Tender For Comprehensive Maintenance And Periodical Services For Vip Bungalow, Mes Ib And Area Officer Mess Incl Officers Accn And Day To Day B&R Maintenance Services Including Internal Water Supply For Officers Accn Of Area I Under Age B/R (W) Under
Tender Value
99.99 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
25 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance And Periodical Services For Vip Bungalow, Mes Ib And Area Officer Mess Incl Officers Accn And Day To Day B&R Maintenance Services Including Internal Water Supply For Officers Accn Of Area I Under Age B/R (W) Under Ge (W) Colaba, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 2 | Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 3 | M&L for 25mm thk PCC 1:2:4 type B1 using 20mm graded stone aggregate as in subbase of floors complete all as specified. |
| 4 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300mm and 8-10 mm thickness in any pattern of light & dark/ highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 5 | M&L for Non Skid ceramic tiles colour tiles 7 to 9mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified. Note : Work will be in patches or in bulk |
| 6 | M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 10mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. |
| 7 | M & L for digitally Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 10mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. |
| 8 | M & L for Virified Ceramic tiles in skirting 10 mm thick (square/ rectangular) polished, area of each tiles match as the size of floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm backing coat in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. |
| 9 | Material and Labour for heavy duty outdoor vitrified tiles dark or light shade /double charge /ultra charged 12-15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete. |
| 11 | M & L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Work will be in patches or in bulk |
| 12 | M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed. |
| 13 | M & L 20mm thick Granite (of any type) machine cut in, wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including screed bed 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and direceted all as specified and directed. |
| 14 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 15 | Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed. |
| 16 | M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:4) complete all as specified & directed by Engineer-in-Charge. |
| 17 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 18 | M & L for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement complete all as specified and directed . |
| 19 | M & L for rendring 15mm thick in cemet mortar 1:6 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately. |
| 20 | M & L for rendring 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 22 | M&L for preparation of new plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1 mm thickness complete all as specified and directed by Eng-in-charge. |
| 23 | M&L for preparation of new plastered or unplastered surface of wall incl washing/ rubbing down and stopping of old painted surfaces of ncluding cornices etc and making good of holes by filling holes in plastered surfaces with POP and applying one coat of plastic exterior emulsion paint complete all as specified and as directed by Eng-in-Charge. |
| 24 | M&L for preparation of old plastered or unplastered surface of ceiling by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots.and applying one coat of Oil bound distemper on ceiling complete all as specified and directed by Eng-in-charge. |
| 25 | M&L for preparation of old plastered or unplastered surface of wall , cornices by brooming down or steel wire brushing, moss and efflorescent salts and trading oil and greasy spots.and applying one coats of oil bound distemper on wall complete all as specified and directed by Eng-in-charge. |
| 26 | M&L for complete removal of existing treatment & paints including preparation of old plastered or unplastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1 mm thickness complete all as specified and directed by Eng-in-charge. |
| 27 | M&L for prepartion of old painted wood or wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Eng-in Charge. |
| 28 | M&L preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 29 | Material and Labour for French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: \\"Tractor Uno\\" of Asian Paints / \\"Jadoo\\"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE all as specifeid . |
| 30 | S & F in repair 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhsive as per manufacture instruction as in ceiling/coloumns and in vertical surface complete all as specified and directed.approved sample as kept in GE Office. |
| 31 | S & F in repairs frosted film / sunfilm / logo in any type or design and size complete all as specified and directed |
| 32 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 33 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified. |
| 34 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed. |
| 35 | Taking down shutters of any description exc 2.00 sqm each complete all as specified and as directed. |
| 36 | S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete. |
| 37 | S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and as directed. As approved by Accepting Officer. |
| 38 | S&F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, uppling & fixing in the frame at site as per specification & drawing etc all as specified and directed. |
| 39 | Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 70 MM X 45 MM size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position screwed with full body threaded star headed SS screws having complete as per direction of Engineer- in - Charge. |
| 40 | Supplying and fixing factory made 28-30 MM thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 41 | S&F IInd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of timber flate on both sides, with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressed treated. |
| 42 | S&F IInd class hard wood 35mm thick Factory made glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I section 8 clause 8.24 (a) supplied and fixed to chowkats. |
| 43 | S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed. Please Enable Macros to View BoQ information |
| 44 | S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender