Tender For Repairs To Boundary Wall,Wall Cladding,Chain Link Fence, Concertina Coil And Barbed Wire At Various Locations To Technical Area Of Af Stn Barrackpore Under Ge (Af) Barrackpore.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Sep 2026
6 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Boundary Wall,Wall Cladding,Chain Link Fence, Concertina Coil And Barbed Wire At Various Locations To Technical Area Of Af Stn Barrackpore Under Ge (Af) Barrackpore.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for cess well cess pits man holes pier holes etc n.exc 10 sqm on plan n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. |
| 3 | Returning filling in including spreading levelling water and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 5 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviciable material from site complete all as specified and directed. |
| 6 | Material and labour for brick work with flyash bricks, modular size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 7 | All as per item No 6.00 but except brick and ditto-.Note: - Serviceable brick obtained from item No-5.00 shall be used under this item. |
| 8 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish from the site complete all as specified and directed. |
| 9 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work with using water proofing coumpound (WPC) @ 200ml per 50 Kg bag of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 10 | Supply only liquid water proofing compound (WPC) complete all as specified and directed. |
| 11 | Material and labour in repair for precast cement concrete (1:2:4) type B0 (12.5 mm graded stone aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mouldings set jointed and pointed in cement mortar (1:4) including necessary formwork and demolition of existing louvres and jallies complete all as specified and directed. |
| 12 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 13 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified and directed. |
| 14 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 15 | Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, coping, bed block for embedding hold fasts, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed |
| 16 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all as directed. |
| 17 | Material and labour for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed |
| 18 | Dismantling of posts or struts (wood, steel or RCC of any section) embedded in concrete, brick work masonry etc. any section, including taking out embedded portion and making good disturbed ground including removing of debris from site complete all as specified and directed. |
| 19 | Dismantling of fencing wire mesh of chain link or any type including removing of debris from site complete all as specified and directed. |
| 20 | Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 21 | Supply and fix mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including one shop coat of red oxide zinch chrome primer complete all as specified and directed. |
| 22 | Material and labour for mild steel round bars 10 mm dia as in tie bar of chain link fencing conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 23 | Supply and fix mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 24 | Supply only chain link MS galvanisd fencing of any size complete all as specified and directed. Note:- Weight of chain link fence shall be ascertained through BOO as directed by GE. |
| 25 | Fixing only chain link fencing including line wire, any mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wires complete all as specified and directed. |
| 26 | Restraining, resecuring incl. making good to existing chain link fencing including line wire, any mesh, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wires complete all as specified and directed. |
| 27 | Supply and fix mild steel framed work in hung gates, including Pintle hinges, stops, hand made sliding bolts etc. and similar work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 28 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 29 | Material and labour for rolled mild steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc conforming to Fe-410 W Gde E-250 quality-A including one shop coat of red oxide zinch chrome primer complete all as specified and directed. |
| 30 | Material and labour for structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes including one shop coat of red oxide zinch chrome primer complete all as specified and directed. |
| 31 | Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 32 | Supply and fix in repair 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 33 | Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 34 | Refixing, securing, erecting only in repair with self tapping screws including minor mason work and filling of holes etc with concrete and making good of existing 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain/corrugated steel sheet as in roof covering/cladding to wall or in any position complete all as specified and directed. |
| 35 | Material and labour for closing bolt/screw holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with bitumen tape or one bitumen and one curved GI washer on either side and 6 mm GI bolts and nuts, all set in stiff white lead,bolt n exc 25 mm in length complete all as specified and directed. |
| 36 | Supply and fix in repair concertina coil (CONSEC ZAL Super Razor punched barb tape (SRPBT)) aluminum base helix coil with and including necessary G.I fixing clips for securing complete all as specified and directed with following specification:- (i) Dia of coil (unstretched) - 610 mm (ii) No of Spirals - 6 spirals per per RM (iii) Weight of each coil with hessian pack - 8.00 Kg(±0.5). (iv) Central core wire :- Made from 2.60 mm dia G.I – High Tensile Wire as per IS-4454 galvanised as per IS-2629 . (v) Razor Punched Strip:- Razor punched tape is CONSEC-ZAL steel comprising of Aluminium base with zinc alloy @ 150 gm/ m2 conforming to ASTM A-792/A-792M with additional primer treatment of Epoxy/ Polyurethane & Final Paint Top coat of Caulifield green shade (BSL 139) by Hot Dipping process.Note:- Running length of the wall shall be measured for payment purpose. |
| 37 | Supply and fix in repair galvanised 2 strand, steel barbed wire 2.24mm dia. barbed with 2mm dia. barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.NOTE: Each line wire to be measured for payment. |
| 38 | Restraining, resecuring incl. making good staples etc to existing Galvanised steel barbed wire of any type and description straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.NOTE: Each line wire to be measured for payment. |
| 39 | Material and labour for cutting out cracks to V-section grooves on external surface of wall/ roof or terracing up to 25mm depth and 25mm width and filled with multi purpose binder (MPB) crack filler and rendering the surface in cement mortor (1:3) complete all as specified and directed. |
| 40 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed. |
| 41 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed. |
| 42 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed. |
| 43 | Material and labour for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 100mm deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 44 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 45 | Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement including forming costruction joint 30mm deep x 10mm wide filled with sealing compound of group 'A' complete all as specified and directed. |
| 46 | Material and labour 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base or base course of floor etc complete all as specified and directed. |
| 47 | Material and labour for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in levelling course for laying floor finishes complete all as specified and directed. |
| 48 | Material and labour for providing PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) roof kerbs including benching or mud stops, rounded or chamfered on edges etc including necessary form work and finished the rough surface complete all as specified and directed. |
| 49 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 50 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 51 | Fixing only for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 52 | Material and labour for 12mm thick grandura digital vitrified coloured in matt finish outdoor pavement tiles (good grip series) of size exc 0.11 sqm but n.exc 0.16 sqm, set jointed and pointed in neat cement slurry with grey cement & pigment as in floor, path etc. and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 53 | Material and labour for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate ) as in foundation, flooring, sub base, paving, surface channels, drains complete all as specified and directed. |
| 54 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and directed.Note:- Only inner girth shall be measured for payment. |
| 55 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 56 | Supply and fix in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 57 | Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 58 | Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:4) including demolition of old unserviceable cover slab complete all as specified and directed. |
| 59 | Material and labour for mild steel TMT bars 6 to 8 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 60 | Supply and fix of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing and similar work conforming to Fe-410-W (Gde E quality A ) height upto 10 m including one shop coat of zinc chromate primer paint (including preparation of surface) complete all as specified and directed.. |
| 61 | Material and Labour for welded steel wire fabricof weight n exc 4 kg/sqm supplied and fixed complete to wood or steel members all as specified and directed.. |
| 62 | Greasing, oiling and overhauling of existing steel rolling shutters of any description and in any position up to 10mtr height with header cover box including replacement of damaged curtain laths, lock plate, guide channel, cover etc with suitable locking arrangement and gear box of any description including required spare parts for smooth and proper fuctioning complete all as specified and directed.Note:-Spare parts such as ball bearing and safety lever locks shall be measured and paid seperately under respective items as supply only. |
| 63 | Supply only lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 64 | Supply only ball bearing for rolling shutters complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender