Tender For Provision Of Education Block At Arty Centre Hyderabad.
Tender Value
2.76 Crore
Estimated cost
Bid Submission
01 Oct 2026
9 days left
EMD
3.51 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Education Block At Arty Centre Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part - IBUILDINGS & STRUCTURESThis Schedule contains Sl item No. 1.01 which is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6. |
| 2 | Lumpsum price worked out by the contractor for \\"Construction of education block in Ground + 2 storey with RCC framed structure and including all fittings and fixtures complete all as specified and as shown on drawings..\\" |
| 3 | Lumpsum price worked out by the Contractor for “EARTHWORK AND SITE CLEARANCE as listed in Schedule ‘A’ Part-II Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 2,29,492.86 inserted by the MES in Schedule ‘A’ Part-II |
| 4 | Lumpsum price worked out by the Contractor for “FOOTPATH / HARDSTANDING \\" as listed in Schedule ‘A’ Part-III Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 2,96,823.94 inserted by the MES in Schedule ‘A’ Part- III |
| 5 | Lumpsum price worked out by the Contractor for “SEWAGE DISPOSAL\\" as listed in Schedule ‘A’ Part-IV Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 1,08,110.87 inserted by the MES in Schedule ‘A’ Part- IV |
| 6 | Lumpsum price worked out by the Contractor for “INTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Part-V Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 7,66,996.15 inserted by the MES in Schedule ‘A’ Part- V |
| 7 | Lumpsum price worked out by the Contractor for “INTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part-VI Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 64,965.33 inserted by the MES in Schedule ‘A’ Part- VI |
| 8 | Lumpsum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Part-VII Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 5,56,291.50 inserted by the MES in Schedule ‘A’ Part- VII |
| 9 | Lumpsum price worked out by the Contractor for “EXTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part-VIII Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 2,49,940.77 inserted by the MES in Schedule ‘A’ Part-VIII |
| 10 | Lumpsum price worked out by the Contractor for “FIE FIGHTING\\" as listed in Schedule ‘A’ Part-IX Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 1,02,200.00 inserted by the MES in Schedule ‘A’ Part- IX |
| 11 | Lumpsum price worked out by the Contractor for “COOLING APPLIANCES\\" as listed in Schedule ‘A’ Part-X Representing ** ____ % ____ percent *Above / Below the lumpsum price of ₹ 2,24,603.56 inserted by the MES in Schedule ‘A’ Part- X |
| 12 | Schedule 'A' Part-XIThis Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as ₹0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item Nos. 12.00 to 47.00. |
| 13 | INTERNAL WATER SUPPLYS&F, two way bib tap / cock 15mm bore, chromium plated, fancy type complete all as specified and directed. Make: Jaquar COP-041PM 2-way Bib Cock with Wall Flange or equivalent as approved by GE. |
| 14 | SEWAGE DISPOSALS&F, double walled corrugated pipes of outer dia 160 mm and inner dia 136 mm, SN-18 pipes conforming to IS 16205 (Part 24 - 2018) / IS 14930 and including all necessary packing, special fittings, cutting and jointing complete all as specified and directed. |
| 15 | INTERNAL WATER SUPPLYS&F, two way bib tap / cock 15 mm bore with wall flange, chromium plated, fancy type complete all as specified and directed.Make: Jaquar COP-041PM 2-way Bib Cock with wall Flange or equivalent complete all as specified and directed |
| 16 | EXTERNAL ELECTRIFICATIONSupply and spread in trenches clean manufactured sand for cushioning of cable to the full width of excavated trench, 8 cm thick before laying cable and 15 cm thick above the cable, gently punned down complete all as specified and as directed. Note: Punned thickness only will be considered or payment. |
| 17 | M&L, cutting of road, hard standing made of concrete or premix carpet, WBM, soling and moorum filling not exceeding 45 cm in width not exceeding 75 cm in depth for passing of LT cable and including necessary excavation for laying of cable / pipe and making good the road / hard standing by using all old/new materials and with PCC 1:2:4 using 20 mm graded stone aggregate complete all as specified and directed. |
| 18 | S&F, LED Solar street light fitting 36 Watt and including necessary galvanized steel pole in built, lithium ion battery, solar panel, charger controller with dusk sensor, necessary earthwork excavation, RFR, PCC, coping complete all as specified and directed. |
| 19 | M&L boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique with necessary machine and including HDPE pipe of 150 mm bore suitable for 0.4 mpa working pressure complete all as specified and directed |
| 20 | M&L earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised strip of size 32 mm x 6 mm as earth lead by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe light grade of 40 mm diameter for earth lead protection connected to earthing test point all as shown in electrical plate No. 3 connected to earthing test point and including testing on completion, necessary excavation, earthwork, PCC 1:2:4 earth pit with 10 mm thick CI cover, hinged to CI frame on ground level, 20 mm bore medium grade GI watering pipe, funnel and wire mesh etc., complete all as specified and directed. |
| 21 | Supply, install, testing & commissioning of new outdoor LT feeder panel, factory fabricated, CPRI tested, cubicle type, 3.15 mm thick CRCA sheet vermin proof with 3 phase and neutral aluminium bus bar of current capacity 100 Amp of suitable size, phase and neutral colour coded with heat shrinkable PVC sleeves with necessary supports, angle iron frame work and stand, locking arrangements and painting with one coat of red oxide primer and two coats of powder coated paint, suitable size of panel control copper wiring, accessories fitted on suitable insulator all housed in suitable bus bar chamber and fixing of digital Voltmeter, Ammeter with built in selector switch, CTs of suitable ratio, and pilot indication lamps along with provision of necessary cable entry/exit boxes for all incoming and outgoing cables with suitable cable glands etc on PCC foundation, consisting of the following complete all as specified and directed:- |
| 22 | (a) 4 Pole MCCB 63 Amp, 50Hz, 415V with rupturing capacity 16 kA, adjustable thermal & Magnetic setting (Incoming) - 01(b) 4 Pole MCCB 63 A, 50Hz 415V with rupturing capacity 16 kA, adjustable thermal & Magnetic setting - 01 No (Outgoing to Bldg LT Panel to DB No 1 to 06 - 06 & Standby - 01)(c) 4 Pole ON load change over switch 63 A(d) Three phase digital voltmeter 0-500 Volts with selector switch - 01 Set.(e) Three phase digital Ammeter 0-500 Amps with selector switch - 01 Set.(f) Phase Indicating lamp LED type for Red, Yellow and Blue - 01 Set. |
| 23 | EXTERNAL WATER SUPPLYM&L cutting / boring on the existing CI / GI / DI pipe line of any sizes and reducing to required length before laying and including insertion of new galvanised Tee 80 x 80 x 50 mm for branch connection, necessary jointing material complete all as specified and directed. |
| 24 | M&L, construction of brick masonry valve chamber 600 x 600 x 600 mm inner dimensions with PCC 1:4:8 foundation 150 mm thick, brick work built in CM 1:6, PCC 1:3:6 coping 50 mm thick, plastering 15 mm thick in CM 1:6 to all internal and exposed surfaces and including excavation earthwork in hard / dense soil, mild steel sheet cover 4 mm thick with locking arrangement in PCC and painting to mild steel cover with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 25 | FIRE FIGHTINGS&F booster pumps conforming to IS-12469:1988 with cast iron casing, bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50Hz, 30m head, 450 LPM discharge and including necessary PCC foundation as per manufactures instructions with all accessories complete all as specified and directed. |
| 26 | S&F, gun metal fire brigade inlet connection for connecting to external fire hydrant ring main consisting of two Nos. 63 mm dia instantaneous type male coupling with built in check valves and 150 mm dia, flanged outlet with all accessories complete all as specified and directed. |
| 27 | S&F, automatic air release valve 50 mm dia, conforming to IS, PN 1.0 complete all as specified and directed. |
| 28 | S&F, reflux valve, with by-pass Arrangement, 100 mm (4\\") dia, conforming to IS complete all as specified and directed. |
| 29 | S&F, 6 Kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder, operating temperature ranging from 300 degree C to + 550 Degree C, discharge time not less than 45 seconds, throw not less than 4 meters with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley, mounting accessories along with suitable signage etc, complete all as specified and directed. |
| 30 | S&F, 4.5 Kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas fitted in brand new seamless cylinder, test pressure not less than 250 kgf / Sqcm, operating temperature ranging from 300 Degree C to + 550 degree C with powder coated finish, made out of manganese steel with wheel type valve, discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed. |
| 31 | Supply & Installation of water stored pressure type Fire Extinguisher of 9 litre capacity, fitted with discharge control valve (Squeeze grip type) CE marked and pressure gauge, with discharge hose and open nozzle and including initial charge as per IS: 15683 with ISI mark and wall bracket, fire rating 2A complete all as specified and directed. |
| 32 | COOLING APPLAINCESS&F, voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 1 KVA suitable for water cooler complete all as specified and as directed. |
| 33 | Supply, install, testing & commissioning of desert cooler electric driven, single phase, having nominal airflow capacity of 4000 Cfm per hour (or nearest size) plastic / PVC Body, complete all as specified and directed. |
| 34 | STAND BY SUPPLY (DG SET)Supply, installation, testing & commissioning of 30 KVA/24 KW, (capacity of Generator set shall be net after all due derating factors as per relevant ISI standard), silent Diesel engine Generating Set, 415 volts, 3 phase, 0.8 Power factor, 50 Hz, 4 wire system as per IS 10001/10002 comprising of 30 KVA Generator, developing 1090 BHP @ 1500 RPM, Liquid Cooled, electric start coupled to alternator as per IS 13364 mounted on a common base frame with standard control panel for automatic starting on main control panel having meters, sound proof canopy, integral fuel tank with battery and leads and accessories complete in all respect with CPCB approved acoustic enclosure suitable for ambient condition at Golconda, Hyderabad and including required civil works (except Base for Generator) as per manufacturers instruction and conforming to conditions under IS 10004722/1460 BS 5514/2613/5000 ISO 8526/3046 with following Provisions complete all as specified and directed:- |
| 35 | Alternator: Standard design alternator rated at 30 KVA net output at site after considering derating as per site conditions at 0.8 (lag) power factor AC, 3 phase 4 wire 415 volts 50 Hz, 1500 RPM self excited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load The alternator shall be confirming to Bs 2613/5000 and shall be in position to generate supply with in + 1% tolerance. The alternator will be suitable for tropical climate and shall generally confirm to BS-2613/50001 IS-4722 and as per the following provisions complete all as specified and directed:- Please Enable Macros to View BoQ information |
| 36 | Alternator: Standard design alternator rated at 30 KVA net output at site after considering derating as per site conditions at 0.8 (lag) power factor AC, 3 phase 4 wire 415 volts 50 Hz, 1500 RPM self excited self regulated screen protected drip proof IP 23 enclosure brushless design with winding in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load The alternator shall be confirming to Bs 2613/5000 and shall be in position to generate supply with in + 1% tolerance. The alternator will be suitable for tropical climate and shall generally confirm to BS-2613/50001 IS-4722 and as per the following provisions complete all as specified and directed:- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender