Tender For maintenance of Completed Scheme Under N/A-Ii Horticulture Zonesub-Head : Improvement And Repair Of Boundary Wall, Footpath Including providing and Fixing Signage, Dustbins, And Other Miscellaneous Works At Rattan Wala Park Under Hcd-5/Dda
Tender Value
26.52 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
4 days left
EMD
53054
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Completed Scheme Under N/A-Ii Horticulture Zonesub-Head : Improvement And Repair Of Boundary Wall, Footpath Including providing and Fixing Signage, Dustbins, And Other Miscellaneous Works At Rattan Wala Park Under Hcd-5/Dda
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | 12 mm cement plaster of mix : |
| 3 | 1:6 (1 cement: 6 coarse sand) |
| 4 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 5 | 1:6 (1 cement: 6 coarse sand) |
| 6 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : |
| 7 | In cement mortar |
| 8 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 9 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 10 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 11 | In cement mortar |
| 12 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 13 | All kinds of soil. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 15 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 17 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 18 | Random rubble masonry with old hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). (Material to be provided free of cost by the department)(Analysis based on DSR Item No. 7.1.1) |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 20 | a) Foundations, footings, bases for columns. |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 22 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 23 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : |
| 24 | Raised and cut pointing |
| 25 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 26 | (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 27 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 28 | (a) Made of G.I. wire of dia 4 mm |
| 29 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush. |
| 30 | Red sand stone |
| 31 | Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 32 | Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer -in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). |
| 33 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 34 | Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate, moorum and red bajri required. |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 36 | Two or more coats on new work. |
| 37 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 38 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 39 | Providing double stand plastic branded dustbin manufactured from standard manufacturer like Neelkamal or equivalent with the following criteria. Size:-800x800mm(T) X 600x600mm(B) X 900mm (Ht.) (Approx.) Main frame:- made of branded square pipe with high standard wire gauge & Tensile strength. Capacity-60 Ltr. each (Pair of 2 nos. dustbins)Components:-Srews& Hinges to be used and at the contact points to enchance its security.Accessories:- All nut & bolts, hinges as per IS stanbdards approved & used for assembly will be ISI approved of Galvanized iron/ MS with High tensile strength. Colour:- Blue + Olive Green. Paint:- All assembly should be painted with anti-corrosive paint to give smooth surface to the assembly. The work should be executed as per direction of Engineer-in-Charge. |
| 40 | Excavating holes more than 0.10 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto1.5 m. |
| 41 | All kinds of soil. |
| 42 | Credit to department against disposal of old Steel/ Iron or equivalent material obtained from site. (Actual Qty of issue will be as prevails on site stocks. Contractor has binded to take all balance material from site.) |
| 43 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). (A) Small signage board. |
| 44 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 45 | Total ₹ 26,47,000.00 |
| 46 | Total (DSR Items: Except M/R item no. 23 & 25) \\"A\\" =₹ 26,00,246.00 |
| 47 | Total after applying GST Correction Factor @0.973 ON DSR Items \\"B=A*0.973\\" =₹ 25,30,039.00 |
| 48 | Cost Index on \\"B\\"@ 3% \\"C\\" |
| 49 | G. Total ( i/c GST Correction and CI on DSR Items and M/R items) (\\"D\\"=\\"B\\"+\\"C\\")= ₹ 26,52,694.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender