Tender For As&As To Flooring With Kota Stone At P-195 (Cook House) At Inhs Kasturi, Station Lonavla. (8479/E8)
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
22 days left
EMD
9900
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for As&As To Flooring With Kota Stone At P-195 (Cook House) At Inhs Kasturi, Station Lonavla. (8479/E8)
BOQ
| Sl. No. | Item Description |
| 1 | M&L Demolition of Unreinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) removing Concrete and rubbish off the premises etc and removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 2 | M&L cement concrete 1;4:8 type D2 (40mm aggregate) 75 mm thick as in sub base |
| 3 | Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified. |
| 4 | M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 8/300x200x8mm thick mm thick set and jointed in neat cement slurry and including 3mm thick Spacer with epoxy Grout pointed in coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4 including refixing electric points and switch boards where as specified and as directed |
| 5 | Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 6 | Formwork to sides of concrete foundation, footings, base of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work, vertical or to better of rough finished surfaces of concrete of flat. |
| 7 | S&F MS TMT bars 10 mm dia & over, cut to length, bent to shape required including cranking and bending and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by Engr-in-Charge. |
| 8 | M&L M-15 (Nominal Mix) with 20mm graded agg in Foundations, including rafts, footings, foundation beams; plinth beams;Plateform, bases for columns, etc; basement slabs, under-reamed piles and mass concrete |
| 9 | M&L for Brickwork with Sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, forming toothing for, and bonding new into old brickwork /stone masonry |
| 10 | M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement) |
| 11 | Supply Integral Water Proofing Compound |
| 12 | M&L for Pre-Polished calibrated Machine cut kota stone slab flooring/Skirting 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15 mm thick screed in CM 1:6 including rubbing and polishing complete |
| 13 | M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed. |
| 14 | M&L for complete removal of old plastered surfaces of walls, ceiling,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats wall care white putty on plastered surface of internal wall and ceiling smooth finish.etc of approved make & shade on walls and other places complete all as specified and as directed.Note-: Rates are inclusive all scafoldings used for up to the height of 4 storeys. |
| 15 | M&L for one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent coats up to 15M height all as directed. |
| 16 | M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface up to 15M height complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender