasteners /0120 Rev-1 (march-2017 or latest), complete including handing over to the depot as per direction of Engineer |
| 315 | Supply of G.I BOLT 16X360X100 MM as per RDSO specification no.TI/SPC/OHE / Fasteners /0120 Rev-1 (march-2017 or latest), complete including handing over to the depot as per direction of Engineer |
| 316 | Supply of G.I. BOLT 20X260X100 as per RDSO specification no.TI/SPC/OHE / Fasteners /0120 Rev-1 (march-2017 or latest), complete including handing over to the depot as per direction of Engineer |
| 317 | Supply of Contact Wire Ending Clamp (107) (Wedge Type) RI No. 1118-3 & 1119-3 (SGCI Material) complete with fastners (Snap Head Pin 20/55, Punched Washer A22, Split pin copper 4x40) , as per RDSO Drg No. ETI/OHE/P/1110-2, Rev. E, Spec No. TI/SPC/OHE/FITTINGS /0130 with A&C Slip No. 1 complete including handing over to the depot as per direction of Engineer |
| 318 | Supply of Contact wire ending clamp (107) complete set with snap head pin 20 x 50 mm, split pin 4x40 & punched washer A-22 (RI No.1118-3 , 1119-3 &263) as per RDSO specification no. TI_SPC_OHE_Fittings_0130_with A_C_Slip_No_1, ETI-OHE-13 (4-84) may 2018 and Drg. No. ETI/OHE/P/1110-2 Rev E or latest, complete including handing over to the depot as per direction of Engineer |
| 319 | Supply of J BOLT (16x175x60) RI No-8033-2 as per RDSO drawing No-ETI/C/0074, complete including handing over to the depot as per direction of Engineer |
| 320 | Supply of 16MM DIA GI SPRING WASHERS as per spec. TI/SPC/OHE/FASTENERS/0120 REV 1 and drawing no. ETI/C/0075 or Latest, complete including handing over to the depot as per direction of Engineer |
| 321 | Supply of 20MM DIA GI SPRING WASHERS as per spec. TI/SPC/OHE/FASTENERS/0120 REV 1 and drawing no. ETI/C/0075 or Latest, complete including handing over to the depot as per direction of Engineer |
| 322 | Supply of Knuckle Pivot Pin With Washer as per RDSO's Drg. No.SK-62724,Alt-23 or Latest,item-4 & Spec No - WD-70-BD-10(Rev-1) specn: SK-62724, Alt.-25, Item No. 04 & STR No. WD-70-BD-2010, Rev.-1. Amendment-1, complete including handing over to the depot as per direction of Engineer |
| 323 | Supply of ADOPTER FOR SINGLE BRACKET (250, 90X90X6-230&330 LONG) AS PER RDSO SPEC NO. ETI/OHE/P/3131, complete including handing over to the depot as per direction of Engineer |
| 324 | Supply of STANDARD BACKING ANGLE (50*50*6) (RI NO: 3076-1) as per RDSO Drg No. ETI/OHE/P/3076, REV-C and RDSO SPEC No. ETI/OHE/13(4/84) with A&C 1 to 3 or latest, complete including handing over to the depot as per direction of Engineer |
| 325 | Supply of STANDARD BACKING ANGLE 200MM ID No. 3076-2.AS PER RDSO'S SPECN.NO. ETI/OHE/13 (4/84) WITH A & C SLIP NO. 1 - 3 AND RDSO'S DRG.NO. ETI/OHE/P/3076, REV-C, ID NO. 3076-2 AND IS -2062 (2011), IS:800 (1989), complete including handing over to the depot as per direction of Engineer |
| 326 | Supply of Standard backing angle (250) (RI No. 3076-3) Drg. No. ETI/OHE/P/3076 or latest, complete including handing over to the depot as per direction of Engineer |
| 327 | Supply of MULTIPLE CANTILEVER CROSS ARM (150X75, 1.25MTR) AS PER RDSO SPEC NO. ETI/OHE/P/3121 RI NO. 3121, complete including handing over to the depot as per direction of Engineer |
| 328 | Supply of MULTIPLE CANTILEVER CROSS ARM (200, 60X65X6, 450 LONG) AS PER RDSO SPEC NO. ETI/OHE/P/3121 RI NO. 3122, complete including handing over to the depot as per direction of Engineer |
| 329 | Supply of MULTIPLE CANTILEVER CROSS ARM (300, 65X65X6, 450 LONG,) AS PER RDSO SPEC NO. ETI/OHE/P/3124, RI NO. 3124, complete including handing over to the depot as per direction of Engineer |
| 330 | Supply of 25 KV 1250 AMPS SINGLE POLE ISOLATOR WITH ARCING HORNS, OPERATING RODS, OPERATING ROD GUIDES, MOUNTING BASE, INSULATORS (PIN & PEDESTAL INSULATOR SET), TERMINAL CONNECTOR RI 1009, PAD LOCK & ALUMINIUM STRIP BUT WITHOUT EARTH CONTACT ASSEMBLY WITH COMPLETE SET INCLUDING ALL SPS AND ACCESSORIES of approved ISI make or latest, complete including handing over to the depot as per direction of Engineer |
| 331 | Supply of ANGLE 75 X75 X 6 RI NO 9036 Confirming to IS 2062, complete including handing over to the depot as per direction of Engineer |
| 332 | Supply of TERMINAL CONNECTOR (19MM) MULTIPLE HOLE BOLTED TYPE WITH COMPLETE FASTENERS RI NO. 1009, complete including handing over to the depot as per direction of Engineer |
| 333 | Supply of SUSPENSION SUPPORT ANGLE 8014 as per RDSO drawing No-ETI/C/P/8014-1, complete including handing over to the depot as per direction of Engineer |
| 334 | Supply of SUPER MAST CROSS ARM 1.50M (RI. 8015)as per drawing no. ETI C P 8015, complete including handing over to the depot as per direction of Engineer |
| 335 | Supply of M S FLAT OF SIZE 40X6 MM IN LENGTH OF 6 METERS AS PER IS SPECIFICATION NO. IS 2062/2011 (7TH REV) AMENDMENT NO. 1 GRADE - E-250, complete including handing over to the depot as per direction of Engineer |
| 336 | Supply of SUSPENSION CLEVIS (18 MM), RI NO.- 1272 COMPLETE WITH FASTENERS AS PER RDSO DRG NO. RE/33/P/1270-1 REV-F OR LATEST & RDSO SPEC. NO. TI/SPC/OHE/FITTINGS/0130 (10/13) OR LATEST complete including handing over to the depot as per direction of Engineer |
| 337 | Supply of SECTION INSULATOR ASSEMBLY AS PER RDSO SPECIFICATION NO. ETI/OHE/27 [8/1984] WITH A AND C SLIP NO.1 & 2 OR LATEST, complete including handing over to the depot as per direction of Engineer |
| 338 | SUPPLY OF 25KVA, 25KV/240V, 50HZ SINGLE PHASE OIL FILLED AUXILIARY TRANSFORMER as per RDSO specification No. ETI/PSI/15 (08/2003) or latest revision, complete including handing over to the depot as per direction of Engineer |
| 339 | Supply of 10 KVA,25 KV/240 VOLT OIL FILLED OUT DOOR TYPE SINGLE PHASE AUXILIARY TRANSFORMER CONFIRMS TO RDSO SPECIFICATION NO - ETI/PSI/15(08/2003) OR LATEST IF ANY, complete including handing over to the depot as per direction of Engineer |
| 340 | SUPPLY OF 5 KVA AUXILIARY TRANSFORMER 25 KV/240V, 50HZ SINGLE PHASE OIL FILLED AUXILIARY TRANSFORMER FOR RAILWAY AC TRACTION SYSTEMS CONFIRMS TO RDSO SPECIFICATION NO - ETI/PSI/15(08/2003) OR LATEST IF ANY, complete including handing over to the depot as per direction of Engineer |
| 341 | Supply of HORN LINK FOR DROP OUT FUSE ASSEMBLY as per RDSO specification no (ETI/PSI/14(1/86) Rev 1 (Apr-87) complete including handing over to the depot as per direction of Engineer |
| 342 | Supply of HORN LINK, 01 AMP. NICHROME FUSE ELEMENT SUITABLE FOR 25 KV DO FUSE SWITCH ASSEMBLY AS PER DRG. NO.ETI/PSI/032 AND RDSO SPEC. NO. ETI/PSI/14(1/86) REV 1(APRIL-87) OR LATEST IF ANY.ONLY APPROVED FROM CORE VENDORS, complete including handing over to the depot as per direction of Engineer |
| 343 | Supply of 25 KV SINGLE POLE VACUUM INTERRUPTER (BM) SPEC. NO - TI/SPC/PSI/LVCBIN/ 0120 (DEC-2013) VER.0. WITH A&C SLIP NO.1 (OCT. 2016) OR LATEST. MAKE RDSO APPROVED VENDORS, complete including handing over to the depot as per direction of Engineer |
| 344 | Supply of 25 KV OUT DOOR TYPE SINGLE PHASE OIL COOLED CURRENT TRANSFORMER RATIO 1500-750/5A AS PER RDSO SPECIFICATION TI/SPC/PSI/CT/0210(07/2021), complete including handing over to the depot as per direction of Engineer |
| 345 | Supply of 25 KV POTENTIAL TRANSFORMER TYPE - I OF RATIO 27.5KV /100V AS PER RDSO'S SPEC. NO. TI/SPC/PSI/PT/0210(06/2021). MAKE :-CORE APPROVED VENDOR, complete including handing over to the depot as per direction of Engineer |
| 346 | Supply of 25 KV POTENTIAL TRANSFORMER TYPE - II OF RATIO 27.5KV/110V AS PER RDSO'S SPEC. NO TI/SPC/PSI/PT/0210(06/2021). MAKE: -CORE APPROVED VENDOR MAKE/BRAND: M/s. SCT Limited/Ghaziabad, complete including handing over to the depot as per direction of Engineer |
| 347 | Supply of 25 KV NEUTRAL CURRENT TRANSFORMER WITH TERMINAL CONNECTORS, (RATIO 5/1 A) as per RDSO specification no. TI/SPC/PSI/CT/0210(07/2021). Make- RDSO/CORE Approved Sources Only, complete including handing over to the depot as per direction of Engineer |
| 348 | Supply of EARTH ELECTRODE OF 4 MTRS LENGTH SPEC: TI_SPC_OHE_FITTINGS_0130_WITH A_C_SLIP_NO_1, ETI-OHE-13 (4-84) MAY 2018, DRW: ETI PSI 222.MAKE :-CORE APPROVED VENDOR, complete including handing over to the depot as per direction of Engineer |
| 349 | Supply of EARTH ELECTRODE 3.1 METER LONG CONFIRMING TO RDSO DRG.NO. ETI/P/7021 REV A AND RI NO.7021. ONLY FROM CORE APPROVED VENDORS, complete including handing over to the depot as per direction of Engineer |
| 350 | Supply of Tripping Coil part no. TC/D for 25KV outdoor Single pole Alind VCB type VSE 5/20, CM type BLR80 ME OR LATEST, complete including handing over to the depot as per direction of Engineer |
| 351 | Supply of SILICA GEL ORANGE, SPHERICAL BEADS WITHOUT COBALT OF SIZE 3 TO 5 MM AS PER RDSO SPEC, complete including handing over to the depot as per direction of Engineer |
| 352 | Supply of SILICA GEL BREATHER OF POLY CARBONATE CLEAR TYPE (500GM) FOR 10 KVA AUXILIARY TRANSFORMER AS PER RDSO SPEC. ETI/PSI/15 (08/2003).MAKE: RDSO APPROVED MANUFACTURER OF 10KVA AT, complete including handing over to the depot as per direction of Engineer |
| 353 | Supply of CB TRIPPING COIL 25 KV, complete including handing over to the depot as per direction of Engineer |
| 354 | Supply of CLOSING COIL 25 KV, complete including handing over to the depot as per direction of Engineer |
| 355 | Supply of SPRING CHARGING MOTOR WITH CATCH (M/218) for 25 KV Single Pole Outdoor Vacuum Interrupter type VSE 5/8 RDSO Spec. No. ETI/PSI/(09/97), complete including handing over to the depot as per direction of Engineer |
| 356 | Supply of AUXILIARY SWITCH (8 NO + 8 NC ) WITH CRANK PART NO. AS/S OF ALIND MAKE FOR 25 KV AC SINGLE POLE OUTDOOR VACUUM CIRCUIT BREAKER TYPE VSE 5/20, complete including handing over to the depot as per direction of Engineer |
| 357 | SUPPLY OF MOTOR LIMIT SWITCH (3 NO+3 NC) WITH CRANK FOR 25 KV VACUUM CIRCUIT BREAKER/ INTERRUPTER AS PER MANUAL PART NO: LS/IN OF MAKE: ALIND OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 358 | Supply of ANTI - PUMPING RELAY ( A P) 25 KV as per RDSO approved spec or latest, complete including handing over to the depot as per direction of Engineer |
| 359 | Supply of LOCAL REMOTE SELECTOR SWITCH Part No. LR of Alind for 25 KV Single Pole VCB (VSE 5/8 & VSE 5/20, complete including handing over to the depot as per direction of Engineer |
| 360 | Supply of CAPACITOR TRIPPING DEVICE OF RATING 110 V DC FOR 25KV VCB TYPE VSE 5/20 of approved ISI make or latest, complete including handing over to the depot as per direction of Engineer |
| 361 | Supply of SF-6 GAS CYLINDER WITH 11 Kgs. SF-6 GAS IN EACH CYLINDER of approved ISI make or latest, complete including handing over to the depot as per direction of Engineer |
| 362 | SUPPLY OF SF-6 GAS CYLINDER WITH FILLING ARRANGEMENT(REGULATOR)-11 KG suitable for CGL make CBs / interrupter conforming to IES: 60374 (2005) OR Latest, complete including handing over to the depot as per direction of Engineer |
| 363 | Supply of VACUUM BOTTLE INTERRUPTER SUITABLE FOR 1250 AMP VMX TYPE VCB TROLLEY OF SCHNEIDER MAKE SIMILAR TO MODEL V207 SIEMENS, ABB, SCHNEIDER OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 364 | SUPPLY OF SUPPORT INSULATOR (LOWER) FOR 25 KV VACUUM CIRCUIT BREAKER/INTERRUPTER Makes of IEC,Modern and BHEL for the ALIND make CB as mentioned in the drawing, complete including handing over to the depot as per direction of Engineer |
| 365 | Supply of 25 KV DROP OUT FUSE INSULATED OPERATING ROD AS PER RDSO SPECN. NO. ETI/PSI/14(1/86) WITH A & C SLIP NO. 1 (4/87) MAKE: IM OR SIMILAR, CORE APRV DRG. IM.118/04 OR SIMILAR, complete including handing over to the depot as per direction of Engineer |
| 366 | SUPPLY OF GASKET COMPLETE SET FOR THE ASSEMBLY OF ONE POLE (12,14-1 NO. EACH &13, 23-2 NO. EACH ) suitable for M/s-ALIND make 25 kV Vacuum Circuit Breaker/Interrupter, complete including handing over to the depot as per direction of Engineer |
| 367 | SUPPLY OF ELEMENT,AIR FILTER (Item Code A062U578) Make Cummins Only, complete including handing over to the depot as per direction of Engineer |
| 368 | Supply of HEATEC STAINLESS STEEL RECTANGULAR HEATER ELEMENTS, 1000-2000 WATT of approved ISI make or latest, complete including handing over to the depot as per direction of Engineer |
| 369 | Supply of INTERLOCK TYPE ILB/71MM/10-30/CW-90 DEGREE WITH RT KEY FOR OHE ISOLATOR (2 LOCK+2KEY SET) of approved ISI make or latest, complete including handing over to the depot as per direction of Engineer |
| 370 | Supply of BUCHHOLZ RELAY AS PER BHEL DRG. NO. E-6250029 P16, ACS-6002, FIG. REF. 000 OR latest complete including handing over to the depot as per direction of Engineer |
| 371 | Supply of NUMERICAL INTEGRATED FEEDER PROTECTION RELAY TYPE- ANZ 214 FOR 2 x 25 KV CONTROL & RELAY PANEL OF 2X25 KV TSS EQUIVALENT AS PER RDSO SPEC No:TI/SPC/PSI/PROTCT/7101 OR LATEST. Make- Alind (Type: ANZ 214), complete including handing over to the depot as per direction of Engineer |
| 372 | Supply of MASTER TRIP RELAY AS PER RDSO SPEC. NO. TI/SPC/PSI/PROTCT/6071 WITH A&C SLIP NO. 1 OR LATEST, complete including handing over to the depot as per direction of Engineer |
| 373 | Supply of 42 KV, 10 KA, METAL OXIDE GAPLESS TYPE LIGHTENING ARRESTOR AS PERRDSO'S SPEC. NO. - TI/SPC/PSI/MOGTLA/0101(02/15). complete including handing over to the depot as per direction of Engineer |
| 374 | Supply of 20 MM. STRAIN CLAMP COMPLETE, AS PER RDSO DRG. NO. ETI/OHE/P/1600 REV-D, RI-1601-3 OR LATEST. complete including handing over to the depot as per direction of Engineer |
| 375 | SUPPLY OF RELAY TESTING KIT SUITABLE FOR TESTING OF OVER CURRENT RELAYS (DIRECTIONAL / NON - DIRECTIONAL), FREQUENCY RELAYS, (OVER, UNDER & DF/DT), POWER RELAYS ,VOLTAGE RELAYS (OVER, UNDER & OVER FLUXING), DISTANCE RELAYS, DIFFERENTIAL RELAYS, WRONG PHASE COUPLING, SINGLE PHASE RELAYS (TRANSFORMER, MOTOR, GENERATOR, LINE, BUS BAR), AUTO-RECLOSE RELAYS, , HIGH IMPEDANCE EARTH-FAULT (RELAYS, FOR , EARTH FAULT RELAY, SINGLE PHASE RELAY SUITABLE FOR TESTING OF NUMERICAL RELAY/ MICROPROCESSOR /STATIC of approved ISI make or latest, complete including handing over to the depot as per direction of Engineer |
| 376 | Supply of CANTILEVERS HIGH SPEED COMPLETE SET (2.8 M IMP - 6 NOS., 3.10 IMP - 6 NOS, 3.50 M IMP-4 NOS,4.0 M IMP - 4 NOS) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 377 | Supply of SPECIAL TYPE CANTILEVER ASSEMBLY FOR TUNNEL of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 378 | Supply of LS WIRE (130 SQ MM) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 379 | Supply of MAST ANCHOR ATTACHMENT 200MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 380 | Supply of ANCHOR BACKING ANGLE 200MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 381 | Supply of MAST GUY ROD ATTACHMENTS 300MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 382 | Supply of ANCHOR BACKING ANGLE 300MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 383 | Supply of ANCHOR ADOPTER 550M of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 384 | Supply of MAST B-150, 9.50 METERS LONG WITH APPROXIMATE WEIGHT OF 369.69 KGS of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 385 | Supply of N-PORTAL UPRIGHT'S of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 386 | Supply of N PORTAL END PIECE 5.88M (NE-2) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 387 | Supply of N PORTAL CENTRAL PIECE 9.0M of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 388 | Supply of O-PORTAL UPRIQHT'S of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 389 | Supply of O PORTAL END PIECE 11.05M (OE-2) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 390 | Supply of O PORTAL CENTRAL PIECE 9.0M of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 391 | Supply of N PORTAL KNEE BRACE (NK) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 392 | Supply of O PORTAL KNEE BRACE (OK) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 393 | Supply of N PORTAL COVERING ANGLE (NC) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 394 | Supply of O PORTAL COVERING ANGLE (OC) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 395 | Supply of BRIDGE MAST WITH ACCESSORIES (AS PRQVIDED IN THE SECTION) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 396 | Supply of PORTAL BRACKET ATTACHMENT of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 397 | Supply of FRONT CLAMPING ANGLE (N TYPE PORTAL) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 398 | Supply of FRONT CLAMPING ANGLE (O TYPE PORTAL) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 399 | Supply of 8X6 RSJ DROPARM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 400 | Supply of CLAMPING ANGLE FOR N TYPE PORTAL of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 401 | Supply of CLAMPING ANQLE FOR O TYPE PORTAL of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 402 | Supply of MULTIPLE CANTILEVER EXTENSION CHAIR 2.60M of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 403 | Supply of DWARF MAST 3.85M (B-SERIES TYPE) of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 404 | Supply of TTU of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 405 | Supply of TTB 5.5 m of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 406 | Supply of CLAMPING ANGLE 55X65X5 FOR TTC BOOM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 407 | Supply of TTC 10 METER of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 408 | Supply of BFB & RSJ DROP ARM LONG LENGTH of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 409 | Supply of ADAPTOR 200MM - 3131-1 of approved ISI or equivalent, complete including handing over to the depot as per direction of Engineer |
| 410 | Supply of ADAPTOR 300MM - 3131-3 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 411 | Supply of BACKINQ ANGLE -300MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 412 | Supply of BACKINQ ANGLE -550MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 413 | Supply of BACKINQ ANGLE -600MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 414 | Supply of MCC CLAMP - 280mm of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 415 | Supply of ANGLE 75 X75 X 6 & 90 X 90 X6 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 416 | Supply of CHANNEL 150 X75 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 417 | Supply of INSULATOR MOUTING CHANNEL ISMC 100 X 0.33M of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 418 | Supply of GUIDE TUBE ATTACHEMENT of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 419 | Supply of GUIDE TUBE ANGLE of approved ISI make of equivalent, complete including handing over to the depot as per direction of Engineer |
| 420 | Supply of LONG SUPER MAST CHANNEL WITH NORMAL AND LONG CROSS ARM 5 SET EACH of approved ISI make or equivalen, complete including handing over to the depot as per direction of Engineer |
| 421 | Supply of MEDIUM SUPER MAST CHANNEL WITH NORMAL AND LONG CROSS ARM 5 SET EACH of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 422 | Supply of SHORT SUPER MAST CHANNEL WITH NORMAL AND LONG CROSS ARM 5 SET EACH of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 423 | Supply of BATTEN PLATE TYPE - I of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer Engineer |
| 424 | Supply of BATTEN PLATE TYPE -2 of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 425 | Supply of 25 KV 1250 Amps Single Pole Isolator as per RDSO Spec. TI SPC PSI ISOLTR 0210 or latest with arcing horns, operating rods, operating rod guides, mounting base, Insulators (pin & pedestal insulator set), Terminal connector RI 1009, Pad Lock & Aluminium Strip but without Earth contact assembly with complete set including all SPS and accessories, complete including handing over to the depot as per direction of Engineer |
| 426 | Supply of 25 KV VACCUM Circuit breacker AS PER RDSO or latest, complete including handing over to the depot as per direction of Engineer |
| 427 | Supply of LIGHTNING ARRESTERS HV SIDE AS PER VOLTAGE LEVEL of approved RDSO make or latest, complete including handing over to the depot as per direction of Engineer |
| 428 | 96 Kv |
| 429 | 120 Kv |
| 430 | 198 Kv |
| 431 | Supply of HV SIDE CB AS PER VOLTAGE LEVEL of approved ISI make or latest, complete including handing over to the depot as per direction of Engineer |
| 432 | 220 Kv SF-6 |
| 433 | 110 Kv SF-6 |
| 434 | Supply of CONTACT WIRE (FULL DRUM) 107 SQ.MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer |
| 435 | Supply of CATENARY WIRE (FULL DRUM) 65 SQ.MM of approved ISI make or equivalent, complete including handing over to the depot as per direction of Engineer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender