Tender For special Repair To Bldg No P-87 And P-88 (8Xmd Accn) At R Line Under Ge K Tee.
Tender Value
47.77 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
15 days left
EMD
95540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-87 And P-88 (8Xmd Accn) At R Line Under Ge K Tee.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. |
| 2 | Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 3 | Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 4 | All as in item No. 03 above but as in skirting with and including 10mm backing in cement mortar 1:4 complete all as specified and as directed. |
| 5 | Material and labour for glazed ceramic coloured premium quality tiles 300mm x 450mm, on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in Cement Mortar 1:3 finished even and fair complete all as specified and as directed. |
| 6 | Material and labour for provision of water proofing treatment by using APP torch on non woven polyester film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with and including WPC and two coat of aluminum paint of 0.2 Kg/Sqm (each coat) over membrane taking down existing water proofing treatment including Plain Cement Concrete padding, mortar etc and disposal of rubbish outside of MDcomplete all as specified and directed.Note:- Work to be executed through authorized applicator only. |
| 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 8 | Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200 mm thick (Horizontal or sloping) rough finished surfaces of concrete flat complete all as specified and directed. |
| 9 | Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and directed. |
| 10 | Material and labour for reinforced cement concrete 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 11 | Material and labour for form work to chullah hoods, chajjas, troughs and similar items including edges and similar work complete all as specified and directed. |
| 12 | Material and labour for providing reinforced cement concrete 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed. |
| 13 | S&F milt steel TMT bars 8 mm dia in spacers, cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed. |
| 14 | Material and labour for providing precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water roughs, mangers , shelves and similar articles with plain faces, complete all as specified and directed. |
| 15 | Material and labour for pre-polished Machine cut kota stone slab flooring 20-25 mm thick over and including cement screed base 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete, complete all as specified and directed. |
| 16 | Material and labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4, complete all as specified and directed |
| 17 | Supply and fix pre-polished granite 20mm thick fixed on platform/ shelves/ steps/ cills over and including 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed |
| 18 | Material and labour for machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 19 | Demolitions of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 20 | Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 ( using 40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including mass filling in complete all as specified and directed. |
| 21 | Material and labour for 100 mm thick plain cement concrete type C1, (1:3:6) (using 20mm graded stone aggregate) as in sub , etc finished surface even and fair without using extra cement, complete all as specified and directed. |
| 22 | Material and labour for pre-polished chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed. |
| 23 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed. |
| 24 | Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 25 | All as per item No. 25.00 above but half brick wall in CM 1:4 complete all as specified and as directed. |
| 26 | Material and labour for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed. |
| 27 | Supply and fix wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed. |
| 28 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed |
| 29 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 30 | Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.Note: WPC shall be measured and paid separately. |
| 31 | Supply only liquid water proofing compound complete all as specified and directed. |
| 32 | Material and labour for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 33 | Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note : Rate for form work incl in the rate quoted by the contractor. |
| 34 | Material and Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 35 | Material and labour for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer, over a coat of wall care putty complete all as specified and directed.Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 36 | Material and labour for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of cement Primer and wall care putty complete all as specified and directed.Note:- Scrapping and painting to be executed by mechanical means through authorized applicator of approved make. |
| 37 | Material and labour for complete removal of Existing Treatment and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 38 | Material and labour for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed. |
| 39 | Taking down door / window frame with shutter (without taking of shutter from the frame) area n. exc 1.50 sqm complete all as specified and directed. |
| 40 | Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 41 | Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed. |
| 42 | Supply and fix ( factory made) pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 43 | Supply and fix ( factory made) pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 44 | Material and labour for Plain Cement Concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed. |
| 45 | Supply and fix 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 46 | Supply and fixing 30mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 47 | Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 48 | Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender