Tender For Special Repair To Bldg No P-311A, P-312A, P-357A And P-358A Under Age B/R-I Of Ge Saugor
Tender Value
33.99 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-311A, P-312A, P-357A And P-358A Under Age B/R-I Of Ge Saugor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Sep-2026 |
| 2 | 09-Sep-2026 | Corrigendum No. 02 | BOQ | 22-Sep-2026 |
| 3 | 09-Sep-2026 | Corrigendum No. 01 | Date | 22-Sep-2026 |
| 4 | 29-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 2 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 3 | M&L for Brickwork with sub- class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed |
| 4 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 5 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 6 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4, mixed with liquid WPC @ 200ml Per litre), finishing surfaces even and smooth without using extra cement complete all as specified and directedNote : Water roofing compound shall be measured and paid separately in respective item of this BOQ |
| 7 | M&L for rendering cement plaster, 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | Supply only liquid water proofing compound for mixing in cement mortar or PCC complete all as specified and directed.Note : (i) The WPC compound specified in any item of this BOQ or ordered by Engineer-in-charge (if not mentioned in BOQ item but technically required shall only be measured and paid under this item.(ii) Contractor shall provide purchase vouchers for full quantities incorporated in the work and Engineer-in-charge shall keep defaced purchase vouchers in record and entered the same in MB |
| 9 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 10 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx. thickness 1mm) on newly plastered surface of wall/ceiling as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 11 | M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed. |
| 12 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 13 | M&L for two coats of acrylic exterior weather proof paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 14 | M&L for applying two coats of white wash on old decorated ceiling surfaces including preparation of old surfaces complete all as specified and directed. |
| 15 | M&L for coloured ceramic tiles in floors, 7 to 8 mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 16 | M&L for Non skid fully digital glazed ceramic coloured tiles on vertical surfaces, 8 to 10mm thick, area of each tiles exceeding 0.38 sqm but not exceeding 1.00 sqm (square/ rectangular), fixed with costra tile adhesive cosmic silvwe type 1T (EN-STD C1TE) over and including 10mm thick rendering in CM 1:4 as bedding layer complete all as specified and directed. |
| 17 | M&L for Non skid fully vitrified ceramic coloured stone finish tiles in floors etc, 10mm thick, area of each tiles exc 0.42 sqm but n'exc 1.20 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed.Note : Colour, size and pattern shall be decided and approved by GE |
| 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level), n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 19 | M&L for 25mm thick PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in levelling course to sub base, finished surface rough to receive the tiles complete all as specified and directed. |
| 20 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 21 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection finishing surface even and smooth without using extra cement including providing construction joint (at an interval not more than 3.0m) and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 22 | S&F 60mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment, any shape and size confirming to IS- 15658-2006 of M-35 grade, laid on 50mm thick sand cushion complete all as specified and directed.Note: The cost of sand cushion shall be deemed included in quoted unit rates. |
| 23 | M&L for Dismantling floor, hearth or wall tiling, including cement mortar bedding (but notbacking), any description including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M&L for 16 to 18mm thick Granite slab of any shade (table rubbed and polished), machine cut for floors / shelves in steps, jambs, pillars, window cills & cooking platforms laid over and including 15 mm thick cement mortar 1:4 bedding, pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs, complete all as specified and directed |
| 25 | M&L for rounding to the edge of stone slabs one edges such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 26 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, girth not exc 10 cm complete all as specified and directed. |
| 27 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 28 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single sideprelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fixed in opening as per specification & drawing complete all as specified and directed. |
| 29 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 30 | S&F Factory made uPVG white colour Sliding window (area not exceeding 2.00 sqm each), Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. and 5mm thick glazing with selected quality glass, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.Note: The unit rate quoted by contractor includes cost of glass, wire cloth and all other connected/ required accessories. Net Opening will be measured for payment purpose. |
| 31 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 32 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 33 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed. |
| 34 | S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 35 | S&F 1st class hardwood small fitting such as brackets of any type, latch and hinge blocks, shaped door stopper, shaped door and window stops and the like, including all necessary' labours; articles n- exc 200 cu. cm each complete all as specified and as directed |
| 36 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 37 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 38 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer in-charge. |
| 39 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square, nexc 0.5 sqm in each pane complete all as specified and as directed.. |
| 40 | S&F100mm long stainless steel butt hinges, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 41 | S&F 200mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 42 | S&F 150mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 43 | S&F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel nut & bolts and fixed complete all as specified and directed. |
| 44 | S&F 12 mm thick toughened glass as in urinal partitions, cutting to shape, drilling holes required including figured/ frosted glass film of required pattern/ logo/ shape on one side, all required fixing accessories i.e, stainless steel dash fasteners, stainless steel bolts etca complete all as specified and directed. |
| 45 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank (any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 46 | Dismantling water tanks of capicity exc 500 but n'exc 1000 ltr , any discription and removing from the site complete all as specified and directed. |
| 47 | S&F in repairs 20/25mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 48 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 49 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 50 | S&F Towel Rack 600mm long with Lower Hangers with 3 Hooks, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1181FH) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 51 | S&F in repair purposely moulded looking mirror 5mm thick glass (width not less than 600mm) fixed with studs complete all as specified and directed.Make : Saint-Goblin / Modi Guard / Asahi India (AIS) |
| 52 | S&F Vitreous china Single Piece WC With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 365x675x740 mm, S Trap- 220 mm including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Essco (Cat Part No ECS-WHT-851S220SPPSM) or equivalent in Hindware / Johanson/ Parryware |
| 53 | S&F Vitreous china vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe complete fixed including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Essco (Cat Part No ECS-WHT-451) or equivalent Hindware/ johans/ parryware |
| 54 | S&F Wall Hung Cistern (Compatible with 39mm Drainage Pipes) with Black Top & Installation Kit with Drainage Pipes of require length, connectyion to WC complete including dismantling/taking down existing cistern of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ESH-WHT-184NBTT or equivalent Hindware/ johans/ parryware |
| 55 | S&F Vitreous china Table Top Basin, Size: 425x340x175 mm, white, Including with Waste coupling 32mm Size Half Thread with 130mm Height ,waste pipe, pvc connections and Single Lever Tall Boy with 190mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses with required accessories complete all as specified and directed.Make : Jaquar (Cat Part No CNS-WHT-903-Basin), Cat Part No ALD CHR -709L130-waste), (Cat Part No FUP-CHR-29005BPM-mixer) |
| 56 | S&F in repair Urinal with Spreader Hole and Fixing Accessories , including Spreader, flush pipe. grating and union for discharge pipe set, fixing plugs, bedding urinal on wall in CM 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement, connection to flushing cistern with required accessories complete in all respect as specified and directed by Engr-in-charge. Make Essco (Cat Part No ECS-WHT-253) or equivalent equivalent in Hindware / Johanson/ Parryware |
| 57 | S&F 32mm bore dia bottle trap size with 300 mm & 190mm wall connection pipes & wall flange chromium plated incl required concealed pipe up to trap with required accessories complete in all respect including taking down existing bottle trap/ waste coupling of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-769LX300X190) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 58 | S&F Bib cock with wall flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No FUP-CHR-29037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 59 | S&F in repair 15mm dia SS-304 Heavy Duty Connection Pipe for Wash Basin, Geyser, Hot & Cold Water, Basin Mixer | Leak Proof Flexible Tap Connector Pipe | Rust Free, Durable, Long Life ,,450 mm long, complete all as specified and directed. |
| 60 | S&F 15mm bore 2 Way Bib Cock with Wall Flange chromium plated including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar-(Cat Part No FUP-CHR-29041PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 61 | S&F in repair 15mm bore dia Single Lever Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete in all respect including taking down existing tap of any description, as specified and directed. Make : Jaquar (Cat Part No -FUP-CHR-29011BPM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 62 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer), chromium plated with required accessories complete in all respect including taking down existing Hand Shower of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-577) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 63 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 64 | S&F 15mm bore dia CP Exposed part kit concealed stop cock & flush cock with fitting sleeve, Operating lever & Adjustable wall flange with seal, incl Regular concealed Stop Cock Cold Only Suitable for 15mm Pipeline with Protection Cap including taking down existing stop cock of any description, complete in all respect as specified and directed. Make : Jaguar ( Cat Part No.: exposed part : FUS-CHR-29083K , concealed part : ALD-083R, ALD-083L/ ALD-089R/ ALD-089L/ALD-081) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 65 | S&F Toilet Roll Holder with wall flange , chromium plated with required accessories complete in all respect as including taking down existing Toilet Roll Holder of any description, specified and directed.Make Jaquar (Cat Part No CPA-CHR-1151) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 66 | S&F Single Towel Rail 600mm Long, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1111) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 67 | S&F Soap Dispenser with Glass bottle, chromium plated with required accessories complete in all respect including taking down existing Soap Dispenser of any description, as specified and directed . Make Jaquar (Cat Part No CPA-CHR-1135) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 68 | S&F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System and Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange , chromium plated, fixed to pipe including taking down existing shower rose and arm of any description complete all as specified and directed.Make : Jaguar (Cat Part No.: Shower : OHS-1667 , Arm : SHA-477) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 69 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 70 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 71 | S&F PVC (SWR) bends with access, 110mm bore dia complete all as specified and directed. |
| 72 | S&F PVC (SWR) bends, 75 mm bore dia complete all as specified and directed. |
| 73 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius , with access door, complete all as specified and directed. |
| 74 | S&F 75 mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius. with access door, complete all as specified and directed. |
| 75 | S&F in repair 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 76 | S&F in repairs of 75mm dia PVC (SWR) floor trap SS grating including jointing with solvent cement complete all as specified and directed. |
| 77 | M&L for repair of RCC structure like slab, beam, column, chajja, parapet, landing etc in following steps complete all as specified and directed:-Step 1 : scrapping, cutting, chiselling, de-rusting and clearing exposed reinforcement, surfaces of damages, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforcement to remove loose rust particles and allow to dry it for 2 to 3 hrsStep 2 : insert / fix new reinforcement to damaged portion by drilling holes at required distance, fill the epoxy into the all holes and insert the reinforcement in the hole and binding the reinforcement at rusted portion of reinforcement.Step 3 : applying cement slurry at entire damaged area and plaster the surface with cement and sand mortar 1:3 mixed with polymer liquid @ 15% of cement weight and water as required, mixing properly and plaster the surface finished even and smooth by making the edge water dropping groves Note - Cost of formwork/ scaffolding and polymer liquid shall be deemed included in quoted unit rate. |
| 78 | Demolition of cement concrete (reinforced) below or above the ground floor, not exc 15cm thickness (reinforcement cut as required to facilitate demolition) such as in cooking platform, chajja etc complete all as specified and directed. |
| 79 | M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded aggregate, Nominal mix)) as in slab support on walls beams and columns in floors , roofs , landing balconies deck slab etc complete all as specified and directed. |
| 80 | M&L for use & waste wooden form work to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal/ sloping), rough finished concrete surface, complete all as specified and directed. |
| 81 | M&L for mild steel TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 82 | Mirror polishing on existing marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 83 | Taking down of old damaged roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster, padding from roof surfaces (total thickness n;exc30cm), preparing roof, parapet and gutters, drain mouth etc cleaning by brooming, brushing and watering to make the surface free from all foreign matters such as fungi, moss, dust etc and throw the same to a distance beyond MOD land or as directed by Engineer-in-charge complete all as specified and directed.Note : The work may be ordered in three story buildings. |
| 84 | M&L rendering 10mm thick in cement mortar 1:4 mixed with and including liquid water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab ,complete all as specified and directed.Note : Water roofing compound shall be measured and paid separately in respective item of this BOQ |
| 85 | M&L for water proofing roof treatment to accessible RCC roof with approved modified membrane (MHMDPE film type) of weighing not less than 3 kg/sqm comprising the following items and all as specified:-(i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.(ii).Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iii).Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (iv).Laying of APP membrane with side laps 75 mm ^ end lap 100 mm as per manufacture instruction etc.(v).Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (vi) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded.Note : For technical specification/ properties of APP membrane, workmanship and application process related clause in Particular specification shall be referred. |
| 86 | M&L for GI tubing 20 mm bore medium grade with all fittings laid in tranches including taking down existing tubing of any description complete all as specified and directed complete all as specified and directed |
| 87 | M&L for GI tubing 25 mm bore medium grade with all fittings laid in tranches including taking down existing tubing of any description complete all as specified and directed complete all as specified and directed |
| 88 | Cutting 40mm to 50mm Bore existing steel tubing for alterations or additions (Each cut measured) complete all as specified and directed |
| 89 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 90 | Returning filling in excavated material including spreading, levelling, watering and well ramming in layer n.exc 25 cm thick complete all as specified and directed. |
| 91 | Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 92 | M&L for supply, laying and testing XLPE cable, Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, including taking down existing unserbicible cable of any discription and size complete all as specified and directed. |
| 93 | M&L for supply and laying sand cushioning with local dry and clean sand over and under the cable for protection of cable , 80 mm thick before laying the cable and after laying the cable complete all as specified and directed. Note:- Only punned thickness of 180mm shall be measured for payment. |
| 94 | M&L for supply and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 95 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 96 | Taking down main switch, DB/Change over/VTPN, AC box from wall/ wooden board etc , any description and any capacity with MCB(s) / MCCB(s) including disconnection of electric connections complete all as specified and directed |
| 97 | M&L for concealed point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed. Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 98 | All as per item No. 97 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 99 | All as per item No. 97 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 100 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 101 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 102 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 103 | S&F socket outlet modular 15/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 104 | S&F ceiling rose, surface backlit, three terminal complete all as specified and directed. |
| 105 | S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 106 | S&F MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 107 | S&F MCB SPN 240 volt 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 108 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. |
| 109 | S&F Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ Bajaj - Beam Pro Batten 830412 Philips -Ujjwal/ slim line Batten 919515814053 Orient - LBLN -18-C-SQ |
| 110 | S&F LED bulb 9/10 watt suitable for angle / batten holder fitting complete all as specified and directed.Make\\" havells/ Philips/Bajaj |
| 111 | M&L for Earthing with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers, provision of 40mm GI pipe light grade as watering pipe with funnel and wire mess, 20mm GI pipe light grade as earth lead (GI wire) protection pipe, RCC test chamber with cover, filling charcoal and salt in 15mm thick alternative layer starting from charcoal bottom layer to ensure packed thickness not less than 15 Cm on all sides of earth plate complete all as shown in electric plate no 3, connected to earthing test point including required earth work (excavation, returning filling and removal of surplus excavated soil) and testing on completion complete all as specified, shown/indicated on Drg and as directed by Engg-in-charge. |
| 112 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells - cat no RUGBYGENXFTS10WLED865SSYMBOPC / Bajaj - BIBWP10WLEDOrient - LIBHP-10-C |
| 113 | M&L concealed sub main wiring with two single core 4.0 Sqmm PVC FRLSH insulated unsheathed stranded copper cable (Phase & neutral) and one single core cable of same description as continuous earth wire, drawn in & incl medium grade, ISI marked PVC conduit of suitable size (not less than 20mm dia) with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required) complete all as specified and directed.Note: (i) The cost of cutting chasing pinning for concealed PVC conduit, making good in CM 1:3 and painting so as to match with the adjoining existing surface finish shall be measured and paid separately under respective item of BOQ in this contract)(ii) Proper colour coding of wiring cables (as approved by Engg-in-charge) shall be used/ ensured(iii) Two runs of single core cable (Phase and neutral) and one run of single core cable (earth continuity conductor) & one run of PVC casing -n-capping/pvc conduit shall be measured as one unit length. |
| 114 | S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.Make : Havells - Cat Part No LHEXBLP7IN1W009 or eqvt in bajaj cat part No BCLSB10WH/ CG Cat Part No LCTL-9-CDL |
| 115 | S&F exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans including taking down existing exhaust fans of any description, type a and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells / Crompton / bajaj / philips Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 22, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 22, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 05, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender