Tender For Provn Of Deficient Kitchen Plate Rack, Kitchen Sink, Cooler Stand And Curtain Rod Including Items In Or Mdd Accn In Bhagat Enclave And Provn Of Fencing At Old Boundary And Water Drainage System At Asha School, Under Age Br-Ii Under Ge Babi
Tender Overview
Project Description
Tender for Provn Of Deficient Kitchen Plate Rack, Kitchen Sink, Cooler Stand And Curtain Rod Including Items In Or Mdd Accn In Bhagat Enclave And Provn Of Fencing At Old Boundary And Water Drainage System At Asha School, Under Age Br-Ii Under Ge Babina.
BOQ
| Sl. No. | Item Description |
| 1 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm; bowl size 410mm x 330mm x 160 mm complete all as specified and directed. |
| 2 | S&F for wall mounted stainless steel Kitchen plate rack (utensils) over all size 750 x 900 X 250mm made with 0.63mm thick SS sheet including necessary stainless steel nuts and bolts complete all as specified and directed. |
| 3 | S&F 25 mm bore SS Pipe curtain rods including SS brackets & SS decorative dome, suitable for door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each end and fixed to wall with wooden battens incl. removal of existing rod and making good complete all as specified and directed. |
| 4 | S&F MS framed work as air cooler stand/ in doors or gates of angle or other section with gusset plates, rails,braces,etc.,complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250) all as directed vy Engineer in Charge. |
| 5 | Cutting holes not exc. half brick in brick walls in mud mortar for inserting MS angle/holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required as directed by Engineer in charge . |
| 6 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10cm width or girth on new steel surfaces including preparation of surfaces complete all as specified and directed |
| 7 | S&F for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified |
| 8 | Supplying and laying of CPVC pipes of outer diameter 20mm of grade SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 9 | S&F 20mm dia CPVC Ball valve fixed to CPVC pipe complete all as specified and as directed. |
| 10 | M&L 18-20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves, cooking platforms, window cills, steps, jambs and pillar top laid over & including 20mm thick screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed. |
| 11 | M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed. |
| 12 | M&L RCC type B0 (1:2:4) using 12.50 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work like RCC chhajjas; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed. |
| 14 | M&L Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 15 | M&L for joint free glazed Coloured tiles 300x600, 7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc including 10 mm screed bed with CM(1:3) complete all as specified and as directed |
| 16 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 17 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 18 | M&L PCC 1:3:6 Type C-1 (using 20 mm graded stone off) as in foundation, filling and mass concrete complete all as specified and directed. |
| 19 | M&L cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in Coping for drains, Parapet wall complete all as specified and as directed. |
| 20 | M &L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed. |
| 21 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed . |
| 22 | M&L for preparation of new iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 23 | S& F Framed work ORNAMENTAL AND INTRICATE DESIGN such as grills, gratings, etc. with ends of barss shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 24 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. |
| 25 | M&L for plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed. |
| 26 | M&L rendering 10 mm thick in cement mortar 1:4 on Brick masonry surface finished even and smooth without using extra cement,complete all as specified and as directed. |
| 27 | Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 28 | Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed. |
| 29 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender