Tender For Special Repair To Building Number P-35 Of Junior Commission Officer Mess
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
6 days left
EMD
86980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building Number P-35 Of Junior Commission Officer Mess
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately. |
| 3 | Supply only integral water proofing compound complete all as specified & as directed by Engineer-in-Charge. |
| 4 | M&L for cement plastering 10 mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 7 | Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 8 | M&L for applying 02 coats of exterior emulsion weather proof paint (light shade) to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommended for under coat by manufacturer of exterior emulsion and primer complete all as specified and directed. |
| 9 | M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed |
| 10 | M& L for applying 02 coats of interior oil bound distemper (light shade) to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of OBD and primer complete all as specified and directed. |
| 11 | Material & labour for preparation of plastered/old plastered surfaces of ceiling and applying three coats of white wash including one coat of primer, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & labour for preparation of newely steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 13 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 14 | Material & labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified. |
| 15 | M & l for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 16 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises |
| 17 | M & L for Non - skid coloured Ceramic tiles 7-8 mm thick (square/ rectangular) area of Each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry @ 3kg per SQM and pointed in white or coloured cement to match, laid over and incl 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 18 | All as per Srl Item No 17 above, but as in skirting 100mm height laid over 10mm thick rendering coat in CM 1:4 set and jointed in neat cement slurry and pointed with white or coloured cement to match, Skirting of same finish as of flooring shall be flush with plaster & all edges properly mitered |
| 19 | M&L coloured glazed ceramic tiles size 450x300x7mm thick laid over 10mm thick rendering coat in CM 1:4, set and jointed in neat cement and pointed in white or coloured cement to match. The dado of same finish as of flooring shall be flush with plaster & all edges properly mitered. |
| 20 | M&L for 7 to 8mm thick Non skid joint free coloured ceramic tiles area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm laid over 15mm thick bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match. |
| 21 | Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed. |
| 22 | Material & labour for machine cut Kota stone slab flooring 18-20 mm thick laid over 15 mm thick cement mortar 1:3 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position as described and specified. |
| 23 | Material and labour for coloured tiles in skirting to match the shade of kota stone flooring laid over 10 mm thick rendering 1:4 and jointed with complete all as specified and directed. |
| 24 | M & L for 18- 20mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick screed in cement mortar (1:4) complete all as specified. |
| 25 | S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed |
| 26 | S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding complete all as specified and directed. |
| 27 | S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed. |
| 28 | Supply & Fixed in repair for vitreous China bowl urinals (back or cornerwall type) complete including providing & fixing plugs bedding urinal against wall in cement mortar 1:2,securing urinals to plugs with &including 60mm long brass screw ,pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe and waste pipe, (Ist quality) with flat back of size 465x355x265mm white with grating and unions for discharge pipe . |
| 29 | S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed. |
| 30 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board or commercial plywood and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified and as directed. |
| 31 | Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 32 | Supplying and laying of 15 mm dia Tubes, 'medium grade',galvanised,with all fittings on walls/ceiling or laying in floors complete all as specified & directed |
| 33 | Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 34 | S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 35 | Supply & fixing in repair overhead shower 125mm size with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified. |
| 36 | Supply & fixing in repair towel rail 20mm dia,D type, 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. |
| 37 | Supply & fixing in repair Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. |
| 38 | Supply & fixing in repair Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs all as specified. |
| 39 | Supply & fixing in repair Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm bore with protection cap fixed in position complete in all respect all as specified. |
| 40 | Supply & fixing in repair Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 41 | S&F in repair stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified . |
| 42 | S&F in repair towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 43 | S&F acrylic glass shelf assembly for soap dish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fiexed to walls with plug and brass chromium plated screws complete all as specified and directed |
| 44 | Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000 ltrs. |
| 45 | S&F tripple layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) white colourd 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and directed. |
| 46 | S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed. |
| 47 | Supply & fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified. |
| 48 | Supply and fix health faucit with 1200mm long flexible mild steel tube 15mm dia with wall hook and compete all as specified and directed. |
| 49 | Supply & fixing PVC connections 15mm size with brass nuts of length 450mm complete all as specified and directed. |
| 50 | Dismentaling of cast iron/pvc soil waste & vent pipes of any dia mm dia incl all fittings etc complete. |
| 51 | Cast iron soil, waste and vent pipe, 100mm bore, Spun pipe cast in any length, with or without ears, with cement joints,fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified. |
| 52 | Cast iron soil, waste and vent pipe, 100mm bore, spun pipe in any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified. |
| 53 | Cast iron soil, waste and vent pipe, 75mm bore, spun pipe in any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified. |
| 54 | S&F Cast iron soil, waste and vent pipe, 75mm bore, spun pipe in any length, with or without ears, with cement joints,laid in wall complete all as specified. |
| 55 | Supply & fixing for CI Cowl suitable for 100 mm bore pipe as in repair, complete all as specified. |
| 56 | Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radius for 75 mm bore pipe, complete all as specified and directed. |
| 57 | Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radius for 100 mm bore pipe, complete all as specified and directed. |
| 58 | Supply & fixing for PVC(SWR) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall complete all as specified and as directed |
| 59 | Supply & fixing PVC (SWR) bends of any radius for 110mm bore as complete all as specified. |
| 60 | Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes for hold fast for new frame and making good to make the existing surface complete all as specified directed. |
| 61 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 62 | Supply & fixing factory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 125x60mm complete as specified and directed. |
| 63 | M&L for Plain cement concrete (1:3:6) type C-0,using 12.5 mm graded crushed stone aggregate as in back filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & fixing factory made flush shutters 35mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 65 | M&L for 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-1 section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed. |
| 66 | Material & labour for Preparation of newly wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 67 | Supply & fixing for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 68 | M&L for Butt hinges 100 mm size, cast brass with mild steel butt hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. |
| 69 | Supply & Fixing Aluminium handles125mm, cast type, anodised complete all as specified and directed. |
| 70 | M&L for Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed |
| 71 | M&L for Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed. |
| 72 | Supply & fixing 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including necessary welding to chowklhats complete fixed all as specified |
| 73 | M&L for Floor door stopper of size 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed. |
| 74 | Supply & fixing stainless Harrison rails 20mm dia mild steel, chromium plated with fixing brackets,furials (02 Nos for each curtain rod), rollers etc for curtain rod incl all fixing complete all as specified and directed by Engineer-in-Charge. |
| 75 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. |
| 76 | Supply and fixing powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, with one or more rebtes including joining cleat for fixing etc… complete all as specified and directed. |
| 77 | Supply and fixing for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws allcomplete as per architectural drawings and the directions of Engineer-in-Chief. |
| 78 | Supply and fixing 5.5 mm thick sheet glass,ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified and as directed. |
| 79 | Supply and fixing Solar control filim 25 micron refective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 80 | Suuply and fixing for prelaminated particle board 12 mm thick interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination complete all as specified and as directed. |
| 81 | Supply and fixing 150 mm length aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 82 | Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf.(c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf and incl hook and eye.Note: complete shutter window will be treated as single uit and paid as single unit |
| 83 | Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 84 | Material & labour for Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in plinth protection/ floor finish, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L for 75mm thick PCC 1:3:6 of type C-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed. |
| 86 | M&L for factory made Chequered cement concrete tiles 20cm x 20cm x 25 mm thick , set, jointed and pointed in neat cement slurry as in floor/path etc over screed bed of 20mm thick CM 1:4 with grey cement and pigments. |
| 87 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 88 | M & L for Framed brackets of angles or tees for cooler stand with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets complete all as specified & directed complete. |
| 89 | Material & labour for Preparation of newly steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 90 | Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturer specifications. Product Make/Chemical: Sikka/Fosroc/Dr Fixit |
| 91 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge. |
| 92 | Demolition of mud phuska on roof any thickness complete all as specified and directed by Engineer-in-Charge. |
| 93 | Material & labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engineer-in-Charge. |
| 94 | Material & labour for PCC 1:3:6, type C-0 using 12.5mm graded stone agg as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 complete all as specified and directed by Engineer-in-Charge. |
| 95 | Material & labour for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over and including bitumen primer @ 0.30 kg / sqm by forced application complete all as specified and directed by Engineer-in-Charge. |
| 96 | Material & labour for factory made cement concrete tiles, ISI marked, 22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement & no pigments. laid over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed by Engineer-in-Charge.Note: WPC will be measered and paid separately |
| 97 | M&L for built in cup boards with pressed steel frame of size 75x45x1.25mm thick and shutter of 1.00 mm thick MS sheet including spray painting 2 coats over a coat of red-oxide primer on steel shurfaces all around all shown on drawing No TD-178 sheet 2/3 to 3/3 dated 12 May 2001 (overall external size of cup board shutter incl frame shall be taken into consideration for the pupose of measurement) including One No hanging rod of CP steel 20mm bore with brackets & two Nos peg set of three pegs each fixed inside the shutter complete fixed in repairs i.e, including taking down and removal of old unserviceable wooden or steel built-in-cupboards incl frame from site all as specified and directed by Engineer-incharge. |
| 98 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed. |
| 99 | Supply & fixing 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on wall to make pvc frame as per specification and drawing. |
| 100 | Supply & fixing Solid PVC wall lininig consisting of 5 mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing, |
| 101 | Providing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm incl both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross - T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried uot as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles complete all as specified and directed by Engineer-in-Charge.. |
| 102 | Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed. |
| 103 | Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engineer in-charge Note-I-(Switches and regulators shall be measured and paid for separately). Note-II- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-III- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -IV - cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. Note:- V- Rate of cutting chasing included in the unit rate quoted for this item |
| 104 | M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed.Note-I- ( Wiring shall be done as per colour code in IS for phase, neutral and earth). Note-II- (The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). Note -III - cost of Eye/bottle thimbles used for connection for 2 way switch is deemed to be included in the unit rate quoted for this item. Note:-III- Rate of cutting chasing included in the unit rate quoted for this item |
| 105 | All as per Sl item No 103.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed. |
| 106 | All as per Sl item No 103.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed. |
| 107 | All as per item No. 103.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board. |
| 108 | Supply & fix in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 109 | Supply & fix in replacement of Modular switch 2 way, 6 Amps, 1 module, 230 volts complete all as specified. |
| 110 | Supply & fix in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified. |
| 111 | Supply & fix in replacement of Modular bell push switch 1 way, 6 Amps, 1 module complete all as specified. |
| 112 | Supply & fix in replacement of Call bell ding dong AC 230 volt single pole complete all as specified. |
| 113 | Supply & fix in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified. |
| 114 | Supply & fix in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified. |
| 115 | Supply & fix in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified. |
| 116 | S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed |
| 117 | Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. |
| 118 | New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 119 | Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge. |
| 120 | M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring. |
| 121 | M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring. |
| 122 | MCCB, 4 Pole, 100 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge. |
| 123 | Supply and fix epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size. |
| 124 | Supply and fix Sheet metal enclosure 12 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP54 protection complete all as specified & directed by Engr-in-charge. |
| 125 | Supply and fix MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 126 | Supply and fix MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge. |
| 127 | M & L for Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497. |
| 128 | Supply and fix Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge. |
| 129 | Supply and fix in replacement of elegatly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existing complete all as specified & directed. |
| 130 | Supply and fix Exhaust fan AC single phase 230/240 v of size 450 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and directed by Engineer-in-Charge. |
| 131 | Supply and fix Electric Water heater (Geyser) storage type of capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum & high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and dirceted by Engineer-in-Charge |
| 132 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 133 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender