Tender For special Repair Of Tr Hut No T-109, T-111, T-508 And Tc-90 Of 9 Mech Inf At Mil Stn Hisar Under Ge Hisar
Tender Value
37.71 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
15 days left
EMD
75420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Tr Hut No T-109, T-111, T-508 And Tc-90 Of 9 Mech Inf At Mil Stn Hisar Under Ge Hisar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed. |
| 2 | Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed. |
| 3 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and direction of Engr-in-Charge. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and direction of Engr-in-Charge. |
| 5 | Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -In-Charge. |
| 6 | S&F 30 mm thick, factory made wired mesh solid WPC ( Wood Polymer Composite) shutter of consisting density of 600kf /Cum and door to be panelled with SS Mosquito proof mesh and XTN aluminium mesh for addtional strength supplied complete all as specified and directed . |
| 7 | S&F 140 mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 8 | S&F in repairs 20mm dia curtain rails, mild steel, chromium plated with fixing brackets of fancy type all as specified and directed. |
| 9 | S&F Aluminium ( extruded section) door closer hydraucally regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight bettween 61 to 80 kg and fixed, complete all as specified and diected . |
| 10 | S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and as directed. |
| 11 | S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and as directed. |
| 12 | S&F 100 mm long, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed. |
| 13 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m as directed by the Engineer in Charge. |
| 14 | M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) complete all as specified and directed. |
| 15 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:4) but except bricks (Brick shall be obtained from demolition. Unit rate for cleaning of old bricks shall be included in this item) complete all as specified and directed. |
| 16 | M&L for TMT mild steel bars 10 mm dia and over, cut to shape required, including cranking, bending spirally for hooping for coulmns, hooking ends and binding with and including mild steel (annealed) not less than 0.9 mm dia or secuing with clips complete all as specified and directed. |
| 17 | M&L for TMT mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to shape required, including cranking, bending spirally for hooping for coulmns, hooking ends and binding with and including mild steel (annealed) not less than 0.9 mm dia or secuing with clips complete all as specified and directed. |
| 18 | Use and waste of formwork to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed. |
| 19 | M&L for cement concrete design mix M-30 (20 mm graded aggregate) for slabs supported on walls, beams and collumns in floors, roofs, landings, balconies, canopies , deck slabs and in the shelves and the like and all other similar works complete all as specified and directed. |
| 20 | Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 21 | M & L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finished fair and even without using extra cement on ceiling all as specified and directed. |
| 22 | M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 24 | Supply only integral water proofing compound. |
| 25 | M & L for preparing newly plastered surfaces of walls and applying three coats of white wash all as specified and directed. |
| 26 | M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash all as specified and directed. |
| 27 | M & L for preparing newly plastered surfaces of walls and applying one coat of distemper oil emulsion over Chalk whitening, on plastered surfaces, preparatory to distempering all as specified and directed. |
| 28 | M&L for Complete removal of existing treatment of any type from old surfaces of walls all as specified and directed. |
| 29 | M & L for applying one coat of distemper oil emulsion on surfaces of completely removed existing surfaces wall all as specified and directed by Engr-in-Charge. |
| 30 | M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed. |
| 31 | M & L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying two coat of cement base paint on surface of wall/chajja all as specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 33 | M & L 15 mm thick in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 34 | M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed. |
| 35 | M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles as directed. |
| 36 | M&L for glazed ceramic tiles (coloured) 1st quality, 450X 350X 7mm / 300mm x 450mm x 7mm thick , on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over complete all as specified and as directed. |
| 37 | M & L 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Marble/granite including moulding to the edges to shape of bull nose complete all as specified and as directed. |
| 38 | Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 40 | S&F of steel work in tubular trusses and tubular post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and as directed. |
| 41 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 42 | M&L preparation of new steel or Iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 43 | M&L one coat of synthetic enamel paint (1st grade quality) to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete. |
| 44 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges hips valleys as in roof covering complete all as specified and as directed. |
| 45 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick coloured having tensile strngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed. |
| 46 | S&F of pre painted galvatume aluminium zink coating GI based plain steel sheet 0.50mm thick coloured having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified & complete. |
| 47 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and ountersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. WIND TIES for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-16. all as specified and directed. |
| 48 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and as directed. |
| 49 | S&F for GI frame work for ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre with GI Cleat and steel expansion fasteners with and including ceiling section ( not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed tothe intermediate channel with connecting clips acrośs the intermediate channelat 45mm ceṇtre including 4mm thick non asbestos fibre cement building E boards fixed or laid/inserted to GI framework with screws for fixing in 600 mm x 600 mm grid, complete all as required at site complete all as specified and directed. |
| 50 | S&F 5-7mm thick hollow PVC wall lining, (Panelling) single side prelaminated with flat or fancy patterned on laminated side, PVC sheet inclusive of fixing with screws or with solvent cement required at site on walls including necessary corner angles, fillets etc required at site complete all as specified and directed. |
| 51 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 52 | M&L 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed. |
| 53 | M&L broken stone or boulders for hard core of guage n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified & directed complete all as specified and directed. |
| 54 | M&L for 75 mm thick cement concrete type D2, 1:4:8 using 40mm graded stone aggregates as sub base to floor, complete all as specified and directed. |
| 55 | M&L for coloured chequred tiles, glossy finish, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigment, laid over & including 15mm thick screed bed in cement & sand mortar (1:4), complete, all as specified & as directed. |
| 56 | M & L plain cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed. |
| 57 | M&L PCC type C1, 1:3:6 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, hold fast blocks, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed. |
| 58 | S&F Powder coated aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 59 | S&F Powder coated Anodised aluminium windows hunged or sliding shutters and fixed partition, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, tower bolts 02 Nos, handles 02 Nos in each hanged or sliding shutter, hinges, anodised aluminum snap beading screws etc. including provision for cooler/AC opening wherever neccesary, complete all as specified.Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately. |
| 60 | S & F Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples complete all as specified and as directed. |
| 61 | S & F 3 mm thick plane/figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 62 | Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and as directed. |
| 63 | S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 64 | Taking down 15mm bore steel/ composite/ CPVC water tubing and connection from any position wall /ceiling surfaces or concealed including cleaning for re-fixing or removing from site of work complete all as specified and as directed. |
| 65 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 66 | S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and as directed. |
| 67 | S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and as directed. |
| 68 | Taking down soil/waste/vent and rain water pipes including all fittings of any size and pattern in any position complete all as specified and directed. |
| 69 | S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 70 | S&F 50mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm laid (concealed) in trenches after Cutting chases, pinning in and making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, for drain/spouts pipes or other purposes for waste water etc., and making good, cutting not exc 10 cm girth to concrete surfaces/walls,ceilings or in floors/sunken floors etc, complete all as specified and directed. |
| 71 | S & F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary nails, plugs and holder bats etc all as specified and as directed by the Engineer - in - Charge. |
| 72 | S & F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints laid in trenches or in floor (concealed) after Cutting chases, pinning in and making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, for drain/spouts pipes or other purposes for waste water etc., and making good, cutting not exc 10 cm girth to concrete surfaces/walls,ceilings or in floors/sunken floors etc, complete all as specified and directedincluding necessary nails, plugs and holder bats etc all as specified and as directed by the Engineer - in - Charge. |
| 73 | S & F 110 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) all as specified and as directed by the Engineer - in - Charge. |
| 74 | S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 75 | S&F 75 mm bore, PVC (SWR) bends provided with access door of any radius complete all as specified and directed. |
| 76 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 77 | S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. |
| 78 | S&F PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 79 | S&F PVC (SWR) junction, single, (single T) equal or unequal 75mm bore complete all as specified and directed. |
| 80 | S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain grating with/without hole including jointing to waste pipe with solvent cement complete all as specified and directed. |
| 81 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement all as specified and as directed by the Engineer - in - Charge. |
| 82 | S & F in repair Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and seat cover with Mild steel chromium plated hinging device complete. |
| 83 | S& F in repair 15 mm CP 2-in-1 stop cock/bib tap fancy type for fixing of health faucet or jet spray for the WC and complete all as specified and directed. |
| 84 | S& F in repair Brass SS Jet Spray with 1 m pvc tube and complete all as spd and directed. |
| 85 | S&F in repairs health faucet 15mm bore with 1.0 m tube & hook (Braded tube) complete all as specified and as directed |
| 86 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed. |
| 87 | S & F in repair Vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 88 | S&F 40mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm as waste pipe for WHB/Kithcen sink etc., fixed complete by cutting hole into or through brick wall built in CM by using appropirate bend or bottle trap, passing another side of wall, connecting to main waste pipe line and making good in CM (1:3) cutting not exceeding 10cm in girth complete all as specified and directed. |
| 89 | S&F 40mm Bottle trap of PTMT for WHB/Kitchen sink etc. having minimum water seal of 25mm (Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. |
| 90 | S&F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 91 | S&F CP Central Hole Basin Mixer with ‘U’ shape Round Casted Spout with 450 mm Long Braided Hoses complete all as specified and directed. |
| 92 | S&F only 600mm x 450mm bevelled edge mirror of sellected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified. |
| 93 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified. |
| 94 | S&F in repair 15 mm fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 95 | S&F in repair brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed. |
| 96 | S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 97 | S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed. |
| 98 | S&F in repair Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 99 | S&F SS, premium type, peg set 6 heavy weight complete all as specified and directed. |
| 100 | S&F in repairs 15mm bore dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed . |
| 101 | S & F in repairs 15 mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 102 | S&F in repair 15 mm Stop valves/angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 103 | Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed. |
| 104 | M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular press steel/Metal flush box and cover Plate, complete, all as specified & directed. |
| 105 | All as per item No. 104.00 (here-in-before) but one Fan/exhaust fan point controlled by one Number one way switch complete all as specified and directed |
| 106 | All as per item No. 104.00 (here-in-before) but for one 6 Amp socket outlet on independent board controlled by one Number one way switch on independent board. |
| 107 | All as per item No. 104.00 (here-in-before) but for one 6 Amp socket outlet on the same board controlled by one Number one way switch on same board. |
| 108 | All as per srl item No. 104.00 (here-in-before) but for 16 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed. |
| 109 | S&F 1 modular switch 1 way 6 Amp, 230V 1 module all as specified & directed. |
| 110 | S&F 1 modular switch 1 way 16 Amp, 230V 1 module all as specified & directed. |
| 111 | S&F 2 modular Socket, 6A - 2/3 pin combined 230 volts AC complete all as specified |
| 112 | S&F 2 modular Socket 6A/16A - 2/3 pin combined, 230 volts AC complete all as specified |
| 113 | S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 114 | S&F LED light fitting 40W, regal batten for LED including ultra bright glass LED Tubelight with very high efficacy, single / double side connection all as specified and directed. |
| 115 | S&F LED recess mounting panels 2 feet x 2 feet luminaire of capacity 36 watt suitable to be fixed in ceiling having extruded aluminium frame and super bright LEDs complete all as specified and directed. |
| 116 | S&F LED Wall light, regal batten for LED including ultra bright glass with very high efficacy, single / double side connection all as specified and directed. |
| 117 | S&F LED COB Surface Cylinder 7 W, with low power consumption, Driver Efficiency 85%, IP Standard IP20, Beam Angle 600 very high efficacy, connection all as specified and directed. |
| 118 | S&F Building security light LED light fitting 35 watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed. |
| 119 | S&F MCB single pole, 240 volts, 10 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed. |
| 120 | S&F MCB SPN, 240 Volts, 40-63 Amps breaking capacity 10 KA complete all as specified and directed. |
| 121 | S&F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed. |
| 122 | S&F in repair of MCB TPN, 100 Amps 240 Volts, breaking capacity 10 KA complete all as specified and directed. |
| 123 | S&F in repair of sheet metal enclosure distribution board TPN 4 way double door powder coated, protection class IP-42, suitable for mounting MCB,DBs confirming to IS-13032,IS-8632, BS-5484 with min 200 amps rating copper bus bar, complete all as specified and directed. |
| 124 | S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp IP protection 43 having door earthing complete all as specified and directed. |
| 125 | S&F sub main wiring using two runs of single core 4 sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked including PVC conduit dia not less than 20mm (as required & directed by Engr-in-Charge) accessories like bends, tee, etc. and connecting to earth dolly and including one run of 4.0 sqmm earth wire, PVC insulated & unsheathed all as directed. |
| 126 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) including taking out old existing earthing complete all as directed. |
| 127 | Taking out the old unserviceable LT underground cable 10 Sqmm 2 Core 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors from trenches/wall/floor/road/ culverts or pole etc including brick cover complete all as specified and directed. |
| 128 | Supplying, laying, jointing, testing and commissioning of LT UG XLPE cable size 10 sqmm 2 core insulated screened PVC beded galvanised steel strip or wire armoured electric power (heavy duty) with aluminium conductor 1100 volts grade complete of all as specified and directed. (Note :- Cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge. |
| 129 | Supply and laying double wall corrugated pipe (DWC) confirming to IS 19430 Part -I of size 50mm outer dia and 38mm inner dia complete all as specified and as directed |
| 130 | Excavation in trenches in soft/loose/hard/dense soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed. |
| 131 | Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed. |
| 132 | Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe. |
| 133 | Supply and fixing ceiling fans (Copper winding) complete with blades, down rods and accessories, 230V, 1200mm sweep , min air delivery 210 CFM ,BEE five star rated with brushless direct current motor (BLDC) with remote complete all as specified and directed |
| 134 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 135 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender