Tender For Repairs To Wooden Doors And Windows, Flooring And Allied Works At installation Gmk, Nad, 2W Det, Ncb And Allied Units Under Ge Gomantak
Tender Value
35 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
21 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Wooden Doors And Windows, Flooring And Allied Works At installation Gmk, Nad, 2W Det, Ncb And Allied Units Under Ge Gomantak
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed. |
| 2 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube, edges painted to match prelam sheet and fixed with screws and rawl plugs complete all as specified and directed. |
| 3 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded Prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed. |
| 4 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed. |
| 5 | Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed |
| 6 | M&L for 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 7 | M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 8 | M&L for 35 mm thick factory made, plain framed, panelled shutters (two panels), with lock rail and panels of 9 mm thick BWP commercial ply or 12 mm thick venered particle board with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS : 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 9 | M&L for 2nd class hard wood glazed and skeleton shutters 35 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 10 | S&F aluminium anodised wire mesh of size 1.4 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters complete all as specified and directed. |
| 11 | S&F aluminium anodised barrel tower bolt of extruded section 200 mm long (ISI marked) and fixed complete all as specified and directed. |
| 12 | S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 13 | S&F aluminium handles, fabricated type, anodised, ISI marked 150 mm size complete all as specified and directed. |
| 14 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. |
| 15 | S&F in repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete fixed to wooden/steel frame including necessary welding, cutting, opening etc. complete all as directed. all as directed. |
| 16 | M&L mild steel work as hold fasts and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 17 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in hold fast etc. including necessary form work complete all as specified and directed. |
| 18 | M&L for forming jambs etc to opening, including cutting, toothing proper bonding into old work, also facing, jointing and pointing to match the existing work, new work built in CM 1:6 complete all as specified and directed. |
| 19 | M&L for applying one coat of alkali resistant primer on plastered surfaces of wall over 1.5 mm thick wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed. |
| 20 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm complete all as specified and directed. |
| 21 | Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed |
| 22 | S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium door frame and shutters single/double leaf glazed/ pre-laminated particle board 12 mm thick exterior grade or partly glazed and partly per-laminated board in shutters including aluminium powder coated beading, rubber packing and fixed with suitable size of thrust bolts in wall by drilling and comprising of following:-(a) Door frame made of section 101.6 x 44.45 x 1.93 mm (Cat No. 20146) (b) Vertical section of shutter size – 85 x 44.45 x 2 mm (Cat 19560)(c) Top rail, style shutter 95.25 x 44.45 x 2 mm (Cat 19505) (d) Bottom rail/ middle rail 150 x 44.20 x 2.65 mm (Cat 20006)(g) Aluminium powder coated handle 205 mm long (Cat 29426) 2 Nos. in each shutter(h) Tinted/Plain glass 5 mm thick(j) Pre-laminated particle board 12 mm thick exterior grade(k) Six lever brass mortice lock(l) Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.(m) Aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg.NOTE :- (i) Cat No. mentioned above are of Jindal Make. Contractor can provide any other make as mentioned in List of makes attached with tender documents.(ii) In case of non avalibility of any section next higher size section matching with other sections will be used. |
| 23 | S&F aluminium powder coated (thickness or powder coating not less than 50 micron) frame and shutters for doors/ windows/ ventilators, sliding/ fixed/ openable type complete with necessary fittings such as two concealed lock for each window, roller, hinges etc. wheel etc. including necessary arrangements to receive 4 mm thick glass or wire mesh with aluminium channel beading & stainless steel screws complete all as specified and directed.Note : (a) The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass will be measuerd and paid separately.(b) The rate quoted by the contractor shall also include necessary wheels for sliding shutters and hinges for side hung/top hung shutter as required at sight and concealed locks for windows. (c) The colour of powder coating shall be as approved by GE. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal/aluminium frames glazed with putty or fixed with wooden/aluminium beads/rubber complete all as specified and directed. |
| 25 | M&L for 4 mm thick sheet glass ordinary quality and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 26 | M&L for figured glass, 3 mm thick, pin head type and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares not exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 27 | S&F figured glass(frosted), 4 mm thick, pin head type and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares not exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 28 | S&F in repair curtain rod fancy type, made out of 25mm dia MS conduit pipe duly PVC sleeved, fancy type plastic finial, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50 mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed. |
| 29 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 30 | S&F in repair aluminium anodised barrel tower bolt of extruded section 200 mm long (ISI marked) and fixed complete all as specified and directed. |
| 31 | S&F in repair 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 32 | S&F in repair extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed. |
| 33 | S&F in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. |
| 34 | M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 35 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed. Please Enable Macros to View BoQ information |
| 36 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender