Tender For Special Repair Of Certain Selected Washroom At Hq 21 Corps Office Complex Under Ge Dronachal
Tender Value
27.62 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Certain Selected Washroom At Hq 21 Corps Office Complex Under Ge Dronachal
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement motar bedding (but not backing), removing serviceable tiles to stores and rubbish of the premisses complete all as specified by directed by Engineer-in-Charge |
| 2 | M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and including screed bed 15cm in CM (1:6) complete all as specified and directed. |
| 3 | M&L Glazed tiles Glossy Finish in vertical surface 1200 mmX 600 X 7 -8 mm thick set and jointed in neat cement slurry and pointed in white or colou cement to match fixed over 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 4 | Demolition of Brickwork or Stone Boulder Masonary, Bulit in Cement Mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engnr-in-Charge |
| 5 | M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 6 | M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 7 | Material and Labour for Anodised aluminium snap grid frame work for false ceiling all as specified including Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge |
| 8 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons or Platforms laid bedded in any type of mortar complete all as specified and as directed by Engnr-in-Charge etc. |
| 9 | M&L Granite of 20 mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and including 20 mm screed bed in CM 1:3 all as specified and directed. |
| 10 | Providing edge moulding to 18-20mm thick Granite Stone of any Type stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 11 | Material and Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base of 15 mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge |
| 12 | S & F in Repair, Table top Ceramic Wash Basin Wash Basin of Make Cera of size 600 x 400 x 160 mm or equivalent including Supply and Fix in Repair Bottle Trap of CP bottle traps of Dia 32 mm, for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, Including PVC connections 15 mm size with PTMT nuts of length 600 mm, including waste pipe complete all as specified and as specified and as directed by Engnr-in-Charge |
| 13 | S & F in Repair, CP Waste coupling of (half or full threaded) (Minimum weight 32 mm 45 gms/40 mm-60 gms), Bore dia of only fixed in discharge pipe (mm) |
| 14 | S&F in repair 15 mm wash basin mixture, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by engr in charge. |
| 15 | S & F in Repair ISI marked 15 mm bore stop valves/angle valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 16 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. (Wall Hung EWC Deisgn may be decided by the user from the Catalogue of Approved Makes) |
| 17 | Supply and Fixing in Mechanical Concealed Cistern of Suitable Capacity with Frame along with all the accessories like P Trap or S Trap Pipe, Connection Hanger, Protection Cap Adapter Sleeve Including Mechanical Push Plates Chrome Round Type or Equivalent Etc and PVC connection 450 mm long. complete all as specified and as directed by the Engineer-in-Charge |
| 18 | Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern concealed type complete all as specified and as directed. |
| 19 | Supply and fixing for ISI marked 15mm bore, fancy type Two way bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer outlet dia of 75 mm, complete all as specified and as directed by Engnr-in-Charge. |
| 21 | S&F in repir Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified including Health faucet fixing in pipe etc. complete all as specified and as directed. |
| 22 | S&F in repair of Toilet paper holder chromium plated recessed type fixing complete all as specified and directed by engr in charge. Make: Prayag or equivalent |
| 23 | Supply and Fix Shelf of Glass fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed by Engineer in Charge. |
| 24 | Supply and Fix Chromium plated Tumbler Holder brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed by Engineer in Charge. |
| 25 | Supply and Fix Chromium plated Towel Rack brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed by Engineer in Charge. |
| 26 | Supply and Fix Chromium plated 04 Way Rob Hook brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed by Engineer in Charge. |
| 27 | S & F Chromium Plated Tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge |
| 28 | Supply and Fix in Repair Half Stall Vitreous China Urinal White Colour of Size 710 X 480 X 300mm, Ist Quality with sensotrinic, sensor Flushing valve with kit including CP waste pipe with PVC down waste pipe upto floor level (complete set) complete all as per manufacturer instructions and directed. Make Jaquar (Cat No URS-WHT-0704, SNR-51097) or equivalent as approved by GE. |
| 29 | S & F in repairs Vitreous China Urinal, Flat Back Type of Minimum length 610 mm, white including connecting all the fittings necessary for the functioning of the Urinal complete all as specified and as Directed by Engineer-in-Charge. ( Flat Back Urinal may be choosen by the user from the catalogue of approved make) |
| 30 | Supply and Fix in repair Push tap, suitable for urinals, any colour high pressure of Chromium Plated screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) 15 mm bore dia of pipe in complete all as specified and as directed. |
| 31 | Supply and Fix in Repairs, Waste coupling of Chromium Plated suitable for urinals and 32 mm bore dia of discharge pipes (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms |
| 32 | Supply and Fix in Repair, Urinal spreader of Chromium Plated any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 33 | Supply and Fix in Repair Bottle trap of Chromium Plated having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 35 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 36 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 37 | Ditto as above but of Frame size 45x 70 mm |
| 38 | S& F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 39 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type on single sides, flush door shutter suitable for Kitchen/Cupboard of size 24 mm thick, On Shelves and on Shutters, All including Decorative type Fixtures and suitable Type Hinges, Locking Arrangement separte on each portion, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 600 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture complete all as specified and directed. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on one faces of shutters. |
| 40 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 41 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified. |
| 42 | S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified. |
| 43 | S&F 300mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F for 100mm Mild steel butt hinge complete all as specified and directed. |
| 45 | S&F new single action spring hinge, 125 mm size, mild steel with steel wire spring, stove enameled black fixed to angle iron door frame by welding complete all as specified and directed. |
| 46 | S&F Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area of Window not exceeding 1.00 sqm each |
| 47 | Ditto As in Item Above but Window Area exceeding 1.00 sqm but not exceeding 2.00 sqm each |
| 48 | S&F Sheet glass 5 mm thick exc 0.5 sqm in each pane fixed in aluminium/wooden frame using oil putty complete all as specified and directed by Engr in charge. |
| 49 | S&F 5.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed by Engr in charge. |
| 50 | Material and Labor for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 51 | Supply and Fix 12 mm thick Toughned Glass (Emossing and Filming as per user requirement) as in Hinged Doors, Partitions, Automatic Doors and Similar work including cutting to Shape Drilling Holes required including necessary stainless steel fittings like Handles of size 300 mm Long or Stainless Steel Hinges Suitable for 12 mm thick Glass and other connecting items necessary for proper functioning of door/Partitions complete all as specified and as directed by Engineer-in-Charge. |
| 52 | Supply and fixing in repair Door closer aluminium (extruded) hydraulically regulated designation No 1 universal type, suitable for door shutters of 851 to 1500 mm in width and weight between 61 to 80 kg and fixed. |
| 53 | M & L for Solid PVC Wall Lining consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed by Engineer -in Charge |
| 54 | M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engineer-in-Charge |
| 55 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 56 | Supplying and laying of GI tubing Dia 15 mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. |
| 57 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 58 | Supplying and laying of GI tubing Dia 20mm medium weight incl fittings on walls / ceilings or Laying in floors complete all as specified. |
| 59 | Material and Labour for Cutting chases, pinning in Brick Wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engineer-in-Charge |
| 60 | Taking down cement plaster of any description incl Tezzao finish as in dado/ skirting of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 61 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick/ concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 62 | M&L 10 mm thick rendering in CM 1:3 in ceiling on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement. |
| 63 | M&L Prepartion of newly Plastered surface of wall and applying two coat of oil emulsion white/coloured over and including one coat of white cement based putty all as specified and directed by Engr-in-Charge. |
| 64 | M&L for prepration of Newly Plastered Ceiling Surfaces of any material, applying two coat of oil emulsion over a coat of white base putty on ceiling all as specified. |
| 65 | M&L complete removal of existing Treatment old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 66 | M&L for prepration of old ceiling surfaces , applying two coat of oil emulsion Distemper including White Cement Based Putty, all as specified and directed by Engr-in-Charge. |
| 67 | Supply & fixing in repair PVC (SWR) pipes double socketed in any length with rubber rings joints laid in trenches or in floors including clamps complete all as specified and directed. of the following bore of pipe:- |
| 68 | (a) 110mm |
| 69 | (b) 75mm |
| 70 | Supply & fixing in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps complete all as specified and directed. of the following bore of pipe:- |
| 71 | (a) 110mm |
| 72 | (b) 75mm |
| 73 | Supply & fixing PVC (SWR) junction single (single `T') equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 74 | (a) 75mm |
| 75 | (b) 110mm |
| 76 | Supply & fixing PVC (SWR) PVC (SWR) vent cowl inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 77 | (a) 75mm |
| 78 | Supply & fixing PVC (SWR) double (double Y) equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 79 | (a) 75mm |
| 80 | Supply & fixing in repair PVC (SWR) pipe bend with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 81 | (a) 75mm |
| 82 | (b) 110mm |
| 83 | Demolition of cement concrete of any description and in any position complete all as specified and directed. |
| 84 | Roughnening Surfaces of old Concrete floor by Picking, sweeping, cleaningand washing down with water to remove dust etc. |
| 85 | Brushing Neat Cement Slurry with 3.0 Kg Per Sqm |
| 86 | M&L 10 mm thick rendering in CM 1:4 in sunken Portion on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement using Water Proofing Compund @ 3 % y weight of cement |
| 87 | M & L PCC (1:2:4) type B-0, 50 mm thick (Avg Thickness) using 12.5 mm graded stone aggregate using WPC @ 3 % by weight of cement (WPC will be measured separately) |
| 88 | M & L PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate using WPC @ 3 % by weight of cement as in coving(WPC will be measured separately) |
| 89 | M&L for Cement concrete (1:5:10) in foundations, filling of sunken and mass-concrete etc including complete all as specified and directed |
| 90 | Applying only a coat of Bituminuous Primer @ 200 ml per sqm on concrete surfaces |
| 91 | Supply only Bitumen primer for use in waterproofing and damp-proofing treatments complete all as specified and as directed |
| 92 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces in sunken portion, complete all as specified and as directed |
| 93 | Supply and Fix 32 mm GI Pipe medium Grade as in spout n.exc. 1.00 Rm Each (in short Length) complete all as specified and as directed by Engineer-in-Charge |
| 94 | M&L 40 mm thick rendering in CM 1:4 in sunken portion above PCC on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement using Water Proofing Compund @ 3 % by weight of cement including WPC complete all as specified and directed by Engineer-in-Charge |
| 95 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc ) and making good disturbed surfaces of walls, floor etc. |
| 96 | Taking down old unsv light fitting, bulb of any size and make from the site and making good surface complete all as specified and directed. |
| 97 | Taking down sub main wiring any size complete all as specified and directed. |
| 98 | M&L for point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.5 mm thick and its also including various sizes of module plates in gray/white colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed |
| 99 | One light/Exhaust fan point controlled by one switch. |
| 100 | One 3 pin socket outlet on same board. |
| 101 | One 5 pin socket outlet 5 hole 15 Amp independent including PVC unsheathed copper conductor 2.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 102 | S & F in repair of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 103 | S & F in repair of modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by EIC. |
| 104 | S & F in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 105 | S & F in repair of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by EIC. |
| 106 | S & F in repair of square shape LED 15 watt (w/w) 230 volts AC with high efficiency PMMA diffuser soft glare free light, 2.5 KV voltage surge protection made up of powder coated extruded aluminium housing complete with drivers, suitable for surface/recess mounting including connecting up with three core flexible copper conductor cable of suitable size complete all as directed by EIC. |
| 107 | S & F Crystal indian LED wall mounting mirror ( round/rectangular shape) with touch sensor of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with 2 year warranty, compelete all as directed by EIC. |
| 108 | S & F instant water heater storage type, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 3 ltr having heating element 3 KW and not less than 5 star rating with minimum two year warrant on product, minimum 3 years warranty on heating element and minimum 5 years warranty on inner tank complete all as directed by EIC. |
| 109 | S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1310, insulation class E, rated air delivery 800 cum/hr, high speed, Copper winding of sweep 250 mm sweep, cutting holes and ducting with suitable size of PVC pipe with complete connection complete all as directed by EIC. |
| 110 | S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM not less than 1200, high speed, Copper winding of sweep 150 mm sweep, cutting holes and ducting with suitable size of PVC pipe with complete connection complete all as directed by EIC. |
| 111 | S & F in replacement Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified and directed by EIC |
| 112 | M& L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn idrawn PVC conduit of 25mm size complete all as directed by EIC. |
| 113 | M& L for sub main wiring with two run of 2.5 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 2.5 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn PVC conduit of 25mm size complete all as directed by EIC. |
| 114 | S & F in repair of SPN DB 4 way with 200 Amp rated bus bar, IP 43, acrylic double door, mechanical strength IK09 complete all as directed by EIC. Note: - Contractor must provides IP43 certificate. |
| 115 | S & F in repair of amp rating 240V 10 KA'B' curve MCB SPN 16-32 A current carrying capacity in the MCB DB complete with connection testing and commissioing complete all as specified and directed by EIC |
| 116 | S & F in repair of MCB single pole 6 to 32 Amps 240 V with thimble suitable for wires complete all as directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender