Tender For Provision Of View Cutter On Boundary Wall With ‘Y Shaped Angle With Concertina Coil Alongwith Associated Works At Af Stn Barrackpore Under Ge (Af) Barrackpore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Sep 2026
6 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of View Cutter On Boundary Wall With ‘Y Shaped Angle With Concertina Coil Alongwith Associated Works At Af Stn Barrackpore Under Ge (Af) Barrackpore
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 2 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for and removing materials from site of work complete all as specified and directed. Note: ( Weight of concertina coil and barbed wire shall be measured and ascertained by the BOO at site after its dismantling for payment purpose.) |
| 3 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removing debris from site of work complete all as specified and directed. |
| 4 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of unserviceable material from site complete all as specified and directed. |
| 5 | Material and labour for PCC (1:2:4) type B-1 (20 mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 6 | Supply and fix mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh,galvalume sheets etc.) including all necessary drilling, bolting or riveting,welding etc., and similar work conforming to Fe-410 Gde E-250 complete all as specified and directed. |
| 7 | Fixing only mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting,welding etc.and similar work complete all as specified and directed. |
| 8 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 9 | Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth by complete removal of old paint including primer (by scraping etc) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed |
| 10 | Material and labour for preparation of new steel surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 11 | Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 12 | Supply and fix galvanised 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.Note: - Each line wire to be measured for payment. |
| 13 | Supply and fix concertina coil (CONSEC ZAL Super Razor punched barb tape (SRPBT)) aluminum base helix coil with and including necessary G.I fixing clips for securing complete all as specified and directed with following specification:- (i) Dia of coil (unstretched) - 600 mm (ii) Weight of each coil with hessian pack - 8.00 Kg(±0.5).(iii) Coverage 6.00 m per coil. (iv) Central core wire :- Made from 2.60 mm dia G.I – High Tensile Wire as per IS-4454 galvanised as per IS-2629 . (v) Razor Punched Strip:- Razor punched tape is CONSEC-ZAL steel comprising of Aluminium base with zinc alloy @ 150 gm/ m2 conforming to ASTM A-792/A-792M with additional primer treatment of Epoxy/ Polyurethane & Final Paint Top coat of Caulifield green shade (BSL 139) by Hot Dipping process.Note:- ( Weight of concertina coil shall be measured and ascertained by the BOO at site after physical laying on payment purpose.). |
| 14 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 15 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.. |
| 16 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender