Tender For Repairs/Resurfacing Of Roads And Road Furniture At Dhq-1,Icgae,Dhar Ur Under Ge(I) Cg Porbandar
Tender Value
18 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
17 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Porbandar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Resurfacing Of Roads And Road Furniture At Dhq-1,Icgae,Dhar Ur Under Ge(I) Cg Porbandar
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed. |
| 3 | Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, path etc cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal over a priming / tack coat of paving bitumen primer of grade VG-10 at the rate of 5 Kg per 10 Sqm and providing premixed bituminous macadam with crushed and graded stone aggregate mixed together with 4.50% of paving bitumen of grade VG-30 by weight of total mix, well rammed and sealed with binder 9.80 Kg per 10sqm, blinding with 0.09 cum of stone chippings, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of pot holes exceeding 30mm, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for applying evenly a priming/tack coat with bituminous primer of grade VG-10 at the rate of 5 kg per 10 sq metre of road surface by sprayer operated on hot pressure mechanism over old black top surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material & Labour for Bituminous premix Semi Dense Asphaltic Concrete (SDAC) 40mm thick (consolidated thickness) with crushed and graded coarse aggregates as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing plant, laying, spreading uniformly by means of Mechanical paver and rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller to a uniform smooth surfaces complete all as specified and as directed.Notes : (i) The actual requirement of binder shall be as per the job mix formula and test specified. However quantity from the mix formula found more than specified 5.5% same will be provided with no extra cost to the Govt. In case binder content found to be less than 5.5% as per mix formula as specified in Schedule 'A' shall be adjusted @ the rate of 75.30/KG for the less quantity of bitumen used. The quantity of 5.5 % mentioned is exclusive of any wastage and no wastage shall be taken onto account for the purpose of above adjustment.(ii) Rate of carrying out design mix shall be inclusive of rate quoted by the contractor. |
| 6 | Material & Labour for providing,laying, spreading Premix Bituminous macadam, (consolidated thickness not more than 75 mm) with 4.5% paving bitumen binder of VG 30, by weight of total mix including tack coat of 5kg per 10 sqm using VG 10 bitumen heated to required temperature, mixing bitumen macadam in automatic and temperature controlled hot mixing plant,laying, spreading by means of mechanical paver and rolled and compacted to required camber and gradient with 8 to 12 tonne power road roller to a uniform smooth surface as specified and as directed by Engineer-in-Charge.Note : Rate of carrying out design mix shall be inclusive of rate quoted by the contractor. |
| 7 | Material & Labour for painting lines,dashes,arrows, letters,marking of 2 mm thick & width exceeding 10cm or not exceeding 15 cm on new surface or previously treated road surface with hot applied retro reflective thermoplastic road marking paint(white/golden yellow) conforming to MORTH (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree Centigrade including cleaning and drying the existing road surfaces to ensure dust,oil grease and moisture free surfaces before applying paint complete all as specified. |
| 8 | Supply & Fixing in repairs of CAT eyes ABS material 100mm x 100mm x 20mm two side Acrylic plastic reflectors etc including taking down of old u/s cat eyes complete all as specified and as directed. |
| 9 | Supply & Fixing in repairs for Solar Stud 125 x 125 x 25 mm (Model DA 110-DHRUV) aluminium alloy and construction. Solar powered by monocrystal solar panel. Type of Battery : One high capacity Ni-Cd rechargeable battery. View Distance: Approximate 1000 mtrs. LEDs- 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours. Back Up- 12 hours of continuous lighting at night. Red Colour super quality duly fixed with Epoxy including taking down existing complete all as specified and as directed. |
| 10 | Supply & Fixing in repair mild steel round pipe Delineator with reflector white/orange colour reflectors including pre-powder coated MS pipe of 75mm dia x1200mm (900mm below + 300mm GL) height fixed in ground post hole size of 300 x 300 x 300mm with PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) including necessary excavation and earth work along with taking down of old u/s delineator, complete all as specified & directed |
| 11 | Taking down existing CAT eyes studs carefully without damage and refixing the same at the original or approved location,including removal of existing adhesive,cleaning of the road surface, application of approved epoxy/ adhesive,proper alignment,fixing,testing for stability and all labour,tools, tackles, material equipment, traffic management and incidental charges complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | Material & Labour for providing pre-cast rubber/thermoplastic speed breaker of approved size and make, complete with reflective yellow and black markings, hot-dip galvanized anchor bolts,washers and nuts,drilling holes in the existing pavement,fixing firmly in position, including all materials, labour,tools, tackles, material equipment, traffic management and incidental charges,complete as per IRC/MORTH specification and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender