Tender For Repair & Maintenance Of Perimeter / Compound Wall , Fencing , Gate & Pillar , Drain ,Hardstanding ,Culvert , Footpath Etc And Misc B/R Work To Md /Otm Aacn In Trg Area Under Age B&R -Ii Ge Babina.
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
8 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Perimeter / Compound Wall , Fencing , Gate & Pillar , Drain ,Hardstanding ,Culvert , Footpath Etc And Misc B/R Work To Md /Otm Aacn In Trg Area Under Age B&R -Ii Ge Babina.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete unreinforced in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 3 | M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed. |
| 4 | M&L for 1st quality Vitrified Paver Color tiles 40 cmx 40cm x 9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed. |
| 5 | Material and labour for providing and laying 80mm thick factory made ISI MARK chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 6 | Material and labour for providing and laying 60 mm thick factory made ISI MARK chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 7 | M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping on side of Path/Hard Standing including necessary form work etc complete all as specified and directed. |
| 8 | M&L for providing and laying at or near ground level factory made Kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1- cement: 3 -coarse sand), including making joints with or without grooves ( thickness of joints excet at sharp curve shall not more than 5 mm ), including making drainage opening wherever required complete all as specified and directed. |
| 9 | M & L for 40 mm thick ,PCC (1:2:4) Type B1 using 20 mm graded stone aggregate as floor surfaces concrete finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L 18-20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves, cooking platforms, window cills, steps, jambs and pillar top laid over & including 20mm thick screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed. |
| 11 | M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed. |
| 12 | S& F Framed work ORNAMENTAL AND INTRICATE DESIGN such as grills,gratings, etc.. with ends of barss shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 13 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10cm width or girth on new steel surfaces including preparation of surfaces complete all as specified and directed |
| 14 | S&F in repairs 5mm thick to 10 mm thick hollow WPC Lining Fluted panels (including SS clips for Panels) wall panelling colour WPC sheet in strips & channel feathered at the edges for fixing on wpc Wall Lining,Insulated wpcWall Lining, and wpc Partitions inclusive of solvent cement and fixing at site including disconnecting and refixing of electric light board complete all as specified and as directed. Make:- Rajshree , Black cobra or equivalent as approved. |
| 15 | S&F in repairs 5mm thick hollow wall panelling plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent cement and fixing at site including disconnecting and refixing of electric light board complete all as specified and as directed. |
| 16 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 17 | Dismantling of timber in fillets, rails, posts, rafters, purlins etc under 40 Sq. cm provided for complete all as specified and as directed. |
| 18 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil all as directed by Engineer in Charge. |
| 19 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 20 | Surface excavation in any type of soil n.exc 30 cm deep and average 15 cm deep getting out in soft/loose soil complete all as specified and directed. |
| 21 | Dismantling of fencing wire mesh any type ( barbed wire) fixed with steel or wood fillets in any position complete all as specified and directed. |
| 22 | M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 23 | M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed |
| 24 | Supply only, chain link fencing of MS galvanized fencing, galvanized steel wire conforming to IS 280:2006 havingzinc coating of type heavy as laid down in IS 4826, any size or type complete all as specified and directed. |
| 25 | Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed.Note : Supply only chain link fencing and line wire will be measeured and paid separetly. |
| 26 | S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming toFe 290 (Gde E-165). complete all as specified and directed. |
| 27 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 5cm but n.exc 10cm long and dia of neck 11 to 15mm complete all as specified and directed. |
| 28 | S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining , weighing 97 to 106 Kg per Km and fixing to any type of standard rails straining bolts including, securing and tying at crossings with and provisions of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured). |
| 29 | M&L galvanized Concertina coil, duly stretched, maintaing a dia of 600mm, concertina coil placed in Y shape angle iron post erected over boundary wall and fixed to angle iron with 3mm dia GI bearer wire, complete all as specified and as directed at site. |
| 30 | S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290,E-165 , complete all as specified and directed. |
| 31 | M&L precast re-inforced Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes, Shelves etc set in cement mortar 1:6 including necessary form work complete all as specified and directed. |
| 32 | M&L preparation of old decorated surface , nexc 10 cm width or girth of steel with complete removal and applying two coat of synthetic enamel paint over coat of red oxide primer complete complete all as directed by Engineer in Charge. |
| 33 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, sewage line, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft /Loose of soil complete all as specified and directed by the Engr-in-Charge. |
| 34 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in excavated approved earth into trenches around pipe etc complete all as specified and directed by the Engr-in-Charge. |
| 35 | Removing excavated material soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by the Engr-in-Charge. |
| 36 | Demolition of brick work or stone masonary built in cement mortar as any place inclduing drain, mahholes, septic tank and sock well complete all as specified and directed. |
| 37 | M&L for Brick work with fly ash bricks laid dry straight or curved on plan exc 6 m mean radius complete all as specified and as directed. |
| 38 | M&L brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built cement mortar 1:4 but except bricks (Brick shall be obtained from demoltion and cleaning of old bricks etc) including removing cleaning of serviceable bricks complete all as specified and as directed |
| 39 | M&L walling of random rubble uncoursed well bonded bedded and solidlly hearted built in cement mortar 1:4 complete all as specified and as directed |
| 40 | M&L walling of random rubble uncoursed well bonded bedded and solidlly hearted built in cement mortar 1:4 except stone complete all as specified and as directed |
| 41 | M&L for cement concrete type C2 (1:3:6) (using 40mm graded stone aggregate) in surface channels, drains and manholes foundation etc. complete all as specified and as directed |
| 42 | M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on concrete /brick surfaces in CM 1:6, complete all as specified and as directed |
| 43 | M&L for three coat of white wash on newly plastered surface on wall and curing preparation of surface all as specified and directed by the Engr-in-Charge. |
| 44 | M&Lplain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in Coping for drains, complete all as specified and as directed. |
| 45 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using forms, moulds, mitred/ stopped ends etc. all as directed by Engineer in Charge. |
| 46 | M&L plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed. |
| 47 | M&L rendering 10 mm thick in cement mortar 1:4 on Brick masonry surface finished even and smooth without using extra cement,complete all as specified and as directed. |
| 48 | S& F Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately).complete all as specified and directed. |
| 49 | Demolition of existing roof treatment of any description i.e APP membrane, brick tiling including cement mortar OR concrete padding and open up top layer of roof slab (any type) complete removal of debris from site all as directed by Engineer in Charge.Note :- The work is required to be carried out at roof for single/ double storey. The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof for site inspection. The rates quoted shall deemed to be included for these items . |
| 50 | M&L for wire brushing and cleaning top surface of roof slab, flashing and junction of parapet etc including picking, sweeping cleaning and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any other loose material complete. |
| 51 | M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed with polymer modified repair mortar (SBR Latex liquid polymer as per manufacturer direction ) and finishing the surface even and smooth using extra cement as in roof padding to receive roof treatment complete all as specified and directed. |
| 52 | Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 53 | M&L for Concrete angle-fillets of required radiaus shall be provided at junctions between roofs and vertical faces of walls (parapet, pillar for water tank staging and other walls) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners.with cement concrete 1:2:4 (Using 12.5mm stone aggregate) mixed with liquid polymer (SBR Latex liquid polymer will be mixed as per manufactur direction and paid separately) complete all as specified and directed by Engineer in Charge. |
| 54 | Supply only SBR Latex liquid polymer of approved make. |
| 55 | Taking down existing tarfelt and plaster from roof and removing from site all as directed. |
| 56 | M &L For applying water proofing treatment comprising with the following operations :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed. Note: APP Membrane shall be applied through authorised applicator by manufecturer's as approved by GE |
| 57 | M&L applying one coat of aluminium bituminous paint over polymetric membrane complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender