Short dated tender - Tender For Annual Rate Contract For Electric Repair And Maintenane Work In Juridiction Electrical Divisionbharatpur.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharatpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short dated tender - Tender for Annual Rate Contract For Electric Repair And Maintenane Work In Juridiction Electrical Divisionbharatpur.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988) accessories, Aluminum round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch, Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. |
| 2 | Short point (up to 3 mtr.) |
| 3 | Medium point (up to 6 mtr.) |
| 4 | Long point (up to 10 mtr.) |
| 5 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 6 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. |
| 6 | On board |
| 7 | S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including making jhiri in the wall,clamps at suitable spacing, covering conduit and making good the same as required. |
| 8 | 20 mm |
| 9 | 25 mm |
| 10 | 32 mm |
| 11 | 40 mm |
| 12 | 50 mm |
| 13 | S&F following sizes of ISI marked ( IS:14927 P - II ) uPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners etc. as required. |
| 14 | 20 mm x 12 mm |
| 15 | 25 mm x 12 mm |
| 16 | 32 mm x 12 mm |
| 17 | 25 mm x 16 mm |
| 18 | 38 mm x 16 mm |
| 19 | 38 mm x 25 mm |
| 20 | 38 mm x 38 mm |
| 21 | 50 mm x 16 mm |
| 22 | 50 mm x 50 mm |
| 23 | 75 mm x 50 mm |
| 24 | 75 mm x 75 mm |
| 25 | 100 mm x 50 mm |
| 26 | 100 mm x 100 mm |
| 27 | 150 mm x 50 mm |
| 28 | 150 mm x 100 mm |
| 29 | Supplying and laying FR PVC insulated & unsheathed flexible copper conductor of following nominal sizes with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. |
| 30 | 1 x 1.5 sq.mm |
| 31 | 2 x 1.5 sq.mm |
| 32 | 3x 1.5 sq.mm |
| 33 | 4 x 1.5 sq.mm |
| 34 | 1 x 2.5 sq.mm |
| 35 | 2 x 2.5 sq.mm |
| 36 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 37 | 3 x 2.5 sq.mm |
| 38 | 4 x 2.5 sq.mm |
| 39 | 1 x 4.0 sq.mm |
| 40 | 2 x 4.0 sq.mm |
| 41 | 3 x 4 sq. mm. |
| 42 | 4 x 4.0 sq.mm |
| 43 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 44 | 1 x 6.0 sq.mm |
| 45 | 2 x 6.0 sq.mm |
| 46 | 3 x 6.0 sq. mm. |
| 47 | 4 x 6.0 sq.mm |
| 48 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. |
| 49 | 2 x 6.0 sq. mm. + 1 x 4.0 sq. mm. |
| 50 | 1 x 10.0 sq.mm |
| 51 | 2 x 10.0 sq.mm |
| 52 | 4 x 10.0 sq.mm |
| 53 | 1 x 16.0 sq.mm |
| 54 | 2 x 16.0 sq.mm |
| 55 | 4 x 16.0 sq.mm |
| 56 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanism , energy limiting of class 3 as per IEC, minimum phase termination capacity of 25 sq.mm., conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating, 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. |
| 57 | Single pole MCB (With B / C curve tripping characteristics) |
| 58 | 0.5 A to 5 A rating |
| 59 | 6 A to 32 A rating |
| 60 | 40 A rating |
| 61 | 50/63 A rating |
| 62 | 80 A rating |
| 63 | 100 A rating |
| 64 | 125 A rating |
| 65 | Double pole MCB (With B / C curve tripping characteristics) |
| 66 | 0.5 A to 5 A rating |
| 67 | 6 A to 32 A rating |
| 68 | 40 A rating |
| 69 | 50/63 A rating |
| 70 | 80 A rating |
| 71 | 100 A rating |
| 72 | 125 A rating |
| 73 | Triple pole MCB (With B / C curve tripping characteristics) |
| 74 | 0.5A to 5 A rating |
| 75 | 6 A to 32 A rating |
| 76 | 40 A rating |
| 77 | 50/63 A rating |
| 78 | 80 A rating |
| 79 | 100 A rating |
| 80 | 125 A rating |
| 81 | Four pole MCB (With B / C curve tripping characteristics) |
| 82 | 0.5A to 5 A rating |
| 83 | 6 A to 32 A rating |
| 84 | 40 A rating |
| 85 | 50/63 A rating |
| 86 | 80 A rating |
| 87 | 100 A rating |
| 88 | 125 A rating |
| 89 | Triple pole MCB (With D curve tripping Characteristics) |
| 90 | 0.5 A to 5 A rating |
| 91 | 6 A to 32 A rating |
| 92 | 40 A rating |
| 93 | 50/63 A rating |
| 94 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door (Metal / Glazed / Acrylic) Distribution board with Metal end box made out from Galvanized steel / CRCA sheet, powder coated conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, complete with 100 amp. insulated copper bus bar/shorting link , brass neutral link with shrouds, brass earth link , door earthing arrangement, color coded interconnecting wire set of minimum 10.0 sqmm size and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. |
| 95 | Metal door (single phase) IK-09 and IP-43 with Metal end box |
| 96 | 4 Way |
| 97 | 6 Way |
| 98 | 8 Way |
| 99 | 12 Way |
| 100 | 16 Way |
| 101 | Glazed / Acrylic door (single phase) IK-09 and IP-43 with Metal end box |
| 102 | 4 Way |
| 103 | 6 Way |
| 104 | 8 Way |
| 105 | 12 Way |
| 106 | 16 Way |
| 107 | Metal door (Three phase) IK-09 and IP-43 with Metal end box |
| 108 | 4 Way (8 incomer + 12 Outgoing) |
| 109 | 6 Way (8 incomer + 18 Outgoing) |
| 110 | 8 Way (8 incomer + 24 Outgoing) |
| 111 | 12 Way (8 incomer + 36 Outgoing) |
| 112 | Glazed / Acrylic door (Three phase) IK-09 and IP-43 with Metal end box |
| 113 | 4 Way (8 incomer + 12 Outgoing) |
| 114 | 6 Way (8 incomer + 18 Outgoing) |
| 115 | 8 Way (8 incomer + 24 Outgoing) |
| 116 | 12 Way (8 incomer + 36 Outgoing) |
| 117 | Metal door (Three phase) Per phase isolation, Horizontal IK-09 and IP-43 with Metal end box |
| 118 | 4Way {8 Incomer + 6 Sub Incomer (2+2+2) + 12 out going } |
| 119 | 6Way {8 Incomer + 6 Sub Incomer (2+2+2) + 18 out going } |
| 120 | 8Way. {8 Incomer + 6 Sub Incomer (2+2+2) + 24 out going } |
| 121 | 12 Way {8 Incomer + 6 Sub Incomer (2+2+2) + 36 out going } |
| 122 | Providing & Fixing of Recessed/surface mounting heavy duty Flexi / Row type Distribution board with Metal end box made out from Galvanized steel / CRCA sheet , powder coated conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3 complete with 100 Amp. copper shorting link , brass neutral link with shrouds, brass earth link , color coded interconnecting wire set of suitable rating and din bar, door earthing arrangement, masking sheet, making internal DB terminations with copper lugs, ferrules detachable gland plate, including making connections, testing etc. as required. |
| 123 | Double door IK-09 & IP-43 with metal End box |
| 124 | 4 Row 32 Module(8 module per row) |
| 125 | 4 Row 40 Module(10 module per row) |
| 126 | 4 Row 56 Module(14 module per row) |
| 127 | 3 Row 42 Module(14 module per row) with provision of 160 Amp. MCCB |
| 128 | Glazed / Acrylic door IK-09 & IP-43 with Metal End Box |
| 129 | 4 Row 32 Module(8 module per row) |
| 130 | 4 Row 40 Module(10 module per row) |
| 131 | 4 Row 56 Module(14 module per row) |
| 132 | P&F metal clad / Polyamide industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet , powder coated conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. (without MCB) including making connections, testing etc.as required. |
| 133 | 20 amp, (2P + E), 1 Module |
| 134 | 20 amp, (2P + E), 2 Module |
| 135 | 20 amp, (2P + E), 3 Module |
| 136 | 32 amp, (3P + E), 3 Module |
| 137 | 32 amp, (3P + N + E) 8 Module (with Polyamide Plug & Socket) |
| 138 | 63 amp, (3P + N+ E), 8 Module (with Polyamide Plug & Socket) |
| 139 | P & F of Industrial plug and socket conforming to IEC 60309-1/2 made out of self extinguishing engineering polymer / polyamide, nickel plated brass sleeve and pins, socket with shutter including making connection etc as reqd. |
| 140 | IP -67, IK - 09 Panel mounted socket |
| 141 | 16 A (2P+E) |
| 142 | 32 A (2P+E) |
| 143 | 32 A (3P+N+E) |
| 144 | 63 A (3P+N+E) |
| 145 | IP -67, IK-09 Surface/Wall mounted socket |
| 146 | 16 A (2P+E) |
| 147 | 32 A (2P+E) |
| 148 | 32 A (3P+N+E) |
| 149 | 63 A (3P+N+E) |
| 150 | IP -66, Surface/Wall mounted Interlocked switched socket Outlet with Provision of MCB |
| 151 | 16 A (2P+E) 250 V |
| 152 | 32 A (2P+E), 250 V |
| 153 | 32 A (3P+E), 415 V |
| 154 | 32 A (3P+N +E), 415 V |
| 155 | 63 A (3P+N +E), 415 V |
| 156 | IP - 67 Plug top |
| 157 | 16 A (2P+E) |
| 158 | 32 A (2P+E) |
| 159 | 32 A (3P+E) |
| 160 | 32 A (3P+N+E) |
| 161 | 63 A (3P+N+E) |
| 162 | Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box with provision of incomer suitable for MCB / RCCB/ RCBO up to 63 Amp and SP / TP MCB upto 32 Amp. as outgoing ,made out from Galvanized steel / CRCA sheet, powder coated conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3 complete with insulated 100 A rating copper bus bar, brass neutral bars with shrouds, brass earth bar , color coded interconnecting wire set of suitable rating and din bar, door earthing arrangement, masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. |
| 163 | Double door IK-09 & IP-43 with Metal end box |
| 164 | 4 Way (8 Incomer +12 Outgoing) |
| 165 | 6 Way (8 Incomer +18 Outgoing) |
| 166 | 8 Way (8 Incomer +24 Outgoing) |
| 167 | 12 Way (8 Incomer + 36 Outgoing) |
| 168 | Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box with provision of incomer suitable for 3/4 pole MCCB and SP / TP MCB up to 63 Amps. as outgoing ,made out from Galvanized steel / CRCA sheet , powder coated conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. complete with insulated 125/160/200/250 Amp. copper bus bar, brass neutral bars with shrouds, brass earth bar , color coded interconnecting wire set of suitable rating and din bar, door earthing arrangement, masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. |
| 169 | Double door IP-43 & IK-09 with Provision of Incomer MCCB up to 125 A Rating with Metal end box |
| 170 | 4 Way |
| 171 | 6 Way |
| 172 | 8 Way |
| 173 | 12 Way |
| 174 | Double door IP-43 & IK-09 with Provision of Incomer MCCB 160 A Rating with Metal End Box |
| 175 | 4 Way |
| 176 | 6 Way |
| 177 | 8 Way |
| 178 | 12 Way |
| 179 | Double door IP-43 & IK-09 with Provision of Incomer MCCB 200/250 A Rating with metal End Box |
| 180 | 4 Way |
| 181 | 6 Way |
| 182 | 8 Way |
| 183 | 12 Way |
| 184 | Providing & Fixing of ISI marked (IS:302) ding dong/musical chime bell including making connection testing etc. as required. |
| 185 | Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant virgin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including making connections, testing etc as required. |
| 186 | 6 A one way switch |
| 187 | 6 A two way switch |
| 188 | 6 A bell push |
| 189 | 10 A one way switch |
| 190 | 10 A two way switch |
| 191 | 16 A one way switch 1M |
| 192 | 20 A one way switch 1M |
| 193 | Providing & Fixing of IS:1293 marked modular type lockable feature socket with CM/L no. printed duly made out of unbreakable and fire retardant virgin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating, including making connections, testing etc as required. |
| 194 | 6 A 3 pin shuttered socket |
| 195 | 6/16 A shuttered socket |
| 196 | Providing & Fixing of modular type 100W Step Fan regulator duly ISI marked (IS 11037) with CM/L no. printed made out of unbreakable and fire retardant virgin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including making connections, testing etc as required. |
| 197 | 5 step fan regulator 2 Module |
| 198 | Providing & Fixing of following modular accessories, made out of unbreakable and fire retardant virgin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating, including making connections, testing etc as required. |
| 199 | Modular MCB 6 A to 32 A SP |
| 200 | Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect. |
| 201 | 1/2 Module |
| 202 | 3 Module |
| 203 | 4 Module |
| 204 | 5 Module |
| 205 | 6 Module |
| 206 | 8 Module |
| 207 | 10 Module |
| 208 | 12 Module |
| 209 | 16/18 Module |
| 210 | Providing & Fixing of following size cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect. |
| 211 | 1/2 Module |
| 212 | 3 Module |
| 213 | 4 Module |
| 214 | 5 Module |
| 215 | 6 Module |
| 216 | 8 Module |
| 217 | 10 Module |
| 218 | 12 Module |
| 219 | 16/18 Module |
| 220 | Providing & Fixing of Wiring Accessories OEM fabricated following size virgin material UPVC modular boxes on surface suitable for modular accessories as required. |
| 221 | 1-2 Module |
| 222 | 3 Module |
| 223 | 4/5 Module |
| 224 | 6 / 8 module |
| 225 | 10 / 12 module |
| 226 | 16/18 module |
| 227 | Supplying and fixing of power plug point with Modular accessories on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. |
| 228 | SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation from 50 to 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle ( to be paid extra) , including making connections etc. as required. OEM shall have submit NABL / CPRI / ERDA/ Intertek accrediated lab type test certificate. |
| 229 | 3 pole MCCB With Thermal Magnetic release |
| 230 | 160 Amp , 25 kA, adjustable O/L & fixed S/C setting, |
| 231 | 200 Amp , 25 kA, adjustable O/L & fixed S/C setting, |
| 232 | 4 pole MCCB With Thermal Magnetic release |
| 233 | up to 100 Amp , 25 kA, adjustable O/L & Fixed S/C setting, |
| 234 | 125 Amp , 25 kA, adjustable O/L & Fixed S/C setting, |
| 235 | 160 Amp , 25 kA, adjustable O/L & Fixed S/C setting, |
| 236 | 200 Amp , 25 kA, adjustable O/L & Fixed S/C setting, |
| 237 | 250 Amp , 25 kA, adjustable O/L & adjustable S/C setting, |
| 238 | 250 Amp , 35 kA, adjustable O/L & adjustable S/C setting, |
| 239 | 400 Amp , 35 kA, adjustable O/L & adjustable S/C setting, |
| 240 | 630 Amp , 50 kA, adjustable O/L & adjustable S/C setting, |
| 241 | Providing & Laying XLPE insulated & P.V.C. sheathed Armoured Aluminium cable confirming to IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing commissioning etc. as required of following size. |
| 242 | 4.0 Sq. mm |
| 243 | 2 core |
| 244 | 3 core |
| 245 | 4 core |
| 246 | 6.0 Sq. mm |
| 247 | 2 core |
| 248 | 3 core |
| 249 | 4 core |
| 250 | 10.0 Sq. mm |
| 251 | 2 core |
| 252 | 3 core |
| 253 | 4 core |
| 254 | 16.0 Sq. mm |
| 255 | 2 core |
| 256 | 3 core |
| 257 | 4 core |
| 258 | 25.0 Sq. mm |
| 259 | 2 core |
| 260 | 3 core |
| 261 | 3.5 core |
| 262 | 35.0 Sq. mm |
| 263 | 2 core |
| 264 | 3 core |
| 265 | 3.5 core |
| 266 | 50.0 Sq. mm |
| 267 | 2 core |
| 268 | 3 core |
| 269 | 3.5 core |
| 270 | 70.0 Sq. mm |
| 271 | 1 core |
| 272 | 2 core |
| 273 | 3 core |
| 274 | 3.5 core |
| 275 | 95.0 Sq. mm |
| 276 | 1 core |
| 277 | 3.5 core |
| 278 | 120.0 Sq. mm |
| 279 | 1 core |
| 280 | 3.5 core |
| 281 | 150.0 Sq. mm |
| 282 | 1 core |
| 283 | 3.5 core |
| 284 | 185.0 Sq. mm |
| 285 | 1 core |
| 286 | 3.5 core |
| 287 | 240.0 Sq. mm |
| 288 | 1 core |
| 289 | 3.5 core |
| 290 | 300.0 Sq. mm |
| 291 | 1 core |
| 292 | 3.5 core |
| 293 | Add extra in item no. 11.1 to 11.4 for Laying Charges for cable through Manual Boggi by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required. |
| 294 | Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring, Compression Nut, heavy duty aluminium lugs (as per IS 8309 -1993) duly crimped with crimping tool, PVC tape as per IS 8337-1976 of following size of PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required. |
| 295 | 2 x 4.0 sq.mm |
| 296 | 2 x 6.0 sq.mm |
| 297 | 2 x 10.0 sq.mm |
| 298 | 2 x 16.0 sq.mm |
| 299 | 2 x 25.0 sq.mm |
| 300 | 2 x 35.0 sq.mm |
| 301 | 2 x 50.0 sq.mm |
| 302 | 2 x 70.0 sq.mm |
| 303 | 3 x 4.0 sq.mm |
| 304 | 3 x 6.0 sq.mm |
| 305 | 3 x 10.0 sq.mm |
| 306 | 3 x 16.0 sq.mm |
| 307 | 3 x 25.0 sq.mm |
| 308 | 3 x 35.0 sq.mm |
| 309 | 3 x 50.0 sq.mm |
| 310 | 3 x 70.0 sq.mm |
| 311 | 3.5 x 25.0 sq.mm |
| 312 | 3.5 x 35.0 sq.mm |
| 313 | 3.5 x 50.0 sq.mm |
| 314 | 3.5 x 70.0 sq.mm |
| 315 | 3.5 x 95.0 sq.mm |
| 316 | 3.5 x 120.0 sq.mm |
| 317 | 3.5 x 150.0 sq.mm |
| 318 | 3.5 x 185.0 sq.mm |
| 319 | 3.5 x 240.0 sq.mm |
| 320 | 3.5 x 300.0 sq.mm |
| 321 | 3.5 x 400.0 sq.mm |
| 322 | 3.5 x 500.0 sq.mm |
| 323 | 3.5 x 630.0 sq.mm |
| 324 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, Heavy duty weather proof poly-propylene earth inspection chamber as per requirement of IS/IEC 62305 and tested as per IEC 62561-5 with lockable Jam free lid suitable for safe working load 60 kN of round / square size 250 mm, and Height 250 to 300 mm and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. |
| 325 | Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, Heavy duty weather proof poly-propylene earth inspection chamber as per requirement of IS/IEC 62305 and tested as per IEC 62561-5 with lockable Jam free lid suitable for safe working load 60 kN of round / square size 250 mm, and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. |
| 326 | Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, Heavy duty weather proof poly-propylene earth inspection chamber as per requirement of IS/IEC 62305 and tested as per IEC 62561-5 with lockable Jam free lid suitable for safe working load 60 kN of round / square size 250 mm, and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. |
| 327 | Supply & Laying following size earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/ soldering/ welding, Jointing shall be done by overlapping double the width of strip and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. |
| 328 | 20mm x 3mm copper strip |
| 329 | 25mm x 3mm copper strip |
| 330 | 25mm x 5mm copper strip |
| 331 | 30mm x 5 mm copper strip |
| 332 | 40mm x 6mm copper strip |
| 333 | 50mm x 6mm copper strip |
| 334 | 20mm x 3mm tinned copper strip |
| 335 | 25mm x 3mm tinned copper strip |
| 336 | 25mm x 5mm tinned copper strip |
| 337 | 30mm x 5 mm tinned copper strip |
| 338 | 40mm x 6mm tinned copper strip |
| 339 | 50mm x 6mm tinned copper strip |
| 340 | 20mm x 3mm G.I. ( Hot Dipped ) Strip |
| 341 | 25mm x 3mm G.I. ( Hot Dipped ) Strip |
| 342 | 25mm x 6mm G.I. ( Hot Dipped ) Strip |
| 343 | 32mm x6mm G.I. ( Hot Dipped ) Strip |
| 344 | 50mm x 6mm G.I. ( Hot Dipped ) Strip |
| 345 | Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. |
| 346 | 8 SWG G.I. ( Hot Dipped ) Wire |
| 347 | 10 SWG G.I. ( Hot Dipped ) Wire |
| 348 | Providing & Fixing of 400 mm Sweep BLDC technology Oscillating type Wall mounting / Pedestal type fans with Three speed, ON and OFF position, Double Wall bearing with front and back 120 or more ribs guard; Three no. blades, noise level should be <= 75 dB, including fixing with anchor bolts, making connection testing etc. as required. ( With Remote ) |
| 349 | Wall mounting type with Service value 2.0 CMM /W, Min. Air Delivery 71 CMM |
| 350 | Providing & Fixing of BEE Star rated copper wounded with class of Insulation 'F', double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in IS 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required. |
| 351 | 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) |
| 352 | Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core 1.5 Sq.mm copper conductor ,making connections, testing etc. as required. |
| 353 | 300 mm sweep Minimum air delivery 1600 Cum / hour |
| 354 | Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 marked in existing opening including making connections testing etc. as required. |
| 355 | 300 mm sweep(900 RPM) |
| 356 | 380 mm sweep(900 RPM) |
| 357 | SITC of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output only at CW (5700K to 6500K) , internal surge protection of 4.0 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) as required. |
| 358 | 1170mm(+/-10%) LED batten with min. lumen output 2200 lm |
| 359 | SITC of IP-20 LED Recessed / Surface Mounted, Round / Square backlit & SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS compliance 4.0 KV surge protected Isolated driver, with Short & Open circuit protection input 320VAC-48 hr protection, input 350VAC-2 hr protection), having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt,at CW (5700K to 6500K) , THD < 10 % , Pf.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) as required. |
| 360 | Recessed Mounting |
| 361 | Minimum lumen output 1950 lm |
| 362 | Surface Mounting (with extruded alumn. Housing ) |
| 363 | Minimum lumen output 1950 lm |
| 364 | SITC of IP20, 2'x2' LED Surface/ Recessed mounting backlit & SMD Mid power type LED Light fixture not less than 35 mm housing depth made from CRCA sheet steel housing, high purity / transmissivity UV stabilized Non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 V, HV cutoff - LV cutoff should be 300-100V . High efficiency with 4 KV internal surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection ( input 320VAC-48 hoursprotection,input 350VAC-2 hours protection) (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) as required. |
| 365 | Recessed Mounting |
| 366 | Minimum lumen output 4320 lm |
| 367 | Surface Mounting (Driver should be Inside the Luminaire) |
| 368 | Minimum lumen output 4320 lm |
| 369 | SITC of IP20, 1'X1' LED Surface/ Recessed mounting backlit & SMD Mid power type LED Light fixture not less than 35 mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution.operating voltage range 140-285 V, HV cutoff - LV cutoff should be 300-100V High efficiency with 4 KV internal surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) as required. |
| 370 | Recessed Mounting |
| 371 | Minimum lumen output 3600 lm |
| 372 | Surface Mounting (Driver should be Inside the Luminaire) |
| 373 | Minimum lumen output 3600 lm |
| 374 | Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass with suitable lenses on LED / integrated lens diffuser to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated metal case potted driver as a unique BIS R number (as per IS 15885) having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate(Fitting & driver both have separate BIS R number). The System level Luminaire efficacy >=130 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC & Low Voltage cutoff @>=90 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , LED driving output current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K as required. |
| 375 | High Power LED Flood Light Minimum lumen output 15600 lm |
| 376 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing and secondary lens on each LED/ integrated lens diffuser without cover & should be High power LED of 3 to 5 watt each . The System efficacy >=135 lm/ wt and integrated metal case potted driver & has a unique BIS R number ( as per IS 15885) with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC & Low Voltage cutoff @>=90 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . LED driving output current <750mA. The luminaire shall be BIS certified (Fitting & driver both have separte BIS R number) and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs as required. |
| 377 | LED Street Light fixture with Minimum lumen output 13500 lm |
| 378 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED/ integrated lens diffuser & should be High power LED of 3 to 5 watt each . The System efficacy >=125 lm/ wt and integrated metal case potted driver & has a unique BIS R number ( as per IS 15885) with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC & Low Voltage cutoff @>=90 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . LED driving output current <750mA. The luminaire shall be BIS certified (Fitting & driver both have separte BIS R number) and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs as required. |
| 379 | LED Street Light fixture with Minimum lumen output 12500 lm |
| 380 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, U/UTP (Unscreened/Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by LSZH Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies ranging from 250 to 500 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender