Tender For Beautification Work Of Parks Of Sector-2 Under Canal Front Beautification Of Greater Bareilly Housing Scheme.
Tender Value
23.92 Crore
Estimated cost
Bid Submission
24 Sep 2026
25 days left
EMD
47.85 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Work Of Parks Of Sector-2 Under Canal Front Beautification Of Greater Bareilly Housing Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.D.S.R. Item No. 2.8.1 |
| 2 | Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 |
| 3 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M25 grade with minimum cement content of 350 kg /cum All works upto plinth level RCC as in fdns and footings of colums and plinth beam and bases of column. DSR Item No. 5.33.1.1 |
| 4 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum (level 1 to lvl-5) D.S.R. Item No. 5.33.2.1 |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources)..DSR Item No. 4.2.2 |
| 6 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for footings/PB, rough finished surface of conc. D.S.R. Item No. 5.9.1 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roof , landings, balconies, acessess platformD.S.R. Item No. 5.9.3 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.D.S.R. Item No. 5.9.2 |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel Beams, Plinth Beams, Girders, bressumers and cantiliversD.S.R. Item No. 5.9.5 |
| 11 | Brick work in SUPER STRUCTURE in 23 cm thk wall with 1:4 cement and coarse sand incl. all materials labour annd t&p etc. for proper completion of work.D.S.R. Item No. 6.4.1 |
| 12 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksD.S.R. 2023 Item No. 10.1 |
| 13 | 12 mm thk plaster (1:4) with cement & Coarse Sand (Fair Face)D.S.R. Item No. 13.4.1 |
| 14 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 15 | Finishing walls with Acrylic Smooth exterior paint of required shade :-New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.).D.S.R. Item No. 13.46.1 |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new workD.S.R. 13.62.1 |
| 17 | Construction of granular sub base (G.S.B.) by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compete at per clause 401. (Analysis Rate) |
| 18 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.D.S.R. 2023 Item No. 16.91.2 |
| 19 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approvedby Engineer-in-charge).D.S.R. Item No. 16.69 |
| 20 | Providing and laying in position specified grade of cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)D.S.R. Item No. 5.1.3 |
| 21 | Earth Filling including cartageEarth work cutting on in embankment in ordinary soil earth work in embankment to be in 20cm layers including watering dressing and compacting the soil to achieve 95% proctor density and also including the surface required level and slops and also including lift 1.50m and lead 8km.Analysis Rate |
| 22 | C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.3 |
| 23 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) D.S.R. ITEM NO. 5.1.2 |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, plascing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. D.S.R. Item No. 5.22.6 |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for columns, pillers, piesr, abutment , post and strutsD.S.R. Item No. 5.9.6 |
| 26 | Brick work with common burnt clay modular bricks of class designation 15 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)D.S.R. 2023 Item No. 6.2.1 |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:D.S.R. Item No. 10.2 |
| 28 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing balcony railing & staircase railing including applying a priming coat of approved steel primer.M.S. tube.D.S.R. Item No. 10.26.1 |
| 29 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT.The rate includes the concept design, detaileddesign, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above. 1.00 mm thick with zinc coating not lessthan 275 gm/m²D.S.R. Item No. 12.1.1 |
| 30 | Providing and fixing factory fabricated faceted geometric façade panels made of 2.5 mm to 4 mm thick High Pressure Laminate (HPL) / 3 mm thick solid aluminium sheet / 8–10 mm thick fibre cement board (as specified), cut into required geometric shapes (triangular / polygonal facets) using CNC cutting, bending and edge forming to achieve desired 3D faceted pattern.Panels shall be finished with PVDF coating (min. 25–35 microns for ACP/aluminium) / exterior grade weatherproof paint (for fibre cement board) of approved shade and make.The item includes:Providing and fixing supporting framework made of extruded aluminium sections / GI square tubes (min. 25x25x1.6 mm or as required)Framework fixed to RCC/masonry surface using approved anchor fasteners / dash fasteners / chemical anchorsProviding necessary brackets, cleats, spacers, and stiffeners for proper alignment and load transferFixing of panels using SS screws, rivets, or concealed fixing system as per designProviding weatherproof silicone sealant in joints and groovesEnsuring proper slope, alignment, and waterproofing treatmentIncluding scaffolding, lifting, cutting, wastage, transportation, labour, T&P completeAll work shall be executed as per approved shop drawings, façade design, and direction of Engineer-in-Charge.Market Rate |
| 31 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of size 600x1200mmD.S.R. Item No. 11.41A.2.2(Make : Simpolo/RAK) |
| 32 | Antiskid tilesProviding and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size600 x 600 mm (Make : Simpolo/RAK)DSR 11.41A.3.1 |
| 33 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make : Simpolo/RAK)DSR 8.31 |
| 34 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Granite stone slab of colour black, Cherry/Ruby red D.S.R. Item No. 8.2.2.2 |
| 35 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. D.S.R. Item No . 8.5 |
| 36 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.DSR 9.76 |
| 37 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.DSR 9.77 |
| 38 | Providing and fixing factory made uPVC white colour sliding glazed door/window comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainlesssteel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (Make : Fenesta)Two track four panels sliding door made of (big series) frame67 x 50 mm & sash 46 x 82 mm both having wall thicknessof 2.3 ± 0.2 mm and single glazing bead / double glazingbead of appropriate dimension. (Area of door above 8.00sqm upto 10.00 sqm). sqm D.S.R. Item No. 9.147.A2.2 |
| 39 | Float glass panes of nominal thickness 6 mm (weight not less than 20.00 kg/sqm)(Make : as provided by Fenesta)DSR 2618 |
| 40 | Providing and fixing 12 mm toughened/laminated safety glass with approved aluminium/SS/MS framing, including cutting, edge polishing, gaskets, structural silicone sealant, fasteners, brackets and complete installation as approved.D.S.R. Item No. 21.18 |
| 41 | Providing and fixing laser cut Acrylic Backlit letters (Acrylic Font) With LED backlit illumination made from approved quality cast acrylic sheet of required thickness (minimum 3–5 mm or as specified) for signage/branding work, including cutting as per approved design, polishing of edges, drilling holes, and fixing on wall surface with SS studs, spacer, adhesive or suitable fixing arrangement, complete in all respects including alignment, finishing, and cleaning as directed by Engineer-in-Charge.The rate shall include all materials, labour, tools, scaffolding, transportation, wastage, and installation complete as per approved drawing and site requirements.Text 1 : GREATER BAREILLY CANAL FRONT DEVELOPMENTText 2 : CANAL WALKWAYMarket Rate |
| 42 | Providing and fixing Bareilly Development Authority Logo with LED backlit illumination made of approved material including fabrication, LED modules, driver, wiring and fixing complete as per approved design and direction of Engineer-in-Charge.Size: 1000x1000mmMarket Rate |
| 43 | Providing and applying exterior-grade architectural texture coating to GRC/GFRC/FRP surfaces, including surface preparation, approved primer/sealer, texture coat, filler, weather/UV-resistant protective top coat, scaffolding, labour, tools and all complete as per approved colour and finish.Market Rate |
| 44 | Providing and applying exterior-grade PU/metallic decorative finish to FRP/GFRP/GRC flowers and feature elements, including surface preparation, compatible primer, metallic PU coating, required coats, UV/weather-resistant clear protective coat, labour, scaffolding, tools and complete finishing as approved.Market Rate |
| 45 | Providing and fixing decorative vines, stems and leaves in FRP/GFRP/GRC, including moulding, internal supports, fixing accessories, surface preparation, primer, exterior-grade paint/finish and complete installation as approved.Market Rate |
| 46 | Providing and fixing large outdoor decorative giraffe sculpture made of FRP/GFRP with internal MS framework, including fabrication, moulding, anchorage, exterior-grade primer and paint, UV/weather-resistant protective coating, transportation, lifting, installation and all necessary supports, complete as approved.Market Rate |
| 47 | Providing and fixing large 3D decorative flower sculptures in FRP/GFRP with internal MS support framework, including moulding, fabrication, reinforcement, anchorage, surface preparation, primer, exterior-grade PU/metallic finish, UV/weather-resistant protective coating, transportation, lifting, installation and all necessary accessories, complete as approved.Market Rate |
| 48 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.PWD SOR Item No. 255 |
| 49 | Class 150 Brick work in 1:3 cement and Coarse Sand of 1.25 finentss modulusbut in Parapet including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cms.D.S.R. Item No. 6.13.1 |
| 50 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)D.S.R. 13.5.1 |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primerD.S.R. Item No. 13.41.1 |
| 52 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)D.S.R. Item No. 10.15.1 |
| 53 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsD.S.R. Item No. 9.21.1 |
| 54 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)On one side onlyD.S.R. Item No. 9.22.1 |
| 55 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new workD.S.R. 13.62.1 |
| 56 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:D.S.R. 1.21.1, 20 mm Dia |
| 57 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:D.S.R. 1.21.2, 25 mm Dia |
| 58 | Providing and fixing of junction box 200 x 250 mmSI No 154/elctrical SOR 2018 |
| 59 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick.D.S.R. Item No. 11.26.1 |
| 60 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite workD.S.R. Item No. 8.3.2 |
| 61 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregateD.S.R. Item No. 11.3.1 |
| 62 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: DSR 22.7.1(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm.D.S.R. 22.7.1 |
| 63 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. No.12.22 |
| 64 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.PWD SOR Item No. 255 |
| 65 | Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to 1S:2185 (Part 3) in super structure above plinth floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). D.S.R. Item No. 6.47 |
| 66 | Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. completeD.S.R. 13.78 |
| 67 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.D.S.R. Item No. 13.45.1 (Rate: 223.60x0.735x109/107)+1%=169.09) |
| 68 | Supply and fixing of Facade system with panel sizes of 250mmx 3850mm. Panel Specifications:Panel Sizes: 250mm x 3850mmMaterial: Polymer based material with thermal printingCharacteristics: Durable, moisture-resistant, water-resistant, and resistant to borer-fungus-termite attacks.Installation Requirements:Panels to be installed using Aluminium sections (1mm thick)1. 50 x 25 x 1mm – vertical framing2. 38 x 38 x 1mm – horizontal framing3. Self drill screw for L clamp and AL channels4. Anchor fasteners to fix aluminium channel on wall 6-8 thick5. Truss flat head screw – panels and trims 8mm dia, 25mm lengthAccessoriesSV 15 with dimensions 40x19x22x12x3050 (all in mm) for edge profiles SV 18 with dimensions 67x3050 mm with T head of 42mm for Connecting profilesSV 11 with dimensions 46x3050mm starter trimSV 11.5 with dimensions 40x44x3050mm ventilation trimSV 12 wih dimensions 76x76x3050mm exterior trimSV 13 with dimensions 31x3050mm interior trimMaintenance and Durability:Panels must be maintenance-free and rust-proof.100% water-proof properties to be ensured. 10 years warranty for colour & finish of the panels and the profiles.Make : VOX (SXP-05 MAX 3 EXTERIOR)MARKET RATE |
| 69 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @0.75 ltr /10 sqmD.S.R. Item No. 13.48.1 (Rate: 193.70x0.735x109/107)+1%=146.48) |
| 70 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement cum fixed panel window having both end singlecasement panel, middle fixed panels and at top completelyfixed ventilator with S.S friction hinges (350 x 19 x 1.9)made of (big series) frame 67 x 60 mm , sash 67 x 80 mm& mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2mm and single glazing bead/double glazing bead ofappropriate dimension. (Area of window above 3.00 sqmupto 5.00 sqm).D.S.R. 9.147.E4.3 (Rate: 10212.60x0.735x109/107)+1%=7723.03) |
| 71 | Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm)(Make : as provided by Fenesta)DSR 2408 (Rate: 641.00x0.735x109/107)+1%=484.74) |
| 72 | Providing and fixing of junction box 200 x 250 mmPWD SI No 154 elctrical SOR 2018 |
| 73 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks) D.S.R. 12.45.2 |
| 74 | Providing and fixing Stainless Steel H Shape Door HandlePS (As per Convention Center BOQ) |
| 75 | Providing & Fixing Floor Lock PS (As per Convention Center BOQ) |
| 76 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. DSR ITEM NO. 9.82 (Rate: 121.65x0.735x109/107)+1%=91.99) |
| 77 | Providing and fixing factory fabricated faceted geometric façade panels made of 2.5 mm to 4 mm thick High Pressure Laminate (HPL) / 3 mm thick solid aluminium sheet / 8–10 mm thick fibre cement board (as specified), cut into required geometric shapes (triangular / polygonal facets) using CNC cutting, bending and edge forming to achieve desired 3D faceted pattern.Panels shall be finished with PVDF coating (min. 25–35 microns for ACP/aluminium) / exterior grade weatherproof paint (for fibre cement board) of approved shade and make.The item includes:Providing and fixing supporting framework made of extruded aluminium sections / GI square tubes (min. 25x25x1.6 mm or as required)Framework fixed to RCC/masonry surface using approved anchor fasteners / dash fasteners / chemical anchorsProviding necessary brackets, cleats, spacers, and stiffeners for proper alignment and load transferFixing of panels using SS screws, rivets, or concealed fixing system as per designProviding weatherproof silicone sealant in joints and groovesEnsuring proper slope, alignment, and waterproofing treatmentIncluding scaffolding, lifting, cutting, wastage, transportation, labour, T&P completeAll work shall be executed as per approved shop drawings, façade design, and direction of Engineer-in-Charge.Market Rate |
| 78 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.D.S.R. Item No. 2.8.1 |
| 79 | Providing including hoisting, fixing in position Badminton Net with steel cable of approved brand at hight of 2.38 meter & Fixing of net pole in depth of 0.5 to 0.8 meter with Cement Concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm size) and refilling etc complete.Market Rate |
| 80 | Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 |
| 81 | Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the workD.S.R. Item No. 6.2.1 |
| 82 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 |
| 83 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverableseparately).D.S.R. Item No. 16.75 |
| 84 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.On concrete workD.S.R. 13.52.2 |
| 85 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick in 5 number of concrete segmentD.S.R. 11.13.1 |
| 86 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.D.S.R. Item No. 2.8.1 |
| 87 | Earth Filling including cartageEarth work cutting on in embankment in ordinary soil earth work in embankment to be in 20cm layers including watering dressing and compacting the soil to achieve 95% proctor density and also including the surface required level and slops and also including lift 1.50m and lead 8km.Analysis Rate |
| 88 | Construction of granular sub base (G.S.B.) by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compete at per clause 401. (Analysis Rate) |
| 89 | Providing, supplying, fabricating and erecting complete Cricket Practice Netting System of approved quality, including UV-stabilized HDPE/polypropylene cricket net of specified mesh size and GSM, supported on heavy-duty GI/MS vertical posts and horizontal/top support members, complete with GI/MS structural framework, tension wires/ropes, clamps, hooks, eye bolts, turnbuckles, net fixing accessories and required bracing, including excavation of post foundations, providing and laying PCC/RCC foundation, fixing and alignment of posts, tensioning and securing of net, painting/galvanizing of steelwork, transportation, loading, unloading, labour, tools, tackles, testing and all incidental works, complete as per approved drawings/specifications and direction of Engineer-in-Charge.Recommended Specification:Net: UV-stabilized HDPE/PolypropyleneMesh: 2.5 mm to 3.0 mm or as approvedMesh opening: approximately 25 mmSupport posts: Heavy-duty GI/MSFramework: GI/MS structural sectionsFoundation: PCC/RCC as per structural requirementNet height: Minimum 3.0 m, or as per approved cricket-practice layoutComplete with tensioning and fixing accessoriesFinish: Hot-dip galvanized or approved anti-corrosion paint system |
| 90 | Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 |
| 91 | Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the workD.S.R. Item No. 6.2.1 |
| 92 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 |
| 93 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverableseparately).D.S.R. Item No. 16.75 |
| 94 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.On concrete workD.S.R. 13.52.2 |
| 95 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.D.S.R. Item No. 2.8.1 |
| 96 | Providing, supplying, erecting and fixing complete Volleyball Net System of approved quality, comprising regulation-size volleyball net made of high-strength UV-stabilized HDPE/polypropylene or nylon mesh with reinforced top and bottom bands, complete with heavy-duty MS/GI volleyball net posts/poles of suitable diameter and thickness, including ground sleeves where required, adjustable height mechanism, steel wire rope/cable, winch/tensioning arrangement, turnbuckles, clamps, hooks, eye bolts, brackets, caps and all necessary fixing hardware, including excavation of pits, providing and laying Cement Concrete 1:3:6 with 20 mm graded aggregate for pole foundations, fixing, grouting, alignment, plumbing, tensioning of net, refilling and compaction of earth, anti-corrosive primer and finishing paint/galvanized finish to steelwork, transportation, loading, unloading, labour, tools, tackles, testing and commissioning, complete in all respects as per approved specifications, drawings and direction of Engineer-in-Charge.Net: Regulation-size volleyball netApprox. Net Size: 9.5 m × 1.0 mPosts: Heavy-duty MS/GIHeight: Adjustable as per approved specificationFoundation: PCC 1:3:6, 20 mm graded aggregateCable: Galvanized steel wire ropeTensioning: Winch/turnbuckle arrangementMarket Rate |
| 97 | Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 |
| 98 | Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the workD.S.R. Item No. 6.2.1 |
| 99 | Earth Filling including cartageEarth work cutting on in embankment in ordinary soil earth work in embankment to be in 20cm layers including watering dressing and compacting the soil to achieve 95% proctor density and also including the surface required level and slops and also including lift 1.50m and lead 8km.Analysis Rate |
| 100 | Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the workD.S.R. Item No. 6.2.1 |
| 101 | Earth Filling including cartageEarth work cutting on in embankment in ordinary soil earth work in embankment to be in 20cm layers including watering dressing and compacting the soil to achieve 95% proctor density and also including the surface required level and slops and also including lift 1.50m and lead 8km.Analysis Rate |
| 102 | Providing, supplying, erecting and fixing complete Basketball Goal Post System of approved quality, comprising heavy-duty MS/GI steel basketball pole/column, regulation-size basketball backboard of suitable material, heavy-duty basketball ring/rim with nylon net, complete with supporting brackets, mounting frame, braces, anchor bolts, nuts, washers and all necessary fixing hardware, including excavation of foundation pit, providing and laying RCC/PCC foundation of specified grade, reinforcement where required, fixing, grouting, plumbing and alignment of pole, installation of backboard and ring at approved playing height, fixing of basketball net, anti-corrosive primer and finishing paint/galvanized treatment to steelwork, transportation, loading, unloading, labour, tools, tackles, testing and commissioning, complete in all respects as per approved drawings/specifications and direction of Engineer-in-Charge.System: Basketball Goal Post Complete SetPole: Heavy-duty MS/GI steelBackboard: Regulation-size approved materialRing: Heavy-duty steel basketball rimNet: Weather-resistant nylon basketball netFoundation: RCC/PCC foundation with suitable anchoringMarket Rate |
| 103 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverableseparately).D.S.R. Item No. 16.75 |
| 104 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.On concrete workD.S.R. 13.52.2 |
| 105 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick in 5 number of concrete segmentD.S.R. 11.13.1 |
| 106 | Supply & Fixing of 150mm dia PVC pipe 6Kg per cm Square Pressure.Make : Astral, Prince, Kissan. RatePSR |
| 107 | Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size) alround PVC pipes including bed concrete as per standard design.D.S.R. 2023 Item No. 19.2.2 |
| 108 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :D.S.R. 2023 Item No.18.33 |
| 109 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.300 mm diaD.S.R. Item No. 23.1.1 |
| 110 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size diaD.S.R. 2023 Item No. 23.4.3 |
| 111 | Supply & Fixing of 200mm dia PVC pipe 10Kg per cm Square Pressure.Make : Astral, Prince, Kissan. Rate200 mm nominal size diaD.S.R. 2023 Item No. 23.3.3 |
| 112 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. D.S.R. 2023 Item No. 23.7 |
| 113 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.D.S.R. 2023 Item No. 23.5 |
| 114 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 560 mm internal diameterL D- 2.5D.S.R. 2023 Item No. 19.19.3.1 |
| 115 | Providing & Fixing of Footrest making with 1.40meter long mild steel bar of 20mm diaAnalysis |
| 116 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white plastic seat and lidMake: JaquarD.S.R. Item No. 17.2.1 |
| 117 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.Make: JaquarD.S.R. Item No. 17.7.4 |
| 118 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Semi rigid pipe : 32mm diaMake : Finolex/AstralD.S.R. Item No. 17.28.1 |
| 119 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. D.S.R. Item No. 17.31.1 |
| 120 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.15mm nominal boreMake : JaquarD.S.R. Item No. 17.16A |
| 121 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.Make: JaquarD.S.R. Item No. 17.71 |
| 122 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.110mm diameterMake : Finolex/AstralD.S.R. Item No. 12.41.2 |
| 123 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm Make : Finolex/AstralD.S.R. Item No. 12.43.2 |
| 124 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.Make : Finolex/AstralD.S.R. Item No. 12.44 |
| 125 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20mm dia nominal outer dia pipesMake : Finolex/AstralD.S.R. Item No. 18.7.2 |
| 126 | 25mm dia nominal outer dia pipesD.S.R. Item No. 18.7.3 |
| 127 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.15mm dia nominal outer dia pipesMake : Finolex/AstralD.S.R. Item No. 18.8.1 |
| 128 | 20mm dia nominal outer dia pipesD.S.R. Item No. 18.8.2 |
| 129 | 25mm dia nominal outer dia pipesD.S.R. Item No. 18.8.3 |
| 130 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions15mm nominal bore.D.S.R. Item No.18.21.2.1 |
| 131 | Providing & fixing CP brass bib cock of approved quality conforming to IS 893115mm nominal boreMake : JaquarD.S.R. Item No. 18.49.1 |
| 132 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal boreMake : JaquarD.S.R. Item No. 18.53.1 |
| 133 | Providing and fixing gun metal gate valve with wheel of approved quality.25mm dia nominal boreMake : JaquarD.S.R. Item No. 18.17.1 |
| 134 | Providing and fixing gun metal gate valve with wheel of approved quality.20mm dia nominal boreMake : JaquarD.S.R. Item No. 18.17.1A |
| 135 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25 mm nominal bore Make : Jaquar D.S.R. Item No. 18.18.3 |
| 136 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Make : Finolex/AstralD.S.R. Item No. 18.48 |
| 137 | Providing & laying PVC Pipe 100mm diameterMake : Finolex/AstralPWD SOR 730A |
| 138 | Providing & laying PVC Pipe 150mm diameterMake : Finolex/AstralMarket Rate 730B |
| 139 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.100mm diameter S.W. PipeD.S.R. Item No. 19.2.1 |
| 140 | 150mm diameter S.W. PipeD.S.R. Item No. 19.2.2 |
| 141 | Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design: 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885D.S.R. Item No. 19.4.1 |
| 142 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.Make : JaquarD.S.R. 17.5.4 |
| 143 | Supplying and fixing of semi circle foam fountain with all necessary equipments(including Nozzle, Light, SMPS, Submersible pump, RGB controller, GI Ring, 1mm four core) all as per direction of Engineer in charge ( Analysed rate)Make : Premiere Fountain |
| 144 | Electrical WorksPOINT WIRINGWiring for light point / fan point /exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required. (Make: Schneider/RR Kable/Northwest). D.S.R. Group A 1.1.1 |
| 145 | CIRCUIT/SUBMAIN WIRINGWiring for circuit/ submain wiring alongwith earth wire including excavation & filling the same as per site requirement with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Make: Schneider/RR Kable/Northwest). Wire Sizes2x1.5sq.mm + 1x1.5sq.mm earth wireD.S.R. 1.7.1 |
| 146 | 2x2.5sq.mm + 1x2.5sq.mm earth wireD.S.R. 1.7.2 |
| 147 | 2x4 sq.mm + 1x4 sq.mm earth wireD.S.R. 1.7.3 |
| 148 | P.V.C CONDUITSupplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mmD.S.R. 1.21.2 |
| 149 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as requiredD.S.R. 1.29 |
| 150 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 ampspiano type switch, connection, painting etc. as required.D.S.R. 1.30 |
| 151 | DISTRIBUTION BOARDS & MCB'sSupplying and fixing TPN sheet steel enclosure on surface/ recess along with 63 A 415 V \\"C\\" curve TPN MCB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS).D.S.R. 2.1.2 |
| 152 | Supplying and fixing TPN sheet steel enclosure on surface/ recess along with 32 A 220 V \\"C\\" curve TPN MCB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS).D.S.R. 2.1.1 |
| 153 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS) Single poleD.S.R. 2.10.1 |
| 154 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS)D.S.R. 2.16 |
| 155 | EARTHING & MISCELLANEOUS ITEMS 5.8COPPER STRIP EARTHING:-Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) D.S.R. 5.8 |
| 156 | EARTH STATION:- Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosurewith cover plate having locking arrangement and watering pipeof 2.7 metre long etc. with charcoal/ coke and salt as required.D.S.R. 5.6 |
| 157 | CABLE TRAYSupplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thicknessD.S.R. 4.1.1 |
| 158 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thicknessD.S.R. 4.2.1 |
| 159 | Supplying and fixing of following ways surface/ recessmounting, vertical type, 220 V, DB MCB distribution board of sheet steel, dust protected, duly powder painted & water proof inclusive of Common neutral Bus Bar, earth Connection, din bar for mounting MCBs (but without MCBs and incomer ) as required (Make: Schneider/MDS)M.R. (P.S.) |
| 160 | PANELSINCOMING : -Providing and fixing following rating and breaking capacity and pole MCCB with sutable MCCB enclosure with thermomagnetic release and terminal spreaders in existing panel board including drilling holes in panel, making connections, etc. as required.100 A 25KA, 04 pole, TPN MCCB (make schneider,HPL)M.R. (P.S.) |
| 161 | BUS BAR :-Supplying, installing on wall, testing and commissioning of following capacity rising mains made of 1.6mm thick IP 42 sheet steel enclosure duly painted with powder coating, wall straps, fully PVC insulated 4 Nos Copper bus bars having current density of 80 A/ sq cm at nominal current rating in convenient sections and suitable for 415 V, 3 phase, 4 wire, 50Hz, A.C. supply with extension joints, fire proof barriers, expansion joints, thrust pads including jointing and earthing with 2 runs of galvanised iron strips etc. as required.( Havells & other brand) (Make: Schneider/MDS)100 A (S.C. rating for 1 sec - 20 kA)M.R. (P.S.) |
| 162 | CHANGE OVER:-Providing and fixing of on load change over switch of current rating 100 amp, 04 pole, 415 V & 50Hz front operated in sheet steel enclosure in existing panel board including drilling holes in panel, making connections, etc. as required.(Make: Schneider/MDS)M.R. (P.S.) |
| 163 | METERING, INDICATIONS AND RELAYS:-Providing and fixing AC Digital display voltmeter, Ammeter (3 phase, 0-500V AC, 0-500 A through CT) & R /Y /B phase LED Indicating lamp in existing panel board including drilling holes in panel, making connections, etc as required.(Make:Schneider/MDS)M.R. (P.S.) |
| 164 | CABLES & TERMINATIONALUMINIUM / COPPER CABLE (ARMOURED):- Supply and laying of the following 1.1 & 11 KV Aluminium/ Copper conductor XLPE insulated, PVC Sheathed, steel Armoured as per standard specifications. 4 core 50 sq.mm XLPE 11 KV grade Aluminium cable (Make: Finolex/RR Kable).M.R. (P.S.) |
| 165 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Above 35 sq. mm and upto 95 sq. mmD.S.R. Item No. 7.3.2 |
| 166 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Above 95 sq. mm and upto 185 sq. mmD.S.R. Item No. 7.3.3 |
| 167 | CABLE END TERMINATIONS :- Supplying and making end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 & 11 KV grade as required.(Make: Finolex/RR Kable). 4 X 120 sq. mmM.R. (P.S.) |
| 168 | Providing, supplying and fixing of EDGAR LIGHT 3.5 m high decorative pole with RUBUS 27W LED luminaire, complete with all necessary fittings and accessories, of approved make BAJAJ, including 3.5 m high pole of suitable material and finish, LED luminaire, mounting arrangement, base plate, anchor bolts, nuts, washers, brackets, cable entry arrangement, internal wiring, junction box, termination, earthing connection, erection, alignment, grouting/fixing of pole in suitable foundation, testing and commissioning, including all labour, tools, tackles, transportation, loading, unloading and incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Make: Bajaj/Go Green/JaquarModel/Type: Edgar Light – 3.5 m DA Pole with RUBUS 27WLight: RUBUS 27W LEDHeight: 3.5 mUnit: Each (No.)Market Rate |
| 169 | Providing, supplying and fixing TULIP LIGHT 25W DA MARCUS 3.0 m high decorative pole, complete with all necessary fittings and accessories, of approved make, including 25W LED luminaire, 3.0 m high decorative pole, mounting/bracket arrangement, base plate, anchor bolts, nuts, washers, cable entry, internal wiring, junction/terminal box, earthing connection, fixing in suitable foundation with cement concrete, grouting, erection, alignment, testing and commissioning, including transportation, loading, unloading, labour, tools, tackles and all incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Light Type: Tulip LightLuminaire: 25W LEDPole: DA Marcus, 3.0 m heightUnit: Each (No.)Make: Bajaj/Go Green/JaquarMarket Rate |
| 170 | Providing, supplying and fixing ALGARVE LED BOLLARD LIGHT of approved make and model, complete with all necessary fittings and accessories, including LED bollard luminaire, suitable mounting/fixing arrangement, base plate, anchor fasteners, nuts, washers, cable entry, internal wiring, junction/terminal arrangement, earthing connection, suitable RCC/PCC foundation, grouting, erection, alignment, testing and commissioning, including transportation, loading, unloading, labour, tools, tackles and all incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Product: Algarve LED Bollard LightType: LED Outdoor Bollard LightMake: Approved makeWattage: As per approved manufacturer/modelUnit: Each (No.) |
| 171 | Providing, supplying and fixing 4.0 m high TRINGA Column Light with remote control, TRI-Colour Light Column, Model BLSLC 50W LED TRI 4M, of approved make BAJAJ, complete with all necessary fittings and accessories, including 50W LED tri-colour luminaire, 4.0 m high decorative column/pole, remote-control arrangement, LED driver/control gear, mounting brackets, base plate, anchor bolts, nuts, washers, cable entry, internal wiring, junction/terminal box, earthing connection, fixing/erection on suitable RCC/PCC foundation, grouting, plumbing and alignment, testing and commissioning, including transportation, loading, unloading, labour, tools, tackles and all incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Make: BajajModel: BLSLC 50W LED TRI 4MType: Tringa Column Light / Tri-Colour Light ColumnHeight: 4.0 mWattage: 50W LEDControl: Remote ControlUnit: Each (No.) |
| 172 | Providing, supplying and fixing LED Spike/Bush Light, SPYKZ, Model BGSBL 9W LED WW, 9W LED, Warm White 3000K, with die-cast aluminium housing designed for rugged outdoor usage and IP65 protection, of approved make BAJAJ / Go Green / Jaquar or equivalent approved make, complete with LED luminaire, integral/compatible LED driver, adjustable mounting bracket with spike, fixing accessories, electrical connection, cable termination, earthing, testing and commissioning, including all labour, tools, tackles, transportation, loading, unloading and incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Make: Bajaj / Go Green / JaquarPreferred Make: BajajModel: SPYKZ – BGSBL 9W LED WWWattage: 9WCCT: 3000K Warm WhiteHousing: Die-cast aluminiumProtection: IP65Type: LED Spike / Bush LightUnit: Each (No.) |
| 173 | Providing, supplying and fixing Wall Focus Light, BAJAJ AMAZE, Model BJFL 50W LED I, 50W LED floodlight, 5700K, having toughened glass, pressure die-cast aluminium housing, IP66 ingress protection and suitable mounting arrangement, complete with LED driver/control gear, wall-mounting MS/GI bracket, anchor fasteners, nuts, bolts, washers, cable entry, internal wiring, junction/terminal arrangement, electrical connection, earthing, aiming and alignment, testing and commissioning, including all labour, tools, tackles, transportation, loading, unloading and incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Make: Bajaj / Go Green / Jaquar Model: AMAZE – BJFL 50W LED IWattage: 50W LEDCCT: 5700KType: LED Floodlight / Wall Focus LightHousing: AluminiumFront Cover: Toughened glassProtection: IP66Unit: Each (No.)Market Rate |
| 174 | Providing, supplying and fixing 30W Static White MERC Square Projector Light, Item Code BA SP B 120W (WHWW), of approved make BAJAJ / Go Green / Jaquar or equivalent approved make, complete with LED projector luminaire, LED driver/control gear, die-cast aluminium housing, suitable mounting bracket/adjustable aiming arrangement, anchor fasteners, nuts, bolts, washers, cable entry, internal wiring, junction/terminal arrangement, electrical connection, earthing, fixing, aiming and alignment, testing and commissioning, including all labour, tools, tackles, transportation, loading, unloading and all necessary accessories and incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Make: Bajaj / Go Green / Jaquar Type: MERC Square Projector LightSpecified Wattage: 30W Static WhiteItem Code: BA SP B 120W (WHWW) — to be verified against approved manufacturer's datasheetLight Colour: Static WhiteUnit: Each (No.) |
| 175 | Providing, supplying and fixing BA 50W RGBW MERC Square Projector Light of approved make BAJAJ / Go Green / Jaquar or equivalent approved make, complete with LED projector luminaire having RGBW colour-changing facility, LED driver/control gear, die-cast aluminium housing, suitable optical assembly, adjustable mounting bracket, anchor fasteners, nuts, bolts, washers, cable entry, internal wiring, junction/terminal arrangement, electrical connection, earthing, fixing, aiming and alignment, testing and commissioning, including all labour, tools, tackles, transportation, loading, unloading and all necessary fittings, accessories and incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Make: Bajaj / Go Green / Jaquar or equivalent approved makePreferred Make: BajajType: MERC Square LED Projector LightWattage: 50WLight Source: RGBW / RGB + WhiteColour Control: RGB colour-changing with white light facilityHousing: Die-cast aluminiumMounting: Adjustable surface/floodlight mounting bracketUnit: Each (No.) |
| 176 | Providing, supplying, erecting, testing and commissioning of 30W All-in-One (AIO) LED Solar Street Light (Hybrid), Model 30W-SOLAR BSZSL 30W LED HYB-STANDARD HYBRID, of approved make BAJAJ / Go Green / Jaquar or equivalent approved make, complete with high-efficiency solar photovoltaic module, rechargeable battery, MPPT/PWM solar charge controller, LED luminaire, integrated control electronics, automatic dusk-to-dawn operation, suitable battery backup, 5.0 m high octagonal galvanized steel pole, pole top/bracket, foundation bolts, base plate, RCC/PCC foundation, cable/connectors, internal wiring, earthing, installation, testing and commissioning, including transportation, loading, unloading, labour, tools, tackles and all other necessary fittings, accessories and incidental works, complete in all respects as per manufacturer's specifications and direction of Engineer-in-Charge.Make: Bajaj / Go Green / Jaquar or equivalent approved makePreferred Make: BajajModel: 30W-SOLAR BSZSL 30W LED HYB-STANDARD HYBRIDType: All-in-One LED Solar Street Light – HybridLED Power: 30WPole: 5.0 m high octagonal steel poleSystem: Solar PV + Battery + Hybrid control systemOperation: Automatic dusk-to-dawnUnit: Each (No.) |
| 177 | Providing, supplying, installing, testing and commissioning Bajaj PRAZE LED Floodlight, Model PRAZE F 210L WH NB-A5 TG SD, 150W, 5700K, with pressure die-cast aluminium housing, toughened glass, secondary lens optics, IP66 protection and suitable narrow/medium beam optical arrangement, complete with LED driver/control gear, mounting bracket, clamps, anchor fasteners, nuts, bolts, washers, electrical cable connection, cable glands, lugs, termination, earthing and aiming/alignment, including all labour, tools, tackles, transportation, loading, unloading and incidental works, complete in all respects as per manufacturer's specifications, approved lighting design and direction of Engineer-in-Charge.Make: BajajModel: PRAZE F 210L WH NB-A5 TG SDWattage: 150WCCT: 5700KType: LED FloodlightHousing: Pressure die-cast aluminiumFront: Toughened glassProtection: IP66Beam: NB-A5, approx. 60°Unit: Each (No.) |
| 178 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.PWD SOR ITEM NO. 645 |
| 179 | Providing and fixing IP65/IP67 weatherproof LED strip/profile lighting with aluminium profile, diffuser, end caps, connectors, mounting accessories, wiring and complete installation.LED profile: 18 Watt/mMake: Bajaj / Go Green / Jaquar |
| 180 | Providing and fixing weatherproof outdoor LED spotlights for illumination of sculptures/façade, including brackets, drivers, wiring and accessories, complete.Spotlight: 24 WMake: Bajaj / Go Green / Jaquar |
| 181 | Providing and fixing weatherproof outdoor LED floodlights for architectural façade/sculpture lighting, including mounting brackets, drivers, wiring and accessories, complete.Floodlight: 80 WMake: Bajaj / Go Green / Jaquar |
| 182 | Providing and fixing IP67-rated in-ground LED landscape/gateway lights, including recessed housing, fittings, drivers, wiring, drainage provision and accessories, complete.18 WattMake: Bajaj / Go Green / Jaquar |
| 183 | Providing and installing LED drivers/power supplies and control accessories of suitable capacity, including connectors, junctions, protection devices and complete wiring accessories.Make: Bajaj / Go Green / Jaquar |
| 184 | SUB-HEAD-XVI: IT/ NETWORKING, & CCTV SYSTEM-ACTIVE & PASSIVE COMPONENTPASSIVE COMPONENT( STRUCTURED CABLING SYSTEM PASSIVE) Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit (Rate as per Office Building BOQ) |
| 185 | Supply, Installation, Testing & Commissioning of CAT6 information outlet (I/O) for Data, Voice, Wifi and Camera at user end.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 186 | Supply, Installation, Testing & Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end. |
| 187 | Supply, Installation, Testing & Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity. |
| 188 | Supply, Installation, Testing & Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity. |
| 189 | Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. |
| 190 | Supply, Installation, Testing & Commissioning of 42 U (600W/1000D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 191 | Supply, Installation, Testing & Commissioning of 15U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 192 | Supply, Installation, Testing & Commissioning of of Access Switch 24 Port POE+ Access Switches with switching capacity of 128 Gbps, forwarding performance 95 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4 x 10G SFP+ uplink ports, should have support for 9 switch Stacking with bandwidth of minimum 120 Gbps. Should support min 2GB internal DRAM, 2GB internal Flash memory, 32K MAC address, 4k Multicast Routes, Should have static Routing from day 1 and upgradable to support OSPF and VRRP with 1 year support. |
| 193 | SUB-HEAD-XVII: IP CCTV SYSTEMSupply, installation, testing and commissioning of 5 MP Dome camera , ONVIF profile S , G& T ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support upto 128GB , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection(deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 40 meters , IP 67 , IK10 ,POE. |
| 194 | Supply, installation, testing and commissioning of 5 MP Bullet camera , ONVIF profile S ,G & T . UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : line crossing , perimeter intrusion ,Face detection (deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 50 meters , IP 67 , IK 10 housing , POE. |
| 195 | Supply, installation, testing and commissioning of 64 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X RJ45 ethernet , iOS smartphone support , 8 HDD support , each HDD slot support upto 8 TB HDD , RAID support , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be integrated with NVR . Artificial Intelligence Support having face recognition with compatible deep learning supported cameras, AI-Face registered quantity upto 10,000 ,A.I maximum captured quantity 200,000. . UL,CE,FCC certified. |
| 196 | Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard Disk. |
| 197 | Supply, Installation, Testing and Commissioning of Full HD 55\\" LED Professional Display Panel. |
| 198 | Supply, Installation, Testing and Commissioning of 24 port L2 Managed switch having port density 24 Nos. of 10M/100M/1G RJ45 Port POE/POE+ ports , 4 Nos. of 1G/10G SFP+ Port , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnostics.CE,FCC certified |
| 199 | Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5\\" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest |
| 200 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm diaD.S.R. Item No. 1.21.2 |
| 201 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32mm diaD.S.R. Item No. 1.21.3 |
| 202 | Supply, Installation, Testing and Commissioning of LCD / LEDmonitor capable of displaying the output of the CCTV systemin the location specified at site- 31.5 inches TV with KVMsplitter & HDMI cable.Make: Sony/Samsung/LG |
| 203 | Poviding & Fixing Designer dust bin Monkey type with all fitting & acces. required for complition of job complete.(P.S.) |
| 204 | Providing, Fixing Horse Rider (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play (SKU: OKP_STA_024) or equivalent as aproved by engineer in charge.Market Rate |
| 205 | Providing & Fixing Fish Rider (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play (SKU: OKP_STA_029) or equivalent as aproved by engineer in charge.Market Rate |
| 206 | Providing & Fixing MERRY GO ROUND (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play or equivalent as aproved by engineer in charge.Market Rate |
| 207 | Providing & Fixing MONKEY BAR-SIMPLE (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play (SKU: OKP_STA_009) or equivalent as aproved by engineer in charge.Market Rate |
| 208 | Providing & Fixing PLAY 2 SEATER SEA-SAW(Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play SKU: OKP_STA_017 or equivalent as aproved by engineer in charge.Market Rate |
| 209 | Providing & Fixing SWING-A-ONE(Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play ( | ECONOMY MODEL – 8 SKU: OKP_STA_014) or equivalent as aproved by engineer in charge.Market Rate |
| 210 | Providing & Fixing two way Slider (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete. Make: Okay Play (FUNSTATION ECONOMY MODEL – 14, SKU: OKP_EMS 14) or equivalent as aproved by engineer in charge.Market Rate |
| 211 | Providing & Fixing two way Slider PLAYSTATION with all fitting & acces. required for complition of job complete. Make: OK PLAY MEADOW SKU: OKP_NP2 or equivalent as aproved by engineer in charge.Market Rate |
| 212 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.D.S.R. Item NO. 23.1.1.3 400 mm dia |
| 213 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.D.S.R. Item No. 23.2.1.3, 400mm dia |
| 214 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size diaD.S.R. Item No. 23.3.3 |
| 215 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size diaD.S.R. Item No. 23.4.3 |
| 216 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.D.S.R. Item No. 23.8 |
| 217 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.D.S.R. Item No. 23.12 |
| 218 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 200 mm diaD.S.R. Item No. 23.13.3 |
| 219 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp.D.S.R. Item No. 23.14.3 |
| 220 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia.D.S.R. Item No.23.15.3 |
| 221 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal boreD.S.R. Item No. 18.12.6 |
| 222 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) D.S.R. Item No.18.17.4 |
| 223 | Constructing masonry Chamber 60x60x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameterand 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mmnominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design :D.S.R. Item No.18.33.1 |
| 224 | Supply of 100mm dia Johnson screen.Kirlosker/CromptonN.S. |
| 225 | Supply of submersible pump of make KSB 3.00 HP with control panel, support wire etc. complete.Kirlosker/CromptonN.S. |
| 226 | Supply and fixing of finolex of copper cable ISI marked submersible cable of size 6 sq mmMake : Astral/Polycab/HavellsN.S. |
| 227 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).D.S.R. 2025 Item No. 2.1 |
| 228 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).D.S.R. 2025 Item No. 2.2 |
| 229 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% forpayment).D.S.R. 2025 Item No. 2.3 |
| 230 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :D.S.R. 2025 Item No. 2.4.1 Screened through sieve of I.S. designation 20 mm |
| 231 | Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, location and quantities shall be as per drawingMangifera Indica (Mango), Bacopa Monnieri (Brahmi), Terminalia Tomentosa (Asna), Azadirachta Indica (Neem) & Bambusa Bambos (Baans)Terminalia Arjuna (Arjun), Tectoria Grandis (Sagaun), Shorea Robusta (Saal), Stereospermum Tetragonum (Padal), Anogeissus Latifolia (Bakli), Madhuca Longifolia (Mahua) & Diospyros Malabarica (Gaub) Saraca asoca (ashok), Ficus religiosa (peepal), Ficus benghalensis (bargad), Aegle marmelos (bel) & Phyllanthus emblica (aonla) Pterocarpus Santalinus (rakta chandan), Butea monosperma (dhaak), Artocarpus altilis (kathal) & Santalum album (chandan) Saraca Asoka (Sita Ashok), True Cinnamon (Nag Kesar), Mangolia Champaca (Champa) & Mimusops Elengi (Maulsari) Saussurea Ggossypiphora (Mratyusanjeevani), Azadirachta Indiac (Neem) & Adiantum Venustum (Hansraj) |
| 232 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area. (two application) i/c cost of chemical) and as per direction of officer-in-charge.and as per directionof officer-in-charge.D.S.R. 2025 Item No. 2.56 |
| 233 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. D.S.R. 2025 Item No.2.33 |
| 234 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) D.S.R. 2025 Item No. 2.13 |
| 235 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).D.S.R. 2025 Item No. 2.25 |
| 236 | Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. D.S.R. 2025 Item No. 4.88 |
| 237 | Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. D.S.R. 2025 Item No. 4.91 |
| 238 | Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. D.S.R. 2025 Item No. 5.13 |
| 239 | Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. D.S.R. 2025 Item No. 5.17 |
| 240 | Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. D.S.R. 2025 Item No. 5.28 |
| 241 | Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. D.S.R. 2025 Item No. 6.1 |
| 242 | Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. D.S.R. 2025 Item No. 6.3 |
| 243 | Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. D.S.R. 2025 Item No. 6.10 |
| 244 | Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 6.14 |
| 245 | Providing and stacking of Ophiopogon jaburan (variegated) ,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. D.S.R. 2025 Item No. 6.21 |
| 246 | Providing and stacking of Alstonia scholaris of height 150-165 cm. in bagof size 25 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 7.4 |
| 247 | Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 7.13 |
| 248 | Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 7.17 |
| 249 | Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 8.2 |
| 250 | Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.D.S.R. 2025 Item No. 8.7 |
| 251 | Providing and stacking of Cassia laevigata of height 45-60 cm. in earthenpots of size 20 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 8.11 |
| 252 | Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 8.14 |
| 253 | Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 8.54 |
| 254 | Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge. D.S.R. 2025 Item No. 9.2 |
| 255 | Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 9.6 |
| 256 | Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. D.S.R. 2025 Item No. 9.14 |
| 257 | Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 11.17 |
| 258 | Providing and Stacking of Aprajita White well developed in poly bag of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 11.18 |
| 259 | Providing and displaying of Aglaonema Snow-White hybrid (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot. (Specimen ) & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.7 |
| 260 | Providing and displaying of Araucaria cookie having ht. 75 cm to 90 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.14 |
| 261 | Providing and displaying of Araucaria cookie having ht. 1.20 cm to 1.50 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.16 |
| 262 | Providing and Stacking of Ashwagandha of ht. 30 cm with multi branches in Poly bag of size 20 cm.as per direction of the officer-in-charge.D.S.R. 2025 Item No.11.3 |
| 263 | Providing and stacking of Jasmine humile (Yellow) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.D.S.R. 2025 Item No.9.8 |
| 264 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.D.S.R. 2025 Item No.9.9 |
| 265 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of theofficer-in-charge.D.S.R. 2025 Item No. 5.12 |
| 266 | Providing and stacking of Plumeria acutifolia of height 120-135 cm. with 2-3 branches in HDPE bag of size 30 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 7.67 |
| 267 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 2-3 branches in HDPE bag of size 30 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 7.72 |
| 268 | Providing and stacking of Tabernaemontana coronaria (Chandni single) veriegated of height 105-120 cm., multibranched, bushy in big size HDPE bag as per direction of the officer-in-charge.D.S.R. 2025 Item No. 8.63 |
| 269 | Providing and displaying of Livistona palm having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge.D.S.R. 2025 Item No. 3.57 |
| 270 | Providing and displaying of Money Golden leaves mounted on moss stick 90cm ht., having 3 s at equal distance, well developed with full of fresh, shinning and healthy leaves from bottom to top in 25 cm size of Earthenpot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 3.61 |
| 271 | Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 6.10 |
| 272 | Providing and displaying of Croton golden (Broad Leaves) having ht. 60 cm to 75 cm with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot. & as per direction of theofficer-in-charge.D.S.R. 2025 Item No. 3.32 |
| 273 | Providing and displaying of Croton Golden specimen having ht. 90 cm to 1.05 cm with 5 to 6 branches, well developed, fresh and healthy foliage in 30 cm size of Earthen pot/Plastic pot as per direction of the officer-in-charge.D.S.R. 2025 Item No. 3.33 |
| 274 | Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of theofficer-in-charge.D.S.R. 2025 Item No. 3.38 |
| 275 | Providing and Stacking of Curry leaf of height 75-90 cm in poly bag of size 25 cm as perdirection of the officer-in-chargeD.S.R. 2025 Item No. 11.2 |
| 276 | Providing and displaying of Dracaena Victoria having ht. 30 cm & above, well developed with full of leaves, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 3.46 |
| 277 | Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60 75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 8.13 |
| 278 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 3.14 |
| 279 | Providing and displaying of Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 3.17 |
| 280 | Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of the officer-in-charge.D.S.R. 2025 Item No. 3.28 |
| 281 | Providing and Displaying Ficus Long Island topiary well developed with fresh & healthy 5 to 6 ball specific size and shape 120 to 150 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No. 5.21 |
| 282 | Providing and Displaying Ficus reginold well developed fresh & healthy foliage 60 to 75 cm spread 105 to 120 cm ht., Bushy in 35 cm Cement Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No. 5.25 |
| 283 | Providing and stacking of Foxtail palm of ht. 120-150 cm bottom girth 15 20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 7.42 |
| 284 | Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3 4 branches in earthen pots of size 20 cm as per direction of the officer-in-chargeD.S.R. 2025 Item No. 8.30 |
| 285 | Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No. 5.18 |
| 286 | Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 7.24 |
| 287 | Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 8.54 |
| 288 | Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushyin big size HDPE bag as per direction of the officer-in-charge.D.S.R. 2025 Item No. 8.37 |
| 289 | Providing and stacking of Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge.D.S.R. 2025 Item No.6.29 |
| 290 | Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.7.48 |
| 291 | Providing and stacking of Bauhinia blakeana (Kachnar) Yellow of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.7.7 |
| 292 | Providing and Stacking of Karonda of ht. 45-60cm in Poly bag of size 25 cm. as per direction of the officer-in-charge.D.S.R. 2025 Item No.11.11 |
| 293 | Providing and Displaying Latania Rubra Palm well developed with fresh & healthy foliage 150 to 180 cm ht. with 6 to 7 leaves in big 35 cm Cement Pot as per direction of the officer-in-chargeD.S.R. 2025 Item No. 5.35 |
| 294 | Providing and stacking of Lagerstroemia flosreginae of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 7.50 |
| 295 | Providing and Stacking of Lemon grass of ht. 30cm with multi branches in Poly bag of size 20 cm. as per direction of the officer-in-charge.D.S.R. 2025 Item No. 11.10 |
| 296 | Providing and stacking of Pinus longifolia (Pinus) of height 90-105 cm. in cement pots of size 35 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 7.65 |
| 297 | Providing and stacking of Murraya Koenigii spreng (Kadipatta/meetha neem) of ht 45-60 cm well developed in earthen pots of size 20 cm. per direction of the officer-in-charge.D.S.R. 2025 Item No. 8.47 |
| 298 | Providing and stacking of Melia azedarach (Bakayan) of height 120-135 cm. in big poly bag of size 25 cm as per direction of the officer-in-chargeD.S.R. 2025 Item No. 7.54 |
| 299 | Providing and Displaying Petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No. 4.50 |
| 300 | Providing and stacking of Tabernaemontana divaricata (Chandni double) of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No. 8.64 |
| 301 | Providing and displaying of Phoenix palm having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.67 |
| 302 | Providing and stacking of Ficus infectoria (Pilkhan) of height 150-165 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.7.32 |
| 303 | Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-chargeD.S.R. 2025 Item No.7.70 |
| 304 | Providing and displaying of Raphis palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction ofthe officer-in-charge.D.S.R. 2025 Item No.3.70 |
| 305 | Providing and displaying of Raphis palm specimen having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size of Earthen Pot/Chali/Tray & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.71 |
| 306 | Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No.5.3 |
| 307 | Providing and Displaying of Rubber variegated, well developed, having 45 to 60 cm ht.with fresh, healthy leaves in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.90 |
| 308 | Providing and displaying of Dracaena song of India specimen (three in one), having ht. 60 cm & above, well developed, fresh and healthy with good foliage in 25 cm size of Earthen pot/Plastic pot & as per direction ofthe officer-in-charge.D.S.R. 2025 Item No.3.39 |
| 309 | Providing and stacking of Spathodea campanulata of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.7.82 |
| 310 | Providing and stacking of Chlorophytum (Green), full of leafy suckers in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.6.8 |
| 311 | Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No.5.28 |
| 312 | Providing of Schefflera Green (three in one), mounted on moss stick 90 cm, well developed with full of fresh & healthy leaves from bottom to top with rich foliage in 25 cm size of Earthen pot/Plastic pot.as per direction ofofficer-in-charge.D.S.R. 2025 Item No.3.78 |
| 313 | Providing and displaying of Schefflera Varieged, mounted on moss stick 90 cm ht., 3 to 4 s placed in each pot at equal distance, well developed with full of fresh & healthy bright leaves from bottom to top in 25 cm size ofEarthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.79 |
| 314 | Providing and displaying of Areca Palm having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.3.14 |
| 315 | Providing and stacking of Syngonium golden of height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.D.S.R. 2025 Item No.6.26 |
| 316 | Providing and stacking of Tecoma gaudichaudi of height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer-in-charge.D.S.R. 2025 Item No.8.69 |
| 317 | Providing and Displaying Travelers palm well developed with fresh & healthy foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No.5.42 |
| 318 | Providing and Displaying Travelers palm well developed with fresh & healthy leaves foliage 210 to 240 cm ht specimen in 40 cm Cement Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No.5.43 |
| 319 | Providing and stacking of Washingtonia filifea palm stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge.D.S.R. 2025 Item No.5.44 |
| 320 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mmD.S.R. 2025 Item No.2.4.1 |
| 321 | Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.D.S.R. 2025 Item No.4.88 |
| 322 | Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge.D.S.R. 2025 Item No.5.17 |
| 323 | Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-chargeD.S.R. 2025 Item No.5.28 |
| 324 | Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.D.S.R. 2025 Item No.6.1 |
| 325 | Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-chargeD.S.R. 2025 Item No.6.3 |
| 326 | Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-chargeD.S.R. 2025 Item No.6.10 |
| 327 | Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge..D.S.R. 2025 Item No.6.14 |
| 328 | Providing and stacking of Ophiopogon jaburan ( variegated ),full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.D.S.R. 2025 Item No.6.21 |
| 329 | Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.8.14 |
| 330 | Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.8.54 |
| 331 | Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.9.2 |
| 332 | Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.D.S.R. 2025 Item No.9.6 |
| 333 | Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-chargeD.S.R. 2025 Item No.9.14 |
| 334 | Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-chargeD.S.R. 2025 Item No.11.17 |
| 335 | Providing and Stacking of Aprajita White well developed in poly bag of size 20 cm as per direction of the officer-in-charge.D.S.R. 2025 Item No.11.18 |
| 336 | IRRIGATION SYSTEMDRIP IRRIGATION SYSTEM FOR PLANTATION - ASYSTEM HEAD UNIT SNAD FILTER + BACKWASH ASSLY 2.5\\"P.S. |
| 337 | SCREEN FILTER 2.5\\"P.S. |
| 338 | ASSLY FOR FILTER 2.5\\"P.S. |
| 339 | PRESSURE GAUGE + STOP COCKP.S. |
| 340 | PRV P.S. |
| 341 | NRVP.S. |
| 342 | NETWORK - FINOLEX HDPE & PVC PIPESHDPE PIPE 75 MM PN4 (TANK TO PLOT)P.S. |
| 343 | PVC PIPE 75 MM 4KG/CM2P.S. |
| 344 | PVC PIPE 63 MM 4KG/CM2P.S. |
| 345 | EMITTING SYSTEMFINOGOL PLAIN LATERAL 16 MMP.S. |
| 346 | DRIPPER 8 LPHP.S. |
| 347 | START TO END SET FOR DRIP LINE 16 MMP.S. |
| 348 | BARBED COUPLER 16 MMP.S. |
| 349 | TEE 16 MMP.S. |
| 350 | ELBOW 16 MMP.S.. |
| 351 | ELBOW 16 MMP.S.. |
| 352 | BALL VALVE 63 MMP.S. |
| 353 | FLUSH VALVE 63 MMP.S. |
| 354 | VALVE BOX 12\\"P.S. |
| 355 | Pump: Crompton Greaves 10.00 Hp pump with necessary accessories.(Market Rate) P.S. |
| 356 | Providing, designing, fabricating, supplying, transporting, installing and maintaining one life-size decorative HORSE BOTANICAL / FLORAL SCULPTURE, meticulously crafted over a suitably designed and structurally stable GI/MS framework using approved seasonal, ornamental and flowering plants, including preparation and fixing of the internal framework, GI/MS mesh, planting pockets/containers, approved planting media, fertile soil, compost/manure, fertilizers, suitable plants, drip/micro irrigation arrangement, drainage arrangement, anchoring/foundation where required, artistic shaping and planting, trimming, pruning, replacement of dead/damaged plants, transportation, erection, installation, all labour, tools, tackles and incidental works, complete in all respects as per approved artistic design, dimensions, drawings and direction of Engineer-in-Charge.Item: Life-size Horse Botanical / Floral SculptureApprox. Height: 2.0–2.5 mApprox. Length: 2.5–3.5 mFramework: GI/MS structural framework with suitable meshPlants: Seasonal / ornamental / flowering plants as approved |
| 357 | Providing, designing, fabricating, supplying, transporting, installing and maintaining one life-size decorative PEACOCK-SHAPED BOTANICAL / FLORAL SCULPTURE, meticulously crafted over a suitably designed and structurally stable GI/MS framework with GI/MS mesh, using approved seasonal, ornamental, foliage and flowering plants in different colours, including planting pockets/containers, approved planting media, fertile soil, compost/manure, fertilizers, drip/micro irrigation arrangement, drainage arrangement, suitable PCC/RCC foundation and anchoring, artistic detailing of body, neck, head, beak and spread tail, artistic planting and finishing, trimming, pruning, shaping, replacement of dead/damaged plants, transportation, erection, installation, all labour, tools, tackles and incidental works, complete in all respects as per approved artistic design, dimensions, drawings and direction of Engineer-in-Charge.Item: Peacock Botanical / Floral SculptureApprox. Overall Height: 2.5–3.5 mApprox. Overall Width: 2.5–4.0 mFramework: GI/MS structural framework with GI/MS meshPlants: Seasonal / ornamental / foliage / flowering plants as approved |
| 358 | SCULPTURE, meticulously crafted over a suitably designed, structurally stable and adequately braced GI/MS framework with GI/MS mesh, using approved seasonal, ornamental, foliage and flowering plants, including planting pockets/containers, approved planting media, fertile soil, compost/manure, fertilizers, drip/micro irrigation arrangement, drainage arrangement, suitable RCC/PCC foundation and anchoring, structural bracing for the tall neck and body, artistic detailing of head, ears, horns, neck, body and legs, artistic planting and finishing, trimming, pruning, shaping, replacement of dead/damaged plants, transportation, erection, installation, all labour, tools, tackles and incidental works, complete in all respects as per approved artistic design, structural requirements, drawings and direction of Engineer-in-Charge.Item: Giraffe Botanical / Floral SculptureApprox. Overall Height: 4.0–5.0 mApprox. Overall Length: 2.5–3.5 mFramework: Heavy-duty GI/MS structural framework with GI/MS meshPlants: Seasonal / ornamental / foliage / flowering plants as approved Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender