Tender For Providing And Repairing Of Cidco N7 Csmc School, Zone No 05, Under The Hindu Hriday Samrat Blasaheb Thakrey Urban Public Welfare Fund.
Tender Value
8.06 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
3 days left
EMD
8061
Bank guarantee accepted
Document Fee
770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Repairing Of Cidco N7 Csmc School, Zone No 05, Under The Hindu Hriday Samrat Blasaheb Thakrey Urban Public Welfare Fund.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick masonry in lime or cement mortar and stacking the materials as directed, with all leads, lifts, etc. |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering, including shoring and strutting, etc., complete. (Lift up to 0.00 to 1.50 m.) By Manual Means. |
| 3 | Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) SSR Item No.21.10 Page No.115 |
| 4 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) SSR Item No.21.14 Page No.116 |
| 5 | Conveying materials ( Murrum, Building Rubish, Earth) for a lead of over 7 Kms. inclusive from the site of excavation to the site of deposition as directed. |
| 6 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete SSR Item No 21.40 Page No. 118 |
| 7 | Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader/paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 – Plant Mix Method and Grading-II Material. |
| 8 | Providing and fixing factory made Hydraulically Pressed Mechanically Vibrated and Compacted Precast Interlocking Cement Concrete Paving Blocks 80 mm thick in M-40 grade of approved size and shape for city streets, small/medium market roads, low volume roads, utility cuts on arterial roads, etc., as specified and as per IS 15658:2006, including cost of all materials, manufacturing, curing, transportation of blocks to work site, loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand/crushed sand of 50 mm thickness, including necessary excavation in all strata, spreading blinding of fine sand over the prepared bed, compacting blocks by plate vibrator, etc., complete. |
| 9 | Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with SCADA with Natural / VSI standard Artificial Sand) SSR Item No 11.04 Page No. 62 |
| 10 | Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete. |
| 11 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailin out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR Item No 25.11 Page No.133 |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR Item No 25.31 Page No.134 |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR Item No 25.50 Page No.135 |
| 14 | Providing and laying Cast in situ / Ready Mix Cement Concrete M20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings, including steel centering, formwork, cover blocks, laying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface, or roughening if special finish is to be provided, and curing etc. complete. |
| 15 | Filling in plinth and floors with approved excavated material in 15cm. To 20cm. Layers including watering and compacting etc. complete. |
| 16 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete .SSR Item No 26.33 Page No.139 |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. omplete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) SSR Item No 24.16 Page No.132 |
| 18 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. PWD SSR 2021-22 It.N : 32.07 |
| 19 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. |
| 20 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wroughtir on hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 21 | Providing and applying two coats of wall care putty on plastered surface, including preparing the surface, filling minor cracks and undulations, sanding smooth, scaffolding and all necessary labour and materials, complete. |
| 22 | Providing and applying priming coat on concrete / masonry / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 23 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old ndnewsurfacesintwocoatsincludingscaffolding,preparingthesurface.(excluding the primer coat)etc. complete. |
| 24 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary IT NO 35.26 |
| 25 | Providing and laying ceramic tiles having size 30 cm x 60 cm, conforming to the corresponding I.S., for dado and skirting in the required position with ready-made adhesive mortar of approved quality on plaster of 1:2 cement mortar, including joint filling with white/colour cement slurry, cleaning, curing, etc., complete. |
| 26 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. One side polish.PWD SSR 2021-22 It.N : 33.37 |
| 27 | Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete. IT NO 42.29 |
| 28 | Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for Kota stone should not exceed 0.05%. (Item to be used with prior permission of Superintending Engineer) |
| 29 | Providing and applying two coats of exterior weather shield paint of approved manufacture and approved colour to the plastered surfaces, including cleaning and preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days, etc., complete. NOTE: For Item Nos. 15 to 18, prior approval of the Superintending Engineer shall be necessary. BDO 35.26 – As directed by the Engineer-in-Charge. (SSR No. 35.26) |
| 30 | Providing and fixing H.D.P. container, one-piece moulded water tank made out of high-density polyethylene and built corrugated, inclusive of delivery up to destination, hoisting and fixing of accessories such as inlet, outlet and overflow pipe, inclusive of all tanks having capacity between 200 litres and 1000 litres, complete. |
| 31 | Providing and constructing brick masonry inspection chamber of size 90 cm x 45 cm x 90 cm, including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels with half round G.S.W. pipes, brick masonry, plastering from inside, and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete, complete. |
| 32 | Providing, laying, fixing and jointing Eco-Drain 160 mm SN-4 Nu-Drain UPVC pipes or equivalent make, manufactured as per EN 13476 or equivalent I.S. 15328, with fittings such as bends, tees, couplers, etc., jointing with rubber lubricant, including necessary excavation, trench refilling with selected excavated material, etc., complete. |
| 33 | Manually clearing blockages from Nahani Traps, Gully Traps, Wash Basins, Sinks and W.C.s using necessary tools, to ensure proper functioning of the same, including removal and disposal of the choked material, etc., complete. |
| 34 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 35 | Manually clearing blockages from underground drainage lines, including inspection chambers, using necessary tools to ensure proper functioning of the line from chamber to chamber, etc., complete. |
| 36 | Providing and fixing 15 mm dia. CPVC pipe on walls, ceiling or floor with necessary fittings, remaking good the demolished portion, etc., complete. Including removing the existing pipeline, if necessary, and conveying and stacking the same in PWD chowky or as directed, etc., complete. |
| 37 | Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.PWD SSR 2021-22 It.N : 42.63 |
| 38 | Providing, laying and fixing 110 mm diameter PVC pipe with all necessary fittings such as bends, tees, reducers, clamps, etc., including excavation, laying in trenches, jointing, testing, backfilling of trenches, and all incidental works complete. The item also includes dismantling and removing the existing pipeline, wherever necessary, and conveying and stacking the dismantled material at the PWD Chowky or at a location as directed by the Engineer-in-Charge, complete. |
| 39 | Providing and fixing 100 mm diameter stabilizer pipe / PVC soil, vent or waste pipe complete with all necessary fittings and fixtures such as bends, tees, single junctions, slotted vents, clamps, etc., including cutting, jointing, fixing, testing, and all incidental works, complete. |
| 40 | Providing and fixing 75 mm diameter stabilizer pipe / PVC soil, vent or waste pipe complete with all necessary fittings and fixtures such as bends, tees, single junctions, slotted vents, clamps, etc., including cutting, jointing, fixing, testing, and all incidental works, complete. |
| 41 | Providing and fixing C.P. angular stop cock with wall flange of approved make, including necessary sockets, union nut, etc., complete as directed by the Engineer-in-Charge. |
| 42 | Providing and fixing 15 mm dia. ball cock, medium type, with PVC float, including sockets and necessary fittings, and testing as per municipal requirements, etc., complete. |
| 43 | Providing and fixing C.P. BIB cock with wall flange of approved make, including necessary sockets, union nut, etc., complete as directed by the Engineer-in-Charge. |
| 44 | Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete.PWD SSR 2021-22 It.N : 42.82 |
| 45 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.PWD SSR 2021-22 It.N : 42.78 |
| 46 | Painting letters upto 20 cm height comp brushes, coir dusting, cleaning, including cost of paint etc complete. |
| 47 | School Library Furniture |
| 48 | Add Royalty Charges- Contractor has to quote on Work Portion Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender