Tender For Repair/ Replacement Of Floor Tiles & Brick Partition Of Jcos Accn In Bldg. No T-63 Of Engineer Static Workshop Electronics & Mechanical Engineers, Khadki And Replacement Of 06 X Existing Old Doors & 75 X Steel Windows With Aluminium Doors
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
13 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Floor Tiles & Brick Partition Of Jcos Accn In Bldg. No T-63 Of Engineer Static Workshop Electronics & Mechanical Engineers, Khadki And Replacement Of 06 X Existing Old Doors & 75 X Steel Windows With Aluminium Doors & Aluminium Sliding Window In Other Rank (Or) Accn Of Engineer Static Workshop Electronics & Mechanical Engineers, Khadki And Provn Of Chainlink Fencing Around Sho Under Ge (Mh & Rh) Khadki
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed |
| 2 | M & L for 25 mm thick PCC 1 :2 : 4 type B0 ( Using 12.5 graded stone aggregate ) as in base of floors complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick in CM (1:6) Screed bed or bedding layer of mortar for laying floor finishes all as specified and directed. |
| 4 | Ditto all as in item No.3 above but as in skirting /dados including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 5 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile n exceeding 0.11 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick in CM (1:6) Screed bed or bedding layer of mortar for laying floor finishes all as specified and directed. |
| 6 | M&L Coloured Glazed ceramic tiles 450X300X7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 all as specified and directed. |
| 7 | Demolition of brick work or stone masonry or block masonry built in cement or cement/lime mortar. |
| 8 | M&L for PCC solid block masonry of blocks of type C1 (20mm graded stone aggregate) (1:3:6) wall exceeding 10cm in width & built in CM (1:6) complete all as specified and directed. |
| 9 | Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc. |
| 10 | Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed. |
| 11 | M & L for 15 mm thick plastering in cement mortar 1:4 on external plaster finished the surfaces (upto any height) using 3% of WPC of weight of cement used or as per manufacturer instruction complete all as specified and directed. |
| 12 | Material & Labour for preparation to new surface and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified & directed. |
| 13 | M&L for complete removal of existing treatment, preparing the surfaces and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed. |
| 14 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including putty finishing the surface all as specified and directed. |
| 15 | M & L preperation of new plastered surfaces & applying two coats of oil bound distember over a coat of alkali resistant primer. |
| 16 | .M&L for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including chalk whiting preparation of old surfaces , on plastered surfaces prepratary to distempering all as specified. |
| 17 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50m but n. exc 4.00 sqm and refixing in same opening all as specified & directed |
| 18 | Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required. |
| 19 | Ditto-all as above Item No. 18 but 20 mm dia pipe etc. |
| 20 | S & F 15 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to concealed walls and ceilings or laid in floors. |
| 21 | .---- do ---- all as per serial item No. 20 above but except steel tubing. |
| 22 | S & F 20 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 23 | S & F in repair angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm. |
| 24 | S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm but fancy type with long shank and cup ( concealed type) complete all as specified and directed by Engineer in Charge. |
| 25 | S&F in repairs 15mm dia fancy type Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 26 | S & F in repair,Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union |
| 27 | S & F in repairs 15mm dia brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed of make CERA cat par No F 2010403 or techno commercially equivalent models in makes all as specifeied and directed |
| 28 | S&F in repairs fancy type heavy duty health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed.(Make :Jaquar/Hindware/Cera or equivalent). |
| 29 | S&F in repairs fency type two way Bib cock 15mm dia , fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed all as specified and directed (Make :Jaquar/Hindware/Cera or equivalent). |
| 30 | S & F PVC connections 15 mm size with PTMT nuts of 600 mm long |
| 31 | S&F in repair Vitreous china Urinal half stall type white, with grating and union for discharge pipe fixed icluding all reqd necessary fittings as instructions of manufacturers, bottal trap , fixing to existing wall complete all as specified.Make : Jaquar/ Cera/Hindware/ Parryware or equivalent. |
| 32 | S & F in repairs wash down water closet ( European type) excluding fixing bolts, flushing cistern, & flush pipe but including connecting to existing out let pipe etc all as specified and directed. |
| 33 | S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed. |
| 34 | S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 35 | S&F in repairs vitreous china wash basin white, flat back of size 450 x 300mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets all as directed. |
| 36 | S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB / Sink complete all as specified and directed. |
| 37 | S&F in repairs 32 mm bore waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete. |
| 38 | S&F in repair pillar taps fancy type cast copper alloy with capestan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts all as specified and directed. |
| 39 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass,mounted on 6mm thich AC Building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and directed |
| 40 | S&F in repairs tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated all as specified and directed. |
| 41 | M&L 75 mm dia cast iron floors trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), all as specified and directed. |
| 42 | M&L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection all as specified and directed |
| 43 | M & L for 75mm PCC 1:4:8 type D2 ( 40 mm graded aggregates) as ins sub base of floor all as specified & directed. |
| 44 | M&L for Prepolished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment including 20mm thick screed bed in CM 1:6 all as specified and as directed. |
| 45 | S&F in repairs grating square or circular 125mm dia of PTMT (minimum weight 100 gms, all as specified and directed. |
| 46 | Excavation in trenches not exceeding 1.50m wide and 1.50m depth for foundation, etc., for Shaft wells, Manholes etc not exceeding 10sqm on plan and not exceeding 1.50m in depth and getting out in soft / loose soil all as specified and directed. |
| 47 | All as per Item No 46 above, but for depth exceeding 1.5m and not exceeding 3.0 m in soft/loose soil. |
| 48 | Returning filling in including spreading leveling watering well ramming in layers not exceeding 25cm thick with soil obtained from excavation all as directed. |
| 49 | Removing excavated surplus soil not exceeding 50m and depositing where directed at a level exceeding 1.5m above the starting point all as directed. |
| 50 | Demolition and breaking up drain pipes of 150 mm bore RCC/SGSW set in cement mortar including removing the debries to a distance n exc 100m,where directed |
| 51 | All as per item No. 50 above but dia of pipe 200mm. |
| 52 | M&L for PCC M-7.5 grade nominal mix using 40 mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against sides of pipes with concrete after they are laid and bedded dia of pipe 150mm all as specified and directed. |
| 53 | All as per item No. 52 above but dia of pipe 200mm. |
| 54 | M&L for 150mm dia RCC drain pipes class NP2 laid in trenches and jointed with in cement mortar all as specified. |
| 55 | All as per item No. 54 above but dia of pipe 200mm. |
| 56 | S&F RCC precast Sewage manhole cover MD grade of size 450x900mm thickness 25-30 mm and set the same at the site including removing old from site in any position complete all as specified and directed by EIC |
| 57 | S&F RCC Precast round Sewage manhole cover MD Grade of size 560-600mm dia thickness 50-60 mm heavy duty and set the same at the site including removing old from site in any position complete all as specified and directed by EIC |
| 58 | Taking down chowkats without taking off shutter form frame n.exc 1.5 Sqm each all as specified and directed. |
| 59 | Taking down chowkats and frame exc 1.5 Sqm and n.exc 4.0 sqm incl shutter with out taking off shutters from frame and removing from site all as spd and directed by EIC |
| 60 | M & L for 20mm thick Granite slab machine cut in dado/skirting over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including rendering of 10mm thick in CM 1:4. |
| 61 | S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh fittings etc, and necessary locking arrangements and including making good the jambsand painting with matching type and shade complete all as directed Note:- (i) Making good of all wall surface with matching to existing surface internal and external complete all as specified and directed. |
| 62 | S&F in repair (any type & size of door) aluminium anodised door with frame and shutter and glazing 5 mm thick tinted glass or 12 mm thick prelaminated particle board exterior grade/ 6mm thk ACP in panels, rubber gasket, aluminium glazing clips, mortice lock, Aluminium stopper cleat, hydraulic double action floor door spring, iron mongary etc. section of aluminium door including powder coating of any colour (min thickness of powder coating 50 micron) shall be of following sizes:-Frame : 100 x 44 x 1.80 mm thick with rawal plugMiddle lock rail: 100 x 44 x 1.80 mm thickBottom rail : 100 x 44 x 1.80 mm thickTop rail / Style: 46 x 44 x 1.80 mm thickGlazing beading: 0.70 mm thickAluminium handle 'D' type: 150 mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Mortice lock – 100 mm 4 lever,Aluminium stopper cleat Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed.(ii) Making good floor surface after fixed hydraulic double action floor door spring with matching to existing surface complete all as specified and directed. |
| 63 | S&F powder coated Anodised aluminium door shutters aluminium sections weighing 0.55 kg/m including wire mesh necessary joining cleats, glazing clips, rubber neoprene packing, long handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc complete all as specified. |
| 64 | S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed. |
| 65 | Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified. |
| 66 | S &F mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work. |
| 67 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) all as specified & directed |
| 68 | M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified. |
| 69 | M&L Preparation of new or unteated old plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over 3mm thick wall care putty finished even and smooth complete all as specified. |
| 70 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless stell cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed |
| 71 | S&F aluminium extruded section body Door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 36 to 61 kg and fixed all as specified and directed |
| 72 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface as in hard/dense soil. |
| 73 | Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth and getting out in hard/dense soil |
| 74 | M&L Cement concrete in foundations, filling and mass-concrete type C2, 1:3:6, 40mm graded aggregate. |
| 75 | M&L for PCC 1:4:8, type D2 as in foundation concrete using 40 mm graded stone aggregates. |
| 76 | S&F MS posts and struts in fencing of angle iron 50x50x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron 40x6mm fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 Gde E 165. |
| 77 | M&L for mild steel screw bolts 5 to 10 dia of neck in mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long. |
| 78 | Supply only Chain link MS galvanised fencing of 4mm mild steel, GI of 80 x80mm mesh size. |
| 79 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire |
| 80 | S & F round bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified. |
| 81 | M&L preparing new surfaces of steel , any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer. |
| 82 | M&L for brickwork with flyashbricks, old size, straight or curved on plan to any radius in half brick thick walls,built in CM 1:6. |
| 83 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick wall surfaces finishing surfaces even and smooth with out using extra cement. |
| 84 | M&L preparing surfaces of new plastered surfaces and applying two of white wash incl preparation of surfaces. |
| 85 | S & F barbed wire on swan neck all as specified & directed |
| 86 | M&L for excavation by mechanical means ( hydraulic excavator) / in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of site and ramming of bottoms, lift upto 1.5 m including getting out the any kind of rocks and diposal of surplus excavated materials as directed, within a lead of 50 m. |
| 87 | M & L for RCC M-25(1:1:2)n(20 mm graded aggregates for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete |
| 88 | M & L for RCC M-25(1:1:2) (20 mm graded aggregates) for columns, pillars, piers, struts & posts |
| 89 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 90 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions |
| 91 | M & L for mild steel bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, in stirrups, spacers and binders, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 92 | S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 93 | M&L for rendering 5 mm thick in CM 1:4 on fair faces of concrete surfaces |
| 94 | M&L for preparing newly plastered surfaces and providing 3 coats of white wash. |
| 95 | M&L for preparing steel surfaces of any description, over 10cm in width or girth, not otherwise described and providing 2 coats of synthetic enamel paint over a coat of primer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender